The ENI 3200L is a high-power, solid-state Class A RF power amplifier designed for laboratory and test applications. It provides a nominal power output of 200 Watts over a wide frequency range of 250 kHz to 150 MHz, delivering highly linear amplification and exceptional ruggedness with the ability to withstand severe load mismatches.
Specifications
General
| Parameter | Value |
|---|---|
| Display | Analog front panel power meter |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 115 / 230 VAC, 50/60 Hz |
| Dimensions (W×H×D) | 483 mm × 222 mm × 546 mm |
| Weight | 31.8 kg |
| Rack Height | 5U |
RF Performance Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 250 kHz to 150 MHz |
| Nominal Power Output | 200 Watts |
| Nominal Gain | 55 dB |
| Gain Flatness | ±1.5 dB |
| Maximum RF Input Power | 20 mW |
| Amplifier Class | Class A |
Port Characteristics
| Parameter | Value |
|---|---|
| Input Impedance | 50 Ω |
| Output Impedance | 50 Ω |
| Input VSWR | < 1.5:1 |
| RF Input Connector | Type N female (front panel) |
| RF Output Connector | Type N female (front panel) |
Protection & Ruggedness
| Parameter | Value |
|---|---|
| Mismatch Protection | Withstands any load VSWR without damage or oscillation |
Physical Characteristics
| Parameter | Value |
|---|---|
| Form Factor | Rackmount |
| Cooling Mechanism | Forced air (internal fans) |
Performance
| Parameter | Value |
|---|---|
| Saturated Power Output | 300 W (typical) |
| Third Order Intercept Point (IP3) | +61 dBm (typical) |
| Duty Cycle | Continuous |
| Stability | Unconditionally stable into any passive load impedance |
RF Specifications
| Parameter | Value |
|---|---|
| RF Coupling | AC coupled |
Technology
Solid State Class A
Applications
RF Power Amplification & Laboratory Testing
Looking for the ENI (Electronic Navigation Industries) 3200L?
Tell us what you need. We're building a network of equipment dealers and will get back to you if we can help source it — no obligation.
Selling this kind of equipment? Sell with us