The Keysight Agilent HP 54602B is a 150 MHz, 4-channel (2+2) digital storage oscilloscope from the classic 54600 series. Designed to combine the immediate response of an analog scope with the precision and storage capabilities of a digital instrument, it is a highly reliable tool for bench troubleshooting and educational laboratories.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | None standard; GPIB (HP-IB), RS-232, or parallel available via optional HP 54650-series plug-in modules |
| Display | 7-inch monochrome raster CRT |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 100 to 240 VAC (±10%), 45 to 440 Hz, 120 VA maximum |
| Operating Temperature | 0 to +55 °C |
| Dimensions (W×H×D) | 322 mm × 172 mm × 317 mm |
| Weight | 6.2 |
Vertical System - Analog Channels
| Parameter | Value |
|---|---|
| Analog Bandwidth (Channels 1 & 2) | 150 MHz |
| Analog Bandwidth (Channels 3 & 4) | 250 MHz |
| Calculated Rise Time (Channels 1 & 2) | < 2.33 ns |
| Calculated Rise Time (Channels 3 & 4) | < 1.4 ns |
| Number of Input Channels | 4 (2 + 2 configuration) |
| Input Coupling (Channels 1 & 2) | AC, DC, GND |
| Input Coupling (Channels 3 & 4) | DC |
| Input Impedance (Channels 1 & 2) | 1 MΩ || ~13 pF |
| Input Impedance (Channels 3 & 4) | 1 MΩ || ~13 pF |
| Input Sensitivity Range (Channels 1 & 2) | 2 mV/div to 5 V/div (expandable to 1 mV/div with vernier) |
| Input Sensitivity (Channels 3 & 4) | 0.1 V/div and 1 V/div |
| Vertical Resolution | 8 bits |
| Maximum Input Voltage | 400 V (DC + peak AC) |
| DC Gain Accuracy | ±1.5% |
Horizontal System
| Parameter | Value |
|---|---|
| Timebase Range | 2 ns/div to 5 s/div |
| Timebase Accuracy | ±0.015% |
| Horizontal Resolution | 100 ps |
Acquisition System
| Parameter | Value |
|---|---|
| Maximum Real-Time Sample Rate | 20 MSa/s |
| Maximum Repetitive Sample Rate | 1.6 GSa/s |
| Maximum Record Length | 4,000 points per channel |
| Acquisition Modes | Normal, Peak Detect, Averaging |
| Peak Detect Glitch Capture | Captures glitches as narrow as 50 ns |
Trigger System
| Parameter | Value |
|---|---|
| Trigger Sources | Channels 1, 2, 3, 4, Line |
| Trigger Modes | Auto, Auto Level, Normal, Single |
| Trigger Coupling | DC, AC, LF Reject, HF Reject, Noise Reject |
| Trigger Sensitivity (DC to 25 MHz) | 0.35 div or 3.5 mV |
| Trigger Sensitivity (25 MHz to 150 MHz) | 1.0 div or 10 mV |
| Standard Trigger Types | Edge, TV (NTSC, PAL, SECAM) |
Waveform Measurements and Analysis
| Parameter | Value |
|---|---|
| Automatic Voltage Measurements | Vp-p, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms |
| Automatic Time Measurements | Period, Frequency, Rise time, Fall time, +Width, -Width, Duty cycle |
| Waveform Math Operators | Channel 1 + Channel 2, Channel 1 - Channel 2 |
Display and User Interface
| Parameter | Value |
|---|---|
| Display Size | 7-inch diagonal |
| Graticule Format | 8 × 10 divisions |
Connectivity and Interfaces
| Parameter | Value |
|---|---|
| Rear Expansion Slot | Accepts HP 54650-series interface and measurement enhancement modules |
Power Specifications
| Parameter | Value |
|---|---|
| Power Voltage Range | 100 to 240 VAC |
| Power Frequency Range | 45 to 440 Hz |
| Power Consumption | 220 VA maximum |
Environmental and Compliance
| Parameter | Value |
|---|---|
| Operating Temperature Range | 0 to +55 °C |
| Non-Operating Temperature Range | -40 to +70 °C |
| Operating Humidity | 95% RH at 40 °C |
| Operating Altitude | Up to 4,500 meters |
Physical Characteristics
| Parameter | Value |
|---|---|
| Form Factor | Benchtop |
Storage
| Parameter | Value |
|---|---|
| Non-Volatile Setup Storage | 16 setups |
| Non-Volatile Waveform Storage | 4 waveforms |
Triggering
| Parameter | Value |
|---|---|
| Trigger Holdoff Range | 200 ns to 13 s |
| Trigger HF Reject Filter | 50 kHz low-pass |
| Trigger LF Reject Filter | 50 kHz high-pass |
Outputs
| Parameter | Value |
|---|---|
| Probe Adjust Output Frequency | ~1.2 kHz |
| Probe Adjust Output Voltage | ~5 V |
Measurements
| Parameter | Value |
|---|---|
| Cursor Measurements | V1, V2, ΔV, T1, T2, ΔT, 1/ΔT |
Options & Accessories
| Parameter | Value |
|---|---|
| Compatible Expansion Modules | HP 54650A (HP-IB), HP 54652A (RS-232), HP 54657A (Measurement/Storage), HP 54655A (Test Assistant) |
Auxiliary Inputs
| Parameter | Value |
|---|---|
| Z-Axis Input Impedance | 10 kΩ |
| Z-Axis Input Level | TTL compatible (active low blanks display) |
X-Y Mode
| Parameter | Value |
|---|---|
| X-Y Mode Bandwidth | X-axis: DC to 1.8 MHz, Y-axis: DC to 150 MHz |
| X-Y Phase Difference | ±3° at 100 kHz |
Vertical System
| Parameter | Value |
|---|---|
| Vertical Offset Range (Channels 1 & 2) | ±2 V (2 mV/div to 200 mV/div), ±40 V (500 mV/div to 5 V/div) |
| Channel-to-Channel Isolation | ≥ 40 dB at 100 MHz |
Maintenance
| Parameter | Value |
|---|---|
| Recommended Calibration Interval | 1 year |
Technology
Digital Storage Oscilloscope (DSO)
Applications
Electronic testing, laboratory measurement, and academic education