The Keysight (Agilent HP) 85033D is a precision 3.5 mm mechanical calibration kit designed for calibrating network analyzers from DC up to 6 GHz. It contains high-accuracy fixed loads, open circuits, and short circuits in both male and female genders, supporting measurements of devices with 3.5 mm and SMA connectors.
Specifications
Physical
| Parameter | Value |
|---|---|
| Operating Temperature | 15 °C to 35 °C |
General Specifications
| Parameter | Value |
|---|---|
| Frequency Range | DC to 6 GHz |
| Nominal Impedance | 50 Ω |
| Connector Type | 3.5 mm |
| Compatible Connector Type | SMA |
| Compatible Vector Network Analyzers | Agilent/Keysight network analyzers up to 6 GHz |
Kit Standards & Contents
| Parameter | Value |
|---|---|
| Male Open Standard | Included |
| Female Open Standard | Included |
| Male Short Standard | Included |
| Female Short Standard | Included |
| Male Fixed Load Standard | Included |
| Female Fixed Load Standard | Included |
Accessories & Ordering Information
| Parameter | Value |
|---|---|
| Option 100 Description | Adds phase-matched 7 mm to 3.5 mm adapters (male and female) for use with 7 mm test port cables |
| Option 200 Description | Adds four Type-N to 3.5 mm adapters |
Standard-Specific Electrical Characteristics
| Parameter | Value |
|---|---|
| Broadband Fixed Load Return Loss | ≥ 46 dB, ≥ 44 dB, or ≥ 38 dB (frequency dependent) |
Environmental & Calibration Standards
| Parameter | Value |
|---|---|
| Calibration Reference Temperature Range | 20 °C to 26 °C |
| Storage Temperature Range | -40 °C to 75 °C |
Standard Definitions
| Parameter | Value |
|---|---|
| Male Open Offset Delay | 29.243 ps |
| Female Open Offset Delay | 29.243 ps |
| Male Short Offset Delay | 31.785 ps |
| Female Short Offset Delay | 31.785 ps |
| Standard Offset Impedance | 50 Ω |
Environmental
| Parameter | Value |
|---|---|
| Operating Altitude | < 4,500 m |
| Non-Operating Altitude | < 15,240 m |
| Relative Humidity | Up to 95% @ 40 °C (non-condensing) |
Performance
| Parameter | Value |
|---|---|
| Fixed Load SWR (DC to 2 GHz) | ≤ 1.011 |
| Fixed Load SWR (2 to 6 GHz) | ≤ 1.025 |
| Fixed Load SWR (6 to 9 GHz) | ≤ 1.040 |
| Fixed Load Return Loss (DC to 2 GHz) | ≥ 46 dB |
| Fixed Load Return Loss (2 to 6 GHz) | ≥ 38 dB |
| Fixed Load Return Loss (6 to 9 GHz) | ≥ 34 dB |
Technology
Coaxial Calibration Standard
Applications
RF & Microwave Vector Network Analyzer Calibration