The Fluke 5700A is a high-precision multifunction calibrator designed to calibrate digital multimeters, voltage standards, and other precision electrical instruments. Released as a standard-setting instrument in metrology, it features direct and alternating voltage, current, and resistance sourcing, and supports Artifact Calibration which minimizes the number of external standards required to maintain full accuracy.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | GPIB (IEEE-488), RS-232-C |
| Sensing Selection | Internal (2-wire) or External (4-wire) |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 100 V / 120 V / 220 V / 240 V AC ±10%, 47 Hz to 63 Hz, 300 VA |
| Operating Temperature | 0 °C to 50 °C |
| Dimensions (W×H×D) | 432 mm × 178 mm × 630 mm |
| Weight | 27.2 |
DC Voltage Specifications
| Parameter | Value |
|---|---|
| DC Voltage Range Limits | 0 to ±1100 V |
| DC Voltage Range Steps | 220 mV, 2.2 V, 22 V, 220 V, 1100 V |
AC Voltage Specifications
| Parameter | Value |
|---|---|
| AC Voltage Range Limits | 220 µV to 1100 V |
| AC Voltage Frequency Range | 10 Hz to 1 MHz |
DC Current Specifications
| Parameter | Value |
|---|---|
| DC Current Range Limits | 0 to ±2.2 A (11 A with 5725A Amplifier) |
| DC Current Range Steps | 220 µA, 2.2 mA, 22 mA, 220 mA, 2.2 A |
AC Current Specifications
| Parameter | Value |
|---|---|
| AC Current Range Limits | 9 µA to 2.2 A (11 A with 5725A Amplifier) |
| AC Current Frequency Range | 10 Hz to 10 kHz |
Resistance Specifications
| Parameter | Value |
|---|---|
| Resistance Nominal Values | 1 Ω, 1.9 Ω, 10 Ω, 19 Ω, 100 Ω, 190 Ω, 1 kΩ, 1.9 kΩ, 10 kΩ, 19 kΩ, 100 kΩ, 190 kΩ, 1 MΩ, 1.9 MΩ, 10 MΩ, 19 MΩ, 100 MΩ |
Wideband AC Voltage (Optional)
| Parameter | Value |
|---|---|
| Wideband AC Voltage Range Limits | 300 µV to 3.5 V (with Option 5700A-03) |
| Wideband AC Voltage Frequency Range | 10 Hz to 30 MHz (with Option 5700A-03) |
| Wideband AC Voltage Output Impedance | 50 Ω (with Option 5700A-03) |
Reference and Calibration
| Parameter | Value |
|---|---|
| Artifact Calibration Standards Required | 10 V DC reference, 1 Ω resistance standard, 10 kΩ resistance standard |
| Artifact Calibration Compatibility | Yes |
Environmental and Standards Compliance
| Parameter | Value |
|---|---|
| Storage Temperature Range | -40 °C to 75 °C |
| Relative Humidity (Non-condensing) | <80% (up to 30 °C), <70% (up to 40 °C), <40% (up to 50 °C) |
| Operating Altitude | 0 to 3050 m (10,000 ft) |
Power Requirements
| Parameter | Value |
|---|---|
| Line Voltage Selection | 100 V / 120 V / 220 V / 240 V AC (±10%, user-selectable) |
| Line Frequency Range | 47 Hz to 63 Hz |
| Maximum Power Consumption | 300 VA |
| Line Voltage Settings | 100 V / 120 V / 220 V / 240 V AC (±10%) |
Options
| Parameter | Value |
|---|---|
| Wideband Output Option | Option 5700A-03 (Adds 10 Hz to 30 MHz output) |
Interfaces & Software
| Parameter | Value |
|---|---|
| Remote Programming Emulation Modes | Fluke 5100B, Fluke 5200A |
Technology
Solid-State Calibration Standard
Applications
Calibration of high-precision digital multimeters up to 7.5 digits