The Keysight (formerly Agilent) 33210A is a highly reliable 10 MHz function and arbitrary waveform generator that delivers exceptional stability, low distortion, and versatile signal generation capabilities. Standard waveforms include sine, square, ramp, triangle, noise, and pulse with variable edge times, with an option (Option 002) for full 14-bit, 50 MSa/s arbitrary waveform generation. Featuring standard USB, GPIB, and LAN (LXI Class C) interfaces, the 33210A easily integrates into automated test environments while providing an intuitive front panel and graphical display for benchtop operation.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | USB 2.0, LAN (LXI Class C), GPIB (IEEE-488.2) |
| Display | Graphical LCD with backlighting (supports text and graph modes) |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 100 - 240 V (±10%) @ 50 - 60 Hz; 100 - 127 V @ 50 - 400 Hz; < 50 VA power consumption |
| Operating Temperature | 0 °C to 55 °C |
| Dimensions (W×H×D) | 261.1 mm × 103.8 mm × 303.2 mm (with bumpers) |
| Weight | 3.4 kg |
Waveform Generation & Frequency
| Parameter | Value |
|---|---|
| Number of Channels | 1 channel |
| Standard Waveforms | Sine, Square, Ramp, Triangle, Pulse, Noise, DC |
| Arbitrary Waveforms | Optional (Option 002) |
| Frequency Resolution | 1 mHz |
Sine Wave Performance
| Parameter | Value |
|---|---|
| Sine Frequency Range | 1 mHz to 10 MHz |
| Sine Amplitude Flatness (< 100 kHz) | ±0.1 dB |
| Sine Amplitude Flatness (100 kHz to 5 MHz) | ±0.15 dB |
| Sine Amplitude Flatness (5 MHz to 10 MHz) | ±0.2 dB |
| Sine Harmonic Distortion (DC to 20 kHz) | -70 dBc @ 1 Vpp |
| Sine Harmonic Distortion (20 kHz to 100 kHz) | -65 dBc @ 1 Vpp |
| Sine Harmonic Distortion (100 kHz to 1 MHz) | -50 dBc @ 1 Vpp |
| Sine Harmonic Distortion (1 MHz to 10 MHz) | -40 dBc @ 1 Vpp |
| Total Harmonic Distortion (DC to 20 kHz) | < 0.04% |
| Spurious Noise (Non-Harmonic, < 10 MHz) | -70 dBc (DC to 1 MHz), -70 dBc + 6 dB/octave (1 MHz to 10 MHz) |
| Phase Noise (10 kHz offset, typical) | -115 dBc/Hz |
Square & Pulse Performance
| Parameter | Value |
|---|---|
| Square Frequency Range | 1 mHz to 10 MHz |
| Square Rise/Fall Time | < 20 ns |
| Square Overshoot | < 2% |
| Square Duty Cycle (to 5 MHz) | 20% to 80% (to 10 MHz) |
| Pulse Frequency Range | 1 mHz to 5 MHz |
Ramp, Triangle, and Noise Performance
| Parameter | Value |
|---|---|
| Ramp/Triangle Frequency Range | 1 mHz to 100 kHz |
| Ramp Linearity | < 0.1% of peak output (to 10 kHz) |
| Ramp Symmetry Range | 0.0% to 100.0% |
| Noise Bandwidth | 7 MHz (typical) |
| Noise Type | White Gaussian |
Arbitrary Waveform Characteristics
| Parameter | Value |
|---|---|
| Arbitrary Vertical Resolution (Option 002) | 14 bits (including sign) |
| Arbitrary Sample Rate (Option 002) | 50 MSa/s |
| Arbitrary Non-Volatile Memory (Option 002) | 4 waveforms of 8k points each |
Modulation, Sweep, and Burst
| Parameter | Value |
|---|---|
| Modulation Types | AM, FM, PM, FSK, PWM |
| AM Modulating Source | Internal or External |
| AM Modulation Depth | 0.0% to 120.0% |
| PM Phase Deviation | 0.0 to 360.0 degrees |
| FSK Keying Rate | 2 mHz to 100 kHz |
| Sweep Type | Linear or Logarithmic |
| Sweep Direction | Up or Down |
| Sweep Time | 1 ms to 500 s |
| Burst Type | Triggered (1 to 50,000 cycles), Infinite, Gated |
| Burst Start/Stop Phase | -360.0 to +360.0 degrees |
| Internal Modulating Frequency | 2 mHz to 20 kHz |
Inputs & Outputs
| Parameter | Value |
|---|---|
| Main Output Impedance | 50 Ω (typical) or High-Z |
| Main Output Amplitude Range (50 Ohm) | 10 mVpp to 10 Vpp |
| Main Output Amplitude Range (Open Circuit) | 20 mVpp to 20 Vpp |
| Main Output DC Offset Range (50 Ohm) | ±5 V pk AC+DC |
| Main Output DC Offset Range (Open Circuit) | ±10 V pk AC+DC |
| Main Output Units | Vpp, Vrms, dBm |
| Main Output Isolation | 42 Vpk to earth |
| Sync Output Impedance | 50 Ω (nominal) |
| External Modulation Input Range | ±5 V full scale |
| External Modulation Input Impedance | 10 kΩ |
| External Trigger Input Level | TTL compatible |
| External Trigger Input Slope | Rising or Falling (selectable) |
System Interfaces & Control
| Parameter | Value |
|---|---|
| Programming Languages | SCPI-1993, IEEE-488.2 |
| State Storage Memory Slots | 4 user-storable states |
Environmental & Regulatory
| Parameter | Value |
|---|---|
| Storage Temperature Range | -30 °C to +70 °C |
| Operating Altitude | Up to 3,000 meters |
| Warm-Up Time | 1 hour |
Trigger Characteristics
| Parameter | Value |
|---|---|
| External Trigger Input Impedance | > 10 kOhm, DC coupled |
| External Trigger Minimum Pulse Width | 100 ns |
| Trigger Output Level | TTL compatible into > 1 kOhm |
| Trigger Output Pulse Width | > 400 ns (typical) |
| Trigger Output Impedance | 50 Ohm (typical) |
General Specifications
| Parameter | Value |
|---|---|
| Main Output Protection | Short-circuit protected; overload automatically disables main output |
| Power Line Frequency | 50 Hz to 60 Hz (100 V to 240 V), 400 Hz (100 V to 127 V) |
| Power Consumption | 50 VA max |
| Acoustic Noise | 30 dBA (typical) |
| LXI Compliance | LXI Class C |
Modulation & Sweep
| Parameter | Value |
|---|---|
| Burst Count Range | 1 to 50,000 cycles, or Infinite |
Pulse Performance
| Parameter | Value |
|---|---|
| Pulse Period Range | 200 ns to 2000 s |
Arbitrary Waveforms
| Parameter | Value |
|---|---|
| Arbitrary Waveform Frequency Range (Option 002) | 1 mHz to 3 MHz |
Main Output
| Parameter | Value |
|---|---|
| Phase Range | -360° to +360° |
Interfaces
| Parameter | Value |
|---|---|
| Web Browser Control Interface | Built-in Web Server |
Options
| Parameter | Value |
|---|---|
| Phase-Lock Timebase Reference Option | Option 001 |
Modulation
| Parameter | Value |
|---|---|
| FM Modulation Source | Internal / External |
| PM Modulation Source | Internal / External |
| FSK Modulation Source | Internal / External |
Technology
Direct Digital Synthesis (DDS)
Applications
Electronic testing, sensor simulation, education, R&D, and automated test system integration