SpecAtlasHub

54810A

Keysight Technologies (Agilent HP)Digital

The Keysight (Agilent/HP) Infiniium 54810A is a member of the 54800 Series of digital storage oscilloscopes. Providing 2 channels with a 500 MHz analog bandwidth and a real-time sample rate of 1 GSa/s simultaneously across both channels, it combines high-fidelity acquisition with a familiar Windows-based graphic user interface to streamline debugging and troubleshooting in high-speed digital and general-purpose electronics design.

Serial Data AnalysisSignal AnalysisSignal Integrity

Specifications

General

ParameterValue
InterfacesGPIB (IEEE-488.2), LAN (10Base-T RJ-45), RS-232, Parallel (Centronics), VGA out, PS/2 Keyboard, PS/2 Mouse
Display8.4-inch active-matrix color TFT LCD, 640 × 480 resolution

Physical

ParameterValue
Power Supply100–240 VAC (±10%), 47–440 Hz, 390 VA maximum
Operating Temperature5 °C to +40 °C
Dimensions (W×H×D)437 mm × 216 mm × 440 mm
Weight11.8 kg

Vertical System

ParameterValue
Analog Channels2
Analog Bandwidth500 MHz
Hardware Rise Time< 700 ps
Vertical Resolution8 bits (≥ 12 bits with averaging)
Input Impedance1 MΩ ±1% (~13 pF)
Input CouplingAC, DC
Maximum Input Voltage (1 MΩ)150 Vrms (DC + peak AC < 10 kHz)
Vertical Sensitivity Range2 mV/div to 10 V/div
DC Vertical Gain Accuracy±1.25% of full scale
Offset Range±2 V (2 mV to 100 mV/div), ±20 V (102 mV to 1 V/div), ±200 V (1.02 V to 10 V/div)
Channel-to-Channel Isolation≥ 40 dB (DC to 500 MHz)
Bandwidth Limit20 MHz (selectable)
Maximum Offset Range (2 mV to 100 mV/div)±2 V
Maximum Offset Range (102 mV to 1 V/div)±20 V
Maximum Offset Range (1.02 V to 10 V/div)±200 V

Horizontal System & Sampling Rate

ParameterValue
Maximum Real-Time Sample Rate1 GSa/s (on both channels simultaneously)
Equivalent-Time Sample Rate25 GSa/s max
Maximum Memory Depth32 kpts per channel
Timebase Range500 ps/div to 20 s/div
Timebase Accuracy±15 ppm (0.0015%)
Channel-to-Channel Deskew Range±100 ns

Trigger System

ParameterValue
Trigger SourcesChannel 1, Channel 2, Auxiliary, Line
Trigger ModesAuto, Triggered, Single
Trigger CouplingDC, AC, Low Frequency Reject, High Frequency Reject, Noise Reject
Trigger Sensitivity (Internal)0.3 div or 5 mV (DC to 500 MHz)
Trigger Sensitivity (Auxiliary)100 mV (DC to 500 MHz)
Trigger Level Range (Internal)±8 divisions from center screen
Trigger Level Range (Auxiliary)±2.0 V or ±10.0 V (range dependent)
Trigger Holdoff RangeIndividual control from 80 ns to 320 ms
Edge TriggeringRising, falling, or alternating edges on any source
Glitch TriggeringTriggers on positive or negative glitches < 2.5 ns to 10 s
Pattern TriggeringTriggers on logical AND, NAND, OR, or NOR pattern of channel inputs
State TriggeringTriggers on a pattern of logic levels of channels 1, 2, and auxiliary trigger entered on a transition of channel 4 (or clock channel)

Acquisition Modes

ParameterValue
Real-Time Sampling ModeCaptures single-shot waveforms up to 1 GSa/s
Peak Detect ModeDetects glitches down to 10 ns wide at all sample rates
Averaging ModeSelectable from 2 to 4096 averages
High-Resolution ModeBoxcar filtering reduces noise and increases vertical resolution up to 12 bits

Measurements, Math & Analysis

ParameterValue
Automatic Voltage MeasurementsPeak-to-Peak, Maximum, Minimum, Amplitude, Top, Base, Overshoot, Preshoot, Average, RMS, Cycle Mean, Cycle RMS
Automatic Time & Frequency MeasurementsPeriod, Frequency, Positive Width, Negative Width, Duty Cycle, Rise Time, Fall Time, Tmin, Tmax, Delay, Phase
Waveform Math OperatorsAdd, Subtract, Multiply, Integrate, Differentiate, FFT
FFT Window FunctionsHanning, Flattop, Rectangular

Display & User Interface

ParameterValue
Operating SystemWindows-based (Windows 95 / 98 / XP depending on revision)
Built-in Storage Drive Type3.5-inch 1.44 MB floppy drive and internal hard disk drive

Connectivity & External Interfaces

ParameterValue
External Trigger InputBNC connector on front panel
Auxiliary OutputBNC connector on rear panel

Power & Environmental

ParameterValue
Storage Temperature-40 °C to +70 °C
Operating HumidityUp to 95% relative humidity (non-condensing) at +40 °C
Operating AltitudeUp to 4,600 meters (15,000 feet)
AC Input Voltage100 to 240 VAC (±10%)
AC Input Frequency47 to 440 Hz
Maximum Power Consumption390 W
Non-Operating Temperature Range-40 °C to +70 °C
Non-Operating Altitude RangeUp to 15,300 m (50,000 ft)
Operating Vibration0.21 g rms (5 to 500 Hz)
Non-Operating Vibration2.09 g rms (5 to 500 Hz)
Shock Resistance30 g (half-sine, 11 ms duration)

Physical Specifications

ParameterValue
Height216 mm (8.5 inches)
Width437 mm (17.2 inches)
Depth440 mm (17.3 inches)
Form FactorBenchtop (rackmountable with optional kit)

Horizontal System

ParameterValue
Pre-trigger Delay Range0 to 100% of capture memory
Post-trigger Delay Range0 to 1,000,000 divisions

Triggering

ParameterValue
Auxiliary Trigger Input Impedance1 MΩ ± 3% || 13 pF ± 2 pF
Auxiliary Trigger Maximum Input Voltage±100 V (DC + peak AC < 10 kHz)

Ports & Connectivity

ParameterValue
GPIB PortIEEE-488, fully programmable
Parallel Port25-pin Centronics
Serial Port9-pin RS-232
Keyboard PortPS/2
Mouse PortPS/2
External Video Port15-pin VGA
Network InterfaceRJ-45 (10Base-T Ethernet)

Computer System

ParameterValue
Floppy Disk Drive3.5-inch 1.44 MB

Accessories

ParameterValue
Standard Probes IncludedTwo 1160A 10:1 passive probes

Inputs & Outputs

ParameterValue
Probe InterfaceHP AutoProbe interface

Compliance

ParameterValue
Safety StandardsCSA C22.2 No. 1010.1, EN 61010-1, UL 3111-1
EMC StandardsCISPR 11/EN 55011 (Group 1, Class A), IEC 1000-3-2, IEC 1000-3-3, IEC 1000-4-2, IEC 1000-4-3, IEC 1000-4-4

Environmental

ParameterValue
Acoustic Noise< 45 dBA

Options

ParameterValue
Memory Upgrade OptionOption 001 (extends memory to 64 Kpts per channel)

Acquisition

ParameterValue
Waveform InterpolationSin(x)/x, Linear
Minimum Glitch Width Detected1.0 ns

Trigger

ParameterValue
Trigger Jitter10 ps RMS

Technology

Digital Storage Oscilloscope

Applications

General purpose electronic design, troubleshooting, and serial bus verification