The Anritsu MS2661C is a synthesized portable spectrum analyzer covering a wide frequency range from 9 kHz to 3 GHz. Designed for signal analysis of radio and other electronic equipment, it offers exceptional basic performance, including a high carrier-to-noise (C/N) ratio, low distortion, and superior frequency and level accuracies. Built-in measure functions facilitate evaluation of radio equipment parameters, such as adjacent channel power, occupied bandwidth, burst average power, and template decision with supporting dual-screen and FM demodulation displays.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | GPIB (IEEE-488), RS-232C, Centronics (Parallel) |
| Display | 5.5-inch color TFT LCD |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 100 to 120 VAC / 200 to 240 VAC (automatic selection), 47.5 to 63 Hz, <= 150 VA |
| Operating Temperature | 0 to 50 °C |
| Dimensions (W×H×D) | 320 mm x 177 mm x 351 mm |
| Weight | 11 kg |
Frequency
| Parameter | Value |
|---|---|
| Frequency Range | 9 kHz to 3 GHz |
| Frequency Span Range | 0 Hz (zero span), 100 Hz to 3 GHz |
| Resolution Bandwidth (RBW) Range | 100 Hz to 3 MHz (1-3 sequence), 5 MHz |
| Video Bandwidth (VBW) Range | 1 Hz to 3 MHz (1-3 sequence) |
| Reference Oscillator Frequency | 10 MHz |
| Reference Oscillator Aging Rate | <= 2 x 10^-6/year |
| Reference Oscillator Temperature Stability | <= 2.5 x 10^-6 (0 to 50 °C) |
| SSB Phase Noise | <= -100 dBc/Hz (at 10 kHz offset, 1 GHz carrier) |
Amplitude
| Parameter | Value |
|---|---|
| Measurement Level Range | Displayed Average Noise Level (DANL) to +30 dBm |
| Maximum Input Power | +30 dBm (with >= 10 dB input attenuation) |
| Input Attenuator Range | 0 to 70 dB (in 10 dB steps) |
| Second Harmonic Distortion | <= -75 dBc (10 MHz to 1.5 GHz, -30 dBm mixer level) |
| Third-order Intermodulation Distortion | <= -75 dBc (10 MHz to 3 GHz, two -30 dBm tones at mixer) |
| Displayed Average Noise Level (DANL) | <= -115 dBm (10 MHz to 3 GHz, RBW 1 kHz, VBW 1 Hz) |
| Frequency Response Flatness | <= +/-0.5 dB (100 kHz to 3 GHz) |
| Resolution Bandwidth Switching Uncertainty | <= +/-0.3 dB (referred to 3 kHz RBW) |
| Amplitude Scales | Log (10, 5, 2, 1 dB/div), Linear |
Sweep and Trigger
| Parameter | Value |
|---|---|
| Sweep Time Range (Span > 0) | 20 ms to 1000 s |
| Sweep Trigger Sources | Free Run, Line, External, Video |
| Detection Modes | Sample, Positive Peak, Negative Peak, Normal |
Inputs and Outputs
| Parameter | Value |
|---|---|
| RF Input Connector | N-type (female), 50 ohms |
| RF Input VSWR | <= 1.5 (100 kHz to 3 GHz, input attenuation >= 10 dB) |
| Calibration Output Signal | 10 MHz, -20 +/-0.3 dBm |
| Calibration Output Connector | BNC (female), 50 ohms |
| Reference Input/Output Connector | BNC (female) |
| Memory Card Interface | PCMCIA Type II (2 slots) |
Measurement Functions
| Parameter | Value |
|---|---|
| Dedicated Measurements | Frequency counter, C/N, Adjacent channel power, Occupied bandwidth, Burst average power, Noise power, Template decision |
| Frequency Counter Resolution | 1 Hz, 10 Hz, 100 Hz, 1 kHz |
| Display Features | Dual-screen display, FM demodulation waveform display |
General and Environmental
| Parameter | Value |
|---|---|
| Storage Temperature Range | -20 to 60 °C |
Options
| Parameter | Value |
|---|---|
| Option 01 Reference Oscillator Stability | <= 2 x 10^-8/day (aging rate) |
| Option 15 Tracking Generator Frequency Range | 9 kHz to 3 GHz |
| Option 15 Tracking Generator Output Level Range | -85 to 0 dBm (0.1 dB steps) |
| Option 04 Fast Sweep Time Range | 100 µs - 19 ms (Span = 0), 1 ms - 19 ms (Span > 0) |
| Option 03 Narrow RBW Selection | 30 Hz, 100 Hz, 300 Hz |
| Option 08 Preamplifier Frequency Range | 100 kHz - 3 GHz |
| Option 08 Preamplifier Gain | 20 dB (typical) |
| Option 05 DC Power Supply Input | 11 - 30 VDC, ≤ 70 W |
| Option 12 Demodulator Audio | Standard feature |
Performance
| Parameter | Value |
|---|---|
| Image Response | ≤ -70 dBc (10 MHz - 3 GHz) |
| Multiple Response | ≤ -70 dBc (10 MHz - 3 GHz) |
| Residual Spurious Response | ≤ -100 dBm (10 MHz - 3 GHz, RF ATT = 0 dB) |
Environmental
| Parameter | Value |
|---|---|
| Operating Humidity | ≤ 85% RH (non-condensing) |
Display
| Parameter | Value |
|---|---|
| Display Type | 5.5-inch color TFT LCD |
Sweep
| Parameter | Value |
|---|---|
| Sweep Modes | Continuous, Single |
Measurement & Trace
| Parameter | Value |
|---|---|
| Trace Functions | Write, Max Hold, Min Hold, View, Averaging |
| Marker Functions | Normal, Delta, Peak Search, Next Peak, Marker to (CF, Ref Level), Multi-marker (up to 10), Zone Marker |
| Frequency Counter Accuracy | ±(Readout frequency × Reference frequency accuracy + 1 LSB + Counter resolution) |
Inputs & Outputs
| Parameter | Value |
|---|---|
| External Reference Input Level | -10 dBm to +15 dBm (50 Ω, BNC female) |
| Reference Output Level | ≥ -2 dBm (10 MHz, 50 Ω, BNC female) |
| External Trigger Input Level | TTL level (BNC female) |
Technology
Synthesized Spectrum Analysis
Applications
RF Signal Analysis and Radio Equipment Evaluation