The Agilent/Keysight 4396B is a highly versatile combination analyzer that integrates high-performance vector network, spectrum, and optional impedance analysis into a single instrument. Designed for both laboratory research and production environments, it covers a frequency range of 100 kHz to 1.8 GHz for network and impedance measurements, and 2 Hz to 1.8 GHz for spectrum analysis. Its fully synthesized local oscillator and direct A/D conversion yield outstanding measurement accuracy, very fast sweep speeds, and wide dynamic range. With features like dual-channel split-screen viewing, a color TFT display, and built-in IBASIC automation, the 4396B excels in evaluating components, circuits, and systems where multiple types of RF characterizations are essential.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | GPIB |
| Display | Color TFT LCD |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 90 - 132 V / 198 - 264 V, 47 - 63 Hz, 300 VA max |
| Operating Temperature | 0 to 40 |
| Dimensions (W×H×D) | 425 × 235 × 553 |
| Weight | 21.5 |
General Characteristics
| Parameter | Value |
|---|---|
| Measurement Modes | Vector Network, Spectrum, Impedance (Configuration dependent) |
| System Impedance | 50 Ω |
| Internal Data Storage | Built-in disk drive and RAM disk |
Network Analysis: Source Characteristics
| Parameter | Value |
|---|---|
| Frequency Range | 100 kHz - 1.8 GHz |
| Frequency Resolution | 1 mHz |
| Output Power Range | -60 to +20 dBm |
| Output Power Resolution | 0.1 dB |
Spectrum Analysis: Frequency Characteristics
| Parameter | Value |
|---|---|
| Resolution Bandwidth (RBW) Range | 1 Hz - 3 MHz (1-3-10 sequence) |
| Phase Noise (SSB) | <-105 dBc/Hz @ 10 kHz offset (fc < 1 GHz) |
Data Processing and Analysis
| Parameter | Value |
|---|---|
| Time-Gated Spectrum Analysis | Supported (Option dependent) |
| Automation Environment | Built-in IBASIC |
Network Analyzer Performance
| Parameter | Value |
|---|---|
| Transmission Dynamic Range | > 120 dB (Network Analyzer mode, 10 Hz IF BW) |
Inputs & Outputs
| Parameter | Value |
|---|---|
| External Reference Input | 10 MHz (BNC female) |
| Internal Reference Output | 10 MHz (BNC female) |
| Probe Power Output | +15 V (150 mA max), -12.6 V (150 mA max) |
| External Trigger Input | BNC(f), TTL level |
Impedance Analyzer (Option 010)
| Parameter | Value |
|---|---|
| Impedance Measurement Parameters | |Z|, |Y|, θ, R, X, G, B, L, C, D, Q (Requires Option 010) |
| Impedance Frequency Range | 100 kHz to 1.8 GHz (Requires Option 010) |
Network Analyzer Specifications
| Parameter | Value |
|---|---|
| IF Bandwidth (IFBW) | 10 Hz to 40 kHz (1, 3, 10 steps) |
| Measurement Formats | Log magnitude, linear magnitude, phase, expanded phase, group delay, Smith chart, polar, SWR, real, imaginary |
| Calibration Types | Response, response & isolation, 1-port, full 2-port (with optional S-parameter test set) |
| Supported S-Parameter Test Sets | Keysight 85046A/B, 87512A/B (requires 50 or 75 ohm configuration) |
Spectrum Analyzer Specifications
| Parameter | Value |
|---|---|
| Input Attenuator Range | 0 to 50 dB in 10 dB steps |
Source Specifications
| Parameter | Value |
|---|---|
| Sweep Types | Linear frequency, log frequency, list frequency, CW time, power sweep |
Frequency Specifications
| Parameter | Value |
|---|---|
| Reference Frequency Accuracy | ±5.5 ppm standard; ±0.13 ppm with Option 1D5 (High Stability Frequency Reference) |
General Specifications
| Parameter | Value |
|---|---|
| Display Channels | 2 independent measurement channels |
| Maximum Power Consumption | 300 VA max |
| Warm-Up Time | 30 minutes |
Technology
Combination Vector Network & Spectrum Analyzer
Applications
RF component evaluation, circuit design, production test, gain and phase measurement, signal distortion and noise analysis
Looking for the Keysight Technologies (Agilent HP) 4396B?
Tell us what you need. We're building a network of equipment dealers and will get back to you if we can help source it — no obligation.
Selling this kind of equipment? Sell with us