The Keysight (Agilent) 33220A is a single‑channel 20 MHz function/arbitrary waveform generator for benchtop test and measurement. It provides standard functions, pulse generation with variable edge, and 14‑bit arbitrary waveforms at up to 50 MSa/s with 64 Kpoints of memory.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | USB, GPIB, LAN |
| Display | Graphical LCD with graph mode |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 100–240 VAC, 50/60 Hz (autoranging) |
| Operating Temperature | 0 °C to 55 °C |
General Signal Generation
| Parameter | Value |
|---|---|
| Channels | 1 |
| Standard waveforms | Sine, square, ramp, pulse, noise, DC |
| Pulse waveform | Pulse generation with variable edge |
| Arbitrary waveform capability | Yes (user‑defined arb) |
| Output impedance | 50 Ω nominal |
| Amplitude range (High Z) | 20 mVpp to 20 Vpp |
| Amplitude range (50 Ω) | 10 mVpp to 10 Vpp |
| DC offset range (High Z) | ±10 V |
| DC offset range (50 Ω) | ±5 V |
| Sine and square capability | 20 MHz sine and square waveforms |
| Ramp/triangle capability | Ramp and triangle waveforms |
| Noise waveform (built‑in) | Noise waveform available |
| DC waveform | DC output waveform available |
Sine Wave Performance
| Parameter | Value |
|---|---|
| Max sine frequency | 20 MHz |
Square and Pulse Performance
| Parameter | Value |
|---|---|
| Max square frequency | 20 MHz |
Arbitrary Waveform
| Parameter | Value |
|---|---|
| Sample rate (arb) | 50 MSa/s |
| Vertical resolution (arb) | 14‑bit |
| Memory depth (arb) | 64 Kpoints |
Modulation, Sweep, and Burst
| Parameter | Value |
|---|---|
| Modulation types | AM, FM, PM, FSK, PWM |
| Sweep types | Linear, logarithmic |
| Burst | Burst operation supported |
I/O and Interfaces
| Parameter | Value |
|---|---|
| Main output connector | BNC |
| Remote interfaces (included) | USB, GPIB, LAN |
User Interface and Storage
| Parameter | Value |
|---|---|
| Display capability | Graph mode for visual verification of signal settings |
Software and Drivers
| Parameter | Value |
|---|---|
| Remote programming | SCPI command set |
| Instrument control software | IntuiLink software included |
| Waveform editor compatibility | IntuiLink Waveform Editor add‑in |
Power and Physical
| Parameter | Value |
|---|---|
| Power input | 100–240 VAC, 50/60 Hz |