The Anritsu S332D Site Master is a handheld cable, antenna, and spectrum analyzer designed to install, commission, troubleshoot, and maintain wireless systems. Covering a frequency range of 25 MHz to 4.0 GHz for cable and antenna measurements, and 100 kHz to 3.0 GHz for spectrum analysis, it provides field technicians with a lightweight, rugged instrument to locate feed-line and antenna faults, and to identify RF signal path issues like interference and coverage gaps.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | RS-232 (9-pin D-sub) |
Physical
| Parameter | Value |
|---|---|
| Operating Temperature | -10 °C to 55 °C |
| Weight | 2.28 kg (5.0 lbs) with battery |
Cable and Antenna Analyzer
| Parameter | Value |
|---|---|
| Frequency Range (Cable and Antenna Analyzer) | 25 MHz to 4.0 GHz |
| Frequency Resolution (Cable and Antenna Analyzer) | 100 kHz |
| Frequency Accuracy (Cable and Antenna Analyzer) | ±75 ppm |
| Data Points | 130, 259, 517 selectable |
| Directivity (with precision calibration) | ≥ 42 dB |
| Return Loss Measurement Range | 0 to 60 dB |
| Return Loss Resolution | 0.01 dB |
| VSWR Measurement Range | 1.00 to 65.00 |
| Cable Loss Measurement Range | 0 to 30 dB |
Spectrum Analyzer
| Parameter | Value |
|---|---|
| Frequency Range (Spectrum Analyzer) | 100 kHz to 3.0 GHz |
| Resolution Bandwidth (RBW) Range | 100 Hz to 1 MHz in 1-3 sequence |
| Video Bandwidth (VBW) Range | 3 Hz to 1 MHz in 1-3 sequence |
| SSB Phase Noise | ≤ -75 dBc/Hz at 30 kHz offset at 1 GHz |
| Displayed Average Noise Level (DANL) | ≤ -135 dBm (with preamp on, 100 Hz RBW, at 1 GHz) |
| Dynamic Range | ≥ 85 dB (in 100 Hz RBW) |
Measurement Capabilities
| Parameter | Value |
|---|---|
| Cable/Antenna Measurement Modes | Return Loss, VSWR, Cable Loss, Distance-to-Fault (DTF) Return Loss, DTF VSWR |
| Internal Setup Storage Capacity | Up to 25 setups |
| Distance Units Supported | Feet, Meters |
| Labeling | Alphanumeric labeling of saved measurements |
| Time & Date | Automatic time and date stamp of saved data |
| Companion PC Software | Handheld Software Tools (HST) |
Ports and Connectivity
| Parameter | Value |
|---|---|
| RF Out / Reflect Port Connector | Type N female, 50 Ω |
| RF In / Spectrum Analyzer Port Connector | Type N female, 50 Ω |
| Port Impedance | 50 Ω |
Power Supply and Battery
| Parameter | Value |
|---|---|
| Battery Type | NiMH rechargeable, field replaceable |
Environmental and Compliance
| Parameter | Value |
|---|---|
| Storage Temperature Range | -20 °C to 75 °C |
Options and Accessories
| Parameter | Value |
|---|---|
| Power Monitor Option | Requires external sensor (Option 5) |
| Transmission Measurement Option | Provides 2-port transmission measurements (Option 21) |
| GPS Option | Includes GPS receiver and antenna (Option 31) |
Options
| Parameter | Value |
|---|---|
| Option 5 Power Monitor Detector Compatibility | Anritsu 560-7, 5400-71, and 6400-71 series detectors |
| Option 19 High Accuracy Power Meter Sensor Compatibility | Anritsu PSN50, MA24105A, MA24106A, MA24108A, MA24118A, and MA24126A USB power sensors |
| Option 25 Interference Analyzer Frequency Range | 100 kHz to 3.0 GHz |
| Option 27 Channel Scanner Frequency Range | 100 kHz to 3.0 GHz |
| Option 29 Power Meter Frequency Range | 3 MHz to 3.0 GHz |
Environmental
| Parameter | Value |
|---|---|
| Vibration Standard | MIL-PRF-28800F Class 2 |
| Shock Standard | MIL-PRF-28800F Class 2 |
Technology
RF Cable & Antenna Analyzer and Spectrum Analyzer
Applications
Wireless infrastructure installation, troubleshooting, and maintenance