The Keysight Infiniium 54831B is a 4-channel, 600 MHz digital oscilloscope from the 54800 Series. Combining a classic, analog-like front panel with the flexibility of a Windows-based user interface, this scope delivers up to 4 GSa/s real-time sample rates and versatile memory configuration options up to 16 Mpts.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | LAN, GPIB, USB, RS-232, Parallel, PS/2, VGA out |
| Display | 8.4-inch color TFT-LCD, 640 × 480 resolution |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 100-240 VAC (±10%), 47-440 Hz, Max 390 W |
| Operating Temperature | 5 °C to +40 °C |
| Dimensions (W×H×D) | 437 mm × 216 mm × 440 mm |
| Weight | 13.4 |
Vertical System - Analog Channels
| Parameter | Value |
|---|---|
| Analog Bandwidth (-3 dB) | 600 MHz |
| Number of Input Channels | 4 analog channels |
| Calculated Rise Time (10% to 90%) | < 583 ps |
| Input Impedance | 1 MΩ ± 1% (13 pF) or 50 Ω ± 1% |
| Input Coupling | DC, AC, Ground (1 MΩ only); DC (50 Ω) |
| Vertical Resolution | 8 bits (up to 12 bits with averaging) |
| Input Sensitivity Range | 2 mV/div to 10 V/div (1 MΩ), 2 mV/div to 1 V/div (50 Ω) |
| Maximum Input Voltage (1 MΩ) | 150 V CAT II, 400 V (DC + peak AC) |
| Maximum Input Voltage (50 Ω) | 5 Vrms |
| Hardware Bandwidth Limits | 20 MHz |
Horizontal System
| Parameter | Value |
|---|---|
| Timebase Range | 100 ps/div to 20 s/div |
| Timebase Accuracy | ±15 ppm (0.0015%) |
| Maximum Equivalent Time Sample Rate | 250 GS/s |
| Post-Trigger Delay Range | 0 to 1,000 s |
Acquisition System
| Parameter | Value |
|---|---|
| Maximum Real-Time Sample Rate (2 Channels) | 4 GSa/s |
| Maximum Real-Time Sample Rate (4 Channels) | 2 GSa/s |
| Optional Memory Depth | Up to 128 Mpts (64 Mpts per channel) |
| Acquisition Modes | Sample, Peak Detect, Averaging, High Resolution |
Trigger System
| Parameter | Value |
|---|---|
| Trigger Sources | Channel 1, 2, 3, 4, Auxiliary, Line |
| Trigger Modes | Auto, Triggered, Single |
| Trigger Coupling | DC, AC, LF Reject, HF Reject, Noise Reject |
| Standard Trigger Types | Edge, Glitch, Pattern, State, Setup and Hold, Transition, Delay, Timeout, Runt, Video |
| Trigger Holdoff Range | 100 ns to 10 s |
| Trigger Sensitivity | 0.5 div (DC to 600 MHz) |
| Minimum Glitch Trigger Width | 1.5 ns |
| Trigger Jitter (Typical) | 8 ps RMS |
| Internal Trigger Level Range | ±8 divisions from screen center |
| Video Triggering Formats | NTSC, PAL, SECAM, HDTV |
Waveform Measurements and Analysis
| Parameter | Value |
|---|---|
| Automatic Measurements | Voltage (peak-to-peak, max, min, average, Vtop, Vbase, amplitude, RMS, overshoot, preshoot); Time (period, frequency, positive width, negative width, duty cycle, rise time, fall time, delay, phase) |
| Waveform Math Operators | Add, Subtract, Multiply, Divide, Integrate, Differentiate, FFT |
| FFT Window Types | Hanning, Hamming, Flat Top, Rectangular, Blackman-Harris |
Display and User Interface
| Parameter | Value |
|---|---|
| Operating System | Windows-based user interface |
Environmental and Compliance
| Parameter | Value |
|---|---|
| Storage Temperature Range | -40 °C to +70 °C |
| Operating Humidity | Up to 95% relative humidity at +40 °C |
| Operating Altitude | Up to 4,600 m (15,000 ft) |
Vertical System
| Parameter | Value |
|---|---|
| DC Gain Accuracy | ±1.25% of full scale |
| Channel-to-Channel Isolation | 40 dB from DC to 600 MHz |
| Probe Interface | Agilent AutoProbe |
| Analog Bandwidth (50 Ω) | 600 MHz |
| Analog Bandwidth (1 MΩ) | 500 MHz |
| Vertical Offset Range (1 MΩ) | ±1.2 V (1 to 50 mV/div), ±2.5 V (50.5 to 99.5 mV/div), ±10 V (100 to 500 mV/div), ±24 V (505 mV to 1 V/div), ±100 V (1.005 to 5 V/div) |
| Vertical Offset Range (50 Ω) | ±1.2 V (1 to 50 mV/div), ±2.5 V (50.5 to 99.5 mV/div), ±10 V (100 to 500 mV/div), ±12 V (505 mV to 1 V/div) |
Auxiliary Inputs & Outputs
| Parameter | Value |
|---|---|
| External Trigger Input Impedance | N/A (the 54831B is a 4-channel model and does not have an external trigger input) |
| Calibration Output | 1 kHz square wave, ~500 mV into 50 Ω, ~1 V into 1 MΩ |
| Auxiliary Output | Trigger output, source clock, or calibrator |
Environmental & Safety
| Parameter | Value |
|---|---|
| Vibration (Operating) | 0.3 g (rms), 5 Hz to 500 Hz |
| Vibration (Non-operating) | 2.4 g (rms), 5 Hz to 500 Hz |
| Shock (Operating) | 15 g, 11 ms half-sine |
| Shock (Non-operating) | 50 g, 11 ms half-sine |
Rear Panel Connections
| Parameter | Value |
|---|---|
| Video Output Port | 15-pin D-sub SVGA |
| Keyboard Port | PS/2 |
| Mouse Port | PS/2 |
| Parallel Port | 25-pin D-sub (Centronics) |
| Serial Port | 9-pin D-sub RS-232 |
Accessories
| Parameter | Value |
|---|---|
| Standard Probes | Four 1165A 10:1 passive probes (10 MΩ, 12 pF) |
Technology
Digital Phosphor Oscilloscope (DPO) / Digital Storage Oscilloscope (DSO)
Applications
High-speed digital design, validation, debugging, and general-purpose electronics testing