The Anritsu 37369D is a high-performance 2-port Vector Network Analyzer belonging to the Premium Lightning family. Spanning 40 MHz to 40 GHz, it is optimized for active and passive device characterization. Standard configurations include step attenuators, internal bias tees, a high-stability frequency reference, and advanced measurement capabilities such as gain compression and frequency translation software.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | GPIB (System & Dedicated), LAN (10BASE-T/100BASE-TX), Serial, Parallel, VGA Output |
| Display | Color Active Matrix LCD |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 85 to 240 Vac, 48 to 63 Hz, 540 VA maximum |
| Operating Temperature | 0°C to +50°C |
| Dimensions (W×H×D) | 432 mm × 222 mm × 584 mm |
Frequency & Stimulus Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 40 MHz to 40 GHz |
| Frequency Resolution | 1 Hz |
| Number of Test Ports | 2 |
| Test Port Impedance | 50 Ω |
| Source Step Attenuator | Included (Standard) |
| Test Port Attenuator | Included (Standard) |
| High Stability Frequency Reference | Optional (Option 10) |
Hardware Interfaces & Connections
| Parameter | Value |
|---|---|
| Test Port Connector Type | K (female) |
| Internal Bias Tees | Included (Standard) |
| Rear Panel IF Inputs | Optional (Option 15) |
Measurement Capabilities & Calibration
| Parameter | Value |
|---|---|
| Gain Compression Application | Standard |
| Multiple Source Control & Frequency Offset | Standard |
| E/O and O/E Measurements | Supported |
| NxN Calibration Utility | Standard (for Mixer Measurements) |
| Embed/De-Embed Application | Standard |
| Time Domain Analysis Capability | Supported (Optional) |
System, Controller & Storage
| Parameter | Value |
|---|---|
| Upgradability | Configurable to ME7808B millimeter-wave system |
Measurement Capabilities
| Parameter | Value |
|---|---|
| Measurement Points | 2 to 1601 |
| Measurement Channels | 4 |
| Sweep Types | Linear, Log, CW, Power |
Source Performance
| Parameter | Value |
|---|---|
| Power Resolution | 0.01 dB |
| Maximum Output Power (0.04 to 2 GHz) | +5 dBm |
| Maximum Output Power (2 to 20 GHz) | -3 dBm |
| Maximum Output Power (20 to 40 GHz) | -15 dBm |
Storage
| Parameter | Value |
|---|---|
| Internal Storage | Internal hard disk drive, 3.5-inch floppy drive (1.44 MB) |
Interfaces
| Parameter | Value |
|---|---|
| GPIB Interfaces | 2 (System and Dedicated, IEEE 488.2) |
Dynamic Range
| Parameter | Value |
|---|---|
| System Dynamic Range (0.04 to 2 GHz) | 100 dB (at 10 Hz IF BW) |
| System Dynamic Range (2 to 20 GHz) | 100 dB (at 10 Hz IF BW) |
| System Dynamic Range (20 to 40 GHz) | 90 dB (at 10 Hz IF BW) |
Receiver
| Parameter | Value |
|---|---|
| Coherent Receiver Channels | 4 |
Storage & I/O
| Parameter | Value |
|---|---|
| Floppy Disk Drive | 3.5 in (1.44 MB) |
Calibration
| Parameter | Value |
|---|---|
| Supported Calibrations | SOLT, LRL, LRM, TRL, TRM, Offset Short |
Environmental
| Parameter | Value |
|---|---|
| Storage Temperature Range | -40 °C to +75 °C |
Rear Panel I/O
| Parameter | Value |
|---|---|
| VGA Output | 15-pin D-sub (rear panel) |
| Serial Port | 9-pin D-sub (RS-232) |
| Parallel Port | 25-pin female D-sub (Centronics printer interface) |
| External Trigger Input | BNC, TTL-compatible |
Technology
Vector Network Analysis
Applications
Active and passive microwave component characterization, millimeter-wave integration, mixer and converter testing