The Keysight Infiniium DSA90604A is a high-performance 6 GHz digital signal analyzer oscilloscope belonging to the DSA90000A Series. It integrates superior analog performance, deep analysis software, and a powerful hardware-software triggering system designed to provide deep insight and superior signal integrity for high-speed digital designs.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | LAN (10/100/1000Base-T), GPIB (IEEE-488.2), 6 × USB 2.0 Host (2 front, 4 rear), 1 × USB 2.0 Device, Dual-Link DVI, VGA, Auxiliary Output, Reference Clock Input/Output |
| Display | 12.1-inch color XGA TFT-LCD touchscreen (1024 × 768 resolution) |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 100 - 240 VAC (±10%) at 50/60 Hz, max 800 W |
| Operating Temperature | 5 °C to +40 °C |
| Dimensions (W×H×D) | 434 mm × 283 mm × 505 mm |
| Weight | 20.4 kg |
Vertical System
| Parameter | Value |
|---|---|
| Analog Bandwidth | 6 GHz |
| Analog Rise Time (10% to 90%) | 75 ps |
| Analog Rise Time (20% to 80%) | 53 ps |
| Input Channels | 4 analog channels |
| Input Impedance | 50 Ω (±1.5%) |
| Input Coupling | DC |
| Input Sensitivity Range | 1 mV/div to 1 V/div |
| DC Gain Accuracy | ±2% of full scale |
| Maximum Input Voltage | ± 5 V |
| Channel-to-Channel Isolation | 40 dB (DC to 1 GHz), 30 dB (1 GHz to 6 GHz) |
| Noise Floor (at 5 mV/div) | 234 μVrms |
| Offset Range | ±0.4 V (1 to 100 mV/div), ±4 V (101 mV to 1 V/div) |
| Offset Accuracy | ±(1.5% of channel offset setting + 1.0% of full scale + 1 mV) |
| Input VSWR | < 1.25:1 (DC to 4 GHz), < 1.5:1 (4 to 6 GHz) |
| Probe Interface | AutoProbe |
Horizontal System
| Parameter | Value |
|---|---|
| Main Timebase Range | 5 ps/div to 20 s/div |
| Timebase Accuracy | ±0.1 ppm (initial), ±0.1 ppm/year (aging) |
Acquisition System
| Parameter | Value |
|---|---|
| Maximum Real-Time Sample Rate | 40 GSa/s (2 channels), 20 GSa/s (4 channels) |
| Maximum Memory Depth (Standard) | 50 Mpts per channel (4 channels), 100 Mpts (2 channels) |
| Maximum Memory Depth (Optional) | 500 Mpts per channel (4 channels), 1 Gpts (2 channels) |
| Acquisition Modes | Real-time, Equivalent-time, Segmented, Average |
Trigger System
| Parameter | Value |
|---|---|
| Trigger Sources | Channel 1, Channel 2, Channel 3, Channel 4, Auxiliary |
| Trigger Modes | Edge, Glitch, Width, Transition, Runt, Timeout, Window, Pattern, State, Setup/Hold, Sequence |
| Trigger Sequencing | 2-level trigger sequencing |
| Internal Trigger Level Range | ±4 divisions from center of screen |
Waveform Measurements and Analysis
| Parameter | Value |
|---|---|
| Waveform Math Operators | Add, Subtract, Multiply, Divide, FFT, Differentiate, Integrate, Square, Square Root, Log, Ln, Absolute Value |
| FFT Window Types | Hanning, Flat Top, Rectangular, Blackman-Harris, Hamming |
| Standard Analysis Software Bundle | Serial Data Analysis (SDA), EZJIT+ (Jitter and RJ/DJ Separation), InfiniiScan, Bandwidth/Noise Reduction |
Computer System Specs
| Parameter | Value |
|---|---|
| Operating System | Windows Embedded Standard 7 |
| Storage Drive | 250 GB (or larger) removable high-speed SATA hard drive |
Power and Environmental
| Parameter | Value |
|---|---|
| Non-Operating Temperature Range | -40 °C to +70 °C |
| Operating Humidity | Up to 95% relative humidity (non-condensing) at +40 °C |
| Operating Altitude | Up to 4,600 m (15,000 ft) |
Compliance and Standards
| Parameter | Value |
|---|---|
| Recommended Calibration Cycle | 1 year |
| LXI Compliance | LXI Class C compliant |
Display
| Parameter | Value |
|---|---|
| Display Resolution | 1024 × 768 pixels |
Processor & Storage
| Parameter | Value |
|---|---|
| CPU | Intel Core 2 Duo 3.0 GHz |
| System Memory | 4 GB DDR2 |
Power
| Parameter | Value |
|---|---|
| Power Consumption | 800 W maximum (800 VA) |
| Line Voltage & Frequency | 100-240 VAC (50/60 Hz), 100-120 VAC (400 Hz) |
Environmental
| Parameter | Value |
|---|---|
| Operating Vibration | 0.21 g rms, 5 Hz to 500 Hz |
| Non-operating Vibration | 2.09 g rms, 5 Hz to 500 Hz |
Compliance
| Parameter | Value |
|---|---|
| Safety Standards | IEC 61010-1:2001, EN 61010-1:2001, UL 61010-1:2004, CAN/CSA-C22.2 No. 61010-1:2004 |
| EMC Standards | IEC 61326-1:2005, EN 61326-1:2006, CISPR 11:2003 Class A |
Interfaces
| Parameter | Value |
|---|---|
| USB Ports | 6 x USB 2.0 host (2 front, 4 rear), 1 x USB 2.0 device (rear) |
| LAN Interface | 10/100/1000 Base-T RJ-45 |
| GPIB Interface | IEEE-488.2 interface |
| Video Outputs | 1 x 15-pin VGA, 1 x DVI-D |
| Audio Ports | Mic-in, Line-in, Line-out (3.5 mm jack) |
| External Trigger Input | 50 Ohm, BNC, max 5 V rms |
Performance
| Parameter | Value |
|---|---|
| Probing System | Autoprobe II (compatible with InfiniiMax I & II active probes) |
Triggering
| Parameter | Value |
|---|---|
| Hardware Serial Trigger Rate (Optional) | Up to 3.125 Gbps (with Option 011) |
| Hardware Serial Trigger Pattern Length | Up to 40-bit pattern (with Option 011) |
Technology
Digital Phosphor Oscilloscope (DPO) / Digital Signal Analyzer
Applications
High-speed digital debug, compliance testing (DDR, USB 2.0, Serial RapidIO), and jitter/noise analysis.