The Agilent/Keysight 4396B is a highly versatile combination analyzer that integrates high-performance vector network, spectrum, and optional impedance analysis into a single instrument. Designed for both laboratory research and production environments, it covers a frequency range of 100 kHz to 1.8 GHz for network and impedance measurements, and 2 Hz to 1.8 GHz for spectrum analysis. Its fully synthesized local oscillator and direct A/D conversion yield outstanding measurement accuracy, very fast sweep speeds, and wide dynamic range. With features like dual-channel split-screen viewing, a color TFT display, and built-in IBASIC automation, the 4396B excels in evaluating components, circuits, and systems where multiple types of RF characterizations are essential.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | GPIB |
| Display | Color TFT LCD |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 90 - 132 V / 198 - 264 V, 47 - 63 Hz, 300 VA max |
| Operating Temperature | 0 to 40 |
| Dimensions (W×H×D) | 425 × 235 × 553 |
| Weight | 21.5 |
General Characteristics
| Parameter | Value |
|---|---|
| Measurement Modes | Vector Network, Spectrum, Impedance (Configuration dependent) |
| System Impedance | 50 Ω |
| Internal Data Storage | Built-in disk drive and RAM disk |
Network Analysis: Source Characteristics
| Parameter | Value |
|---|---|
| Frequency Range | 100 kHz - 1.8 GHz |
| Frequency Resolution | 1 mHz |
| Output Power Range | -60 to +20 dBm |
| Output Power Resolution | 0.1 dB |
Spectrum Analysis: Frequency Characteristics
| Parameter | Value |
|---|---|
| Resolution Bandwidth (RBW) Range | 1 Hz - 3 MHz (1-3-10 sequence) |
| Phase Noise (SSB) | <-105 dBc/Hz @ 10 kHz offset (fc < 1 GHz) |
Data Processing and Analysis
| Parameter | Value |
|---|---|
| Time-Gated Spectrum Analysis | Supported (Option dependent) |
| Automation Environment | Built-in IBASIC |
Network Analyzer Performance
| Parameter | Value |
|---|---|
| Transmission Dynamic Range | > 120 dB (Network Analyzer mode, 10 Hz IF BW) |
Inputs & Outputs
| Parameter | Value |
|---|---|
| External Reference Input | 10 MHz (BNC female) |
| Internal Reference Output | 10 MHz (BNC female) |
| Probe Power Output | +15 V (150 mA max), -12.6 V (150 mA max) |
| External Trigger Input | BNC(f), TTL level |
Impedance Analyzer (Option 010)
| Parameter | Value |
|---|---|
| Impedance Measurement Parameters | |Z|, |Y|, θ, R, X, G, B, L, C, D, Q (Requires Option 010) |
| Impedance Frequency Range | 100 kHz to 1.8 GHz (Requires Option 010) |
Network Analyzer Specifications
| Parameter | Value |
|---|---|
| IF Bandwidth (IFBW) | 10 Hz to 40 kHz (1, 3, 10 steps) |
| Measurement Formats | Log magnitude, linear magnitude, phase, expanded phase, group delay, Smith chart, polar, SWR, real, imaginary |
| Calibration Types | Response, response & isolation, 1-port, full 2-port (with optional S-parameter test set) |
| Supported S-Parameter Test Sets | Keysight 85046A/B, 87512A/B (requires 50 or 75 ohm configuration) |
Spectrum Analyzer Specifications
| Parameter | Value |
|---|---|
| Input Attenuator Range | 0 to 50 dB in 10 dB steps |
Source Specifications
| Parameter | Value |
|---|---|
| Sweep Types | Linear frequency, log frequency, list frequency, CW time, power sweep |
Frequency Specifications
| Parameter | Value |
|---|---|
| Reference Frequency Accuracy | ±5.5 ppm standard; ±0.13 ppm with Option 1D5 (High Stability Frequency Reference) |
General Specifications
| Parameter | Value |
|---|---|
| Display Channels | 2 independent measurement channels |
| Maximum Power Consumption | 300 VA max |
| Warm-Up Time | 30 minutes |
Technology
Combination Vector Network & Spectrum Analyzer
Applications
RF component evaluation, circuit design, production test, gain and phase measurement, signal distortion and noise analysis