SpecAtlasHub

54622D

Keysight Technologies (Agilent HP)Mixed Signal

The Keysight (Agilent) 54622D is a 2+16 channel, 100 MHz Mixed-Signal Oscilloscope (MSO) that combines the detailed signal analysis of an oscilloscope with the multi-channel timing measurements of a logic analyzer. Featuring 4 MB of patented MegaZoom deep memory and a high-definition display with 32 levels of intensity, it is designed for debugging MCU, CPLD, and serial bus systems like I2C, SPI, LIN, CAN, and USB.

Embedded SystemsLogic AnalysisSerial Data Analysis

Specifications

General

ParameterValue
InterfacesRS-232 (Standard), Parallel Printer Port (Standard), Floppy Drive (Standard); GPIB, USB, LAN (via optional modules)

Physical

ParameterValue
Power Supply100-240 VAC, 50/60 Hz / 100-120 VAC, 400 Hz; 110 VA maximum
Operating Temperature0 °C to +55 °C
Dimensions (W×H×D)322 mm × 172 mm × 317 mm
Weight6.2

System Overview

ParameterValue
Analog Bandwidth100 MHz
Number of Analog Channels2
Number of Digital Channels16
Maximum Analog Sample Rate200 MSa/s
Maximum Digital Sample Rate400 MSa/s
Maximum Memory Depth (Analog)4 MB (single-channel), 2 MB (dual-channel)
Maximum Memory Depth (Digital)8 MB (8-channels active), 4 MB (16-channels active)
Waveform Update Rate25 million vectors/second

Vertical System - Analog Channels

ParameterValue
Hardware Bandwidth Limits20 MHz (selectable)
Input CouplingAC, DC, GND
Input Impedance1 MΩ || 13 pF
Input Sensitivity Range2 mV/div to 5 V/div
Vertical Resolution8 bits
DC Gain Accuracy±2.0% of full scale
Maximum Input Voltage400 V (DC + Peak AC)
Analog Channel Rise Time (Calculated)3.5 ns
Analog Channel Offset Range (2 mV/div to 200 mV/div)±2 V
Analog Channel Offset Range (>200 mV/div to 5 V/div)±40 V
Analog Channel Dynamic Range±8 divisions from screen center

Vertical System - Digital Channels

ParameterValue
Input Channels16 channels (D0 - D15) in two 8-channel pods
Input Threshold SelectionsTTL, CMOS, ECL, User-Defined
User-Defined Threshold Range±6.0 V in 10 mV increments
Threshold Accuracy±(100 mV + 3% of threshold setting)
Input Dynamic Range±10 V about threshold
Minimum Input Voltage Swing500 mV peak-to-peak
Input Impedance (Digital Probe)100 kΩ || 8 pF
Channel-to-Channel Skew2 ns typical
Digital Channel Maximum Toggle Rate150 MHz
Digital Channel Minimum Detectable Pulse Width5 ns
Digital Channel-to-Channel Skew2 ns typical, 3 ns maximum

Horizontal System

ParameterValue
Timebase Range5 ns/div to 50 s/div
Timebase Accuracy±0.007% (70 ppm)
Horizontal ModesMain, Delayed, Roll, XY

Acquisition System

ParameterValue
Acquisition ModesNormal, Peak Detect, Averaging
Peak Detect Resolution5 ns
Averaging Factors2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384

Trigger System

ParameterValue
Trigger SourcesChannel 1, Channel 2, Digital D0-D15, Line, External
Trigger ModesAuto, Normal, Single
Trigger CouplingAC, DC, LF Reject, HF Reject, Noise Reject
Trigger Holdoff Range60 ns to 10 s
Edge TriggeringRising, Falling, Alternating
Pulse Width TriggeringTrigger on positive or negative pulses from 5 ns to 10 s
Pattern/State TriggeringTrigger on multi-channel logic pattern or state
Serial Protocol TriggeringI²C, SPI, LIN, CAN, USB (Start of Packet)
External Trigger Input Impedance1 MΩ || 13 pF
External Trigger Max Input Voltage400 V (DC + Peak AC)
Trigger Sensitivity (DC to 25 MHz)0.35 div or 3.5 mV
Trigger Sensitivity (25 MHz to 100 MHz)1 div or 10 mV
External Trigger Sensitivity (DC to 25 MHz)50 mV
External Trigger Sensitivity (25 MHz to 100 MHz)150 mV
External Trigger Range±10 V

Waveform Measurements & Analysis

ParameterValue
Automatic Voltage MeasurementsVp-p, Vmax, Vmin, Vtop, Vbase, Vamp, Vavg, Vrms
Automatic Time MeasurementsFrequency, Period, Rise Time, Fall Time, +Width, -Width, Duty Cycle
Cursor MeasurementsManual, Track, Auto
Waveform Math OperationsAddition, Subtraction, Multiplication, FFT
FFT Window FunctionsHanning, Flat Top, Rectangular

Display & User Interface

ParameterValue
Display Type7-inch monochrome raster CRT with 32 levels of gray-scale
Display Resolution500 × 240 pixels
Local Language SupportQuick Help in 11 languages

Connectivity & Interfaces

ParameterValue
RS-232 InterfaceStandard, DB-9 male, up to 115.2 kbps
Parallel Printer PortStandard, 25-pin D-sub female
Floppy DriveStandard 3.5-inch 1.44 MB
Auxiliary OutputTrigger Out (BNC)

Power Requirements

ParameterValue
Line Voltage Range100 to 240 VAC (nominal)
Line Frequency Range50 Hz to 60 Hz, or 400 Hz (at 100-120 VAC)
Power Consumption110 VA max

Environmental & Safety Compliance

ParameterValue
Storage Temperature Range-40 °C to +70 °C
Operating AltitudeUp to 4,600 m (15,000 ft)

Ordering & Configuration

ParameterValue
Standard Probes Included (Analog)2 x 10074C 10:1 passive probes (1.5 m, 150 MHz)
Standard Probes Included (Digital)16-channel digital probe kit (54620-68701) with grabbers and lead set

Triggering

ParameterValue
Minimum Glitch Pulse Width5 ns
Video Triggering FormatsNTSC, PAL, SECAM, PAL-M
High-Frequency Reject FilterSelectable, ~50 kHz cutoff
Low-Frequency Reject FilterSelectable, ~50 kHz cutoff

Digital Channels

ParameterValue
Digital Probe Input Capacitance8 pF
Digital Probe Maximum Input Voltage±40 V peak

Storage

ParameterValue
Internal Setup/Waveform Storage3 setups, 4 waveforms
Real-time ClockYes, battery-backed (for file timestamps)

Serial Triggering

ParameterValue
I2C Triggering ModesStart, Stop, Missing Ack, Address, Data, Restart
SPI Triggering ModesData (MISO/MOSI), Clock, Chip Select
CAN Triggering ModesStart of Frame, Frame Type, Identifier, Data, Missing Ack

Display

ParameterValue
Display Size7-inch diagonal CRT

Connectivity

ParameterValue
Optional Interface ModulesN2757A (GPIB), N2758A (USB)

Environmental & Safety

ParameterValue
Operating Humidity95% RH at 40 °C

General Specifications

ParameterValue
Calibration Interval1 year

Technology

Mixed Signal Oscilloscope

Applications

MCU and CPLD debugging, serial bus analysis (I2C, SPI, CAN, LIN, USB), mixed-signal circuit troubleshooting