The Keysight (Agilent) 89605B is an RF Input Module designed for VXI-based test systems, primarily serving as the RF downconverter front-end for the Agilent 89600 Vector Signal Analyzer (VSA) series. It covers a frequency range from 100 kHz up to 2.6 GHz and downconverts RF signals to an intermediate frequency (IF) for digitizing by subsequent VXI ADC modules.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | VXI backplane, RF Input, IF Output |
Physical
| Parameter | Value |
|---|---|
| Dimensions (W×H×D) | 30.5 mm × 262 mm × 353 mm (C-size, 1-slot) |
System & Chassis Architecture
| Parameter | Value |
|---|---|
| Form Factor | VXI C-size |
| Chassis Slot Width Requirements | 1 slot |
| Backplane Bus Type | VXI |
RF, Electrical & Calibration Performance
| Parameter | Value |
|---|---|
| Frequency Range | 100 kHz to 2.6 GHz |
| Nominal Impedance | 50 Ω |
| RF Input Connector Type | Type-N (female) |
Timing & Synchronization
| Parameter | Value |
|---|---|
| Reference Clock Compatibility | VXI backplane CLK10 (10 MHz) |
VXI Interface
| Parameter | Value |
|---|---|
| VXI Size Class | C-size |
| VXI Device Type | Register-based |
Performance
| Parameter | Value |
|---|---|
| Analysis Bandwidth | 36 MHz |
RF Input
| Parameter | Value |
|---|---|
| Maximum Safe RF Input Power | +30 dBm |
| Tuning Resolution | 1 Hz |
| Input VSWR | < 1.35:1 (< 1.5 GHz), < 1.6:1 (1.5 to 2.6 GHz) |
| Input Amplitude Range | -50 to +30 dBm in 2 dB steps |
Inputs & Outputs
| Parameter | Value |
|---|---|
| 10 MHz Reference Input | SMB |
| 10 MHz Reference Output | SMB |
| IF Output Frequency | 70 MHz |
Technology
RF Downconversion
Applications
RF vector signal analysis and downconversion within VXI systems