The Keysight Technologies (formerly Agilent) DSO6014A is a 100 MHz, 4-channel digital storage oscilloscope from the InfiniiVision 6000 Series. Powered by proprietary MegaZoom III technology, it offers an uncompromised waveform update rate of up to 100,000 waveforms/sec and a deep standard memory of 8 Mpts. Equipped with a 6.3-inch color display, advanced triggering options (including analog HDTV, I2C, SPI, CAN, LIN, and USB), and standard connectivity including LAN, USB, GPIB, and XGA video output, the DSO6014A provides outstanding viewing, triggering, and measuring capabilities.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | LAN (10/100Base-T, LXI Class C), USB 2.0 (2x Host, 1x Device), GPIB, XGA Video Output |
| Display | 6.3-inch (160 mm) diagonal color TFT LCD, 640 x 480 VGA resolution, 256 levels of intensity grading |
| Calibration Interval | 1 year |
| Acoustic Noise | 39 dBA at 1 meter |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 100 to 240 VAC (±10%), 50/60 Hz, or 100 to 120 VAC, 400 Hz; 120 W maximum |
| Operating Temperature | 0 to +55 °C |
| Dimensions (W×H×D) | 354 mm x 188 mm x 282 mm |
| Weight | 4.9 kg |
Vertical System
| Parameter | Value |
|---|---|
| Number of Analog Channels | 4 |
| Analog Bandwidth (-3 dB) | 100 MHz |
| Calculated Rise Time (10% to 90%) | 3.5 ns |
| Input Coupling | AC, DC |
| Input Impedance | 1 MΩ ±1% || 14 pF, or 50 Ω ±1.5% |
| Input Sensitivity Range | 2 mV/div to 5 V/div (1 MΩ), 2 mV/div to 1 V/div (50 Ω) |
| Vertical Resolution | 8 bits |
| Maximum Input Voltage | CAT I 300 Vrms, 400 Vpk (1 MΩ); 5 Vrms (50 Ω) |
| DC Gain Accuracy | ±2.0% of full scale |
| DC Offset Accuracy | ±(1.5% of setting + 0.1 div + 2 mV) for 2 mV/div to 200 mV/div; ±(1.5% of setting + 0.1 div + 20 mV) for >200 mV/div to 5 V/div |
| Offset Range | ±2 V (2 mV/div to 100 mV/div), ±50 V (102 mV/div to 5 V/div) at 1 MΩ |
| Channel-to-Channel Isolation | ≥ 40 dB from DC to 100 MHz |
| Hardware Bandwidth Limits | 20 MHz (selectable) |
Horizontal System
| Parameter | Value |
|---|---|
| Timebase Range | 5 ns/div to 50 s/div |
| Timebase Accuracy | ±15 ppm (0.0015%) |
| Horizontal Delay Range | Pre-trigger: Greater of 1 screen width or 2.5 s; Post-trigger: 1 s to 500 s |
| Channel-to-Channel Deskew Range | ±100 ns |
| Horizontal Modes | Main, Zoom, Roll, XY |
Acquisition System
| Parameter | Value |
|---|---|
| Maximum Real-Time Sample Rate (Single Channel) | 2 GSa/s (interleaved), 1 GSa/s (each channel) |
| Maximum Memory Depth (Standard) | 8 Mpts (interleaved), 4 Mpts (each channel) |
| Acquisition Modes | Normal, Peak Detect, Averaging, High Resolution |
| Peak Detect Resolution | 500 ps (interleaved), 1 ns (each channel) |
| Averaging Factors | Selectable from 2 to 16384 |
| High-Resolution Mode Resolution | Up to 12 bits of vertical resolution (at ≥ 10 μs/div) |
| Waveform Update Rate | Up to 100,000 waveforms/sec |
Trigger System
| Parameter | Value |
|---|---|
| Trigger Sources | Channel 1, Channel 2, Channel 3, Channel 4, Line, External |
| Trigger Modes | Auto, Normal, Single |
| Trigger Coupling | AC, DC, LF Reject, HF Reject, Noise Reject |
| Trigger Holdoff Range | 60 ns to 10 s |
| Trigger Sensitivity | < 10 mV/div: greater of 1 div or 5 mV; >= 10 mV/div: 0.6 div |
| Edge Triggering | Rising, Falling, Alternating |
| Pulse Width Triggering | Trigger on pulse width >, <, within, or outside range of 15 ns to 10 s |
| Pattern/State Triggering | Pattern of High, Low, Don't Care on any analog channel |
| Video/TV Triggering | NTSC, PAL, SECAM, HDTV (480p, 576p, 720p, 1080i, 1080p) |
| Runt Triggering | Not supported |
| Setup/Hold Triggering | Not supported |
| Serial Bus Triggering Options | I2C, SPI, CAN, LIN, USB (low/full speed) |
Measurements and Waveform Analysis
| Parameter | Value |
|---|---|
| Automatic Voltage Measurements | Peak-to-Peak, Maximum, Minimum, Amplitude, Top, Base, Overshoot, Preshoot, Average, RMS |
| Automatic Time Measurements | Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle |
| Automatic Mixed/Phase Measurements | Delay, Phase |
| Measurement Statistics | Mean, Min, Max, Standard Deviation, Count |
| Waveform Math Operations | Addition, Subtraction, Multiplication, FFT |
| FFT Window Functions | Hanning, Flat Top, Rectangular |
| FFT Vertical Scale Options | dBV, Vrms |
| Pass/Fail Mask Testing | Supported via optional N5455A software license |
Connectivity and Ports
| Parameter | Value |
|---|---|
| USB Host Ports | 1 port (front), USB 2.0 High-speed |
| USB Device Port | 1 port (rear), USBTMC compliant for PC control |
| LAN Port (LXI Class) | 10/100Base-T LAN, LXI Class C compliant |
| GPIB Interface | IEEE 488.2 interface standard |
| External Trigger Input | BNC on rear panel |
| Trigger Out/Auxiliary Output | BNC on rear panel |
| Calibration Output Signal | Probe compensation: ~3 V into ≥ 100 kΩ, ~1.2 kHz |
| Video Output Port (VGA) | 15-pin D-sub XGA output on rear panel |
Power Specifications
| Parameter | Value |
|---|---|
| Line Voltage Range | 100 V to 240 V AC (±10%) |
| Line Frequency Range | 50/60 Hz (100 to 240 VAC), 400 Hz (100 to 120 VAC) |
| Power Consumption | 120 W maximum |
| Battery Operation Support | Not supported on 4-channel models |
Environmental and Standards
| Parameter | Value |
|---|---|
| Storage Temperature Range | -40 °C to +70 °C |
| Operating Humidity Range | Up to 95% RH (non-condensing) at 40 °C |
| Operating Altitude | Up to 4,600 meters (15,000 feet) |
| Electromagnetic Compatibility (EMC) | IEC 61326-1, EN 61326-1, CISPR 11/EN 55011 Class A |
| Safety Standards | UL61010-1, CAN/CSA-C22.2 No. 61010-1, EN 61010-1 |
Physical Characteristics
| Parameter | Value |
|---|---|
| Kensington Lock Slot | Integrated on rear panel |
Ordering Information and Upgrades
| Parameter | Value |
|---|---|
| Battery Powered BAT Option | Not supported on 4-channel models |
| SEC Secure Environment Mode | Option SEC |
| CAN/LIN Automotive Option | Option AMS (CAN/LIN automotive triggering and decode) |
| I2C and SPI Serial Data Decode | Option LSS (I2C and SPI triggering and decode) |
| FPGA Dynamic Probe Option | Option FPG (for Altera FPGAs) |
Accessories
| Parameter | Value |
|---|---|
| Standard Included Probes | Four 10074D 10:1 passive probes (150 MHz bandwidth) |
Software & Options
| Parameter | Value |
|---|---|
| Option SGM | Segmented memory acquisition |
| Option LMT | Mask limit testing |
| Option 232 | RS-232/UART serial triggering and decode |
| Option SND | I2S serial triggering and decode |
| Option FRS | FlexRay triggering and decode |
| Option 553 | MIL-STD-1553 serial triggering and decode |
Data Storage & Export
| Parameter | Value |
|---|---|
| Waveform Export Formats | CSV, ASCII XY, BIN, PNG, BMP |
Display & Interface
| Parameter | Value |
|---|---|
| Intensity Levels | 256 levels of intensity-graded display |
| Probe Sensing Interface | AutoProbe interface with smart probe support |
| Built-in Help Languages | 11 languages |
Display
| Parameter | Value |
|---|---|
| Display Resolution | 320 x 240 pixels (QVGA) |
| Display Size | 6.3 inches (160 mm) diagonal |
Trigger
| Parameter | Value |
|---|---|
| Trigger Level Range (Internal) | +/-6 divisions from center of screen |
Interfaces
| Parameter | Value |
|---|---|
| USB Port Speed | USB 2.0 High Speed compliant |
| VGA Output Resolution | 640 x 480 pixels (VGA) |
| Web Server Capability | Built-in Virtual Front Panel, Web Monitor, and FTP server |
Inputs & Outputs
| Parameter | Value |
|---|---|
| AutoProbe Interface Support | Yes, compatible with Agilent active probes |
Power
| Parameter | Value |
|---|---|
| Battery Life (Option BAT) | Up to 2 hours of continuous operation |
| Battery Recharge Time (Option BAT) | Approximately 4 hours |
Safety & Compliance
| Parameter | Value |
|---|---|
| Pollution Degree | Pollution Degree 2 |
Environmental
| Parameter | Value |
|---|---|
| Vibration Resistance | MIL-PRF-28800F, Class 3 random vibration |
| Shock Resistance | MIL-PRF-28800F, Class 3 |
Technology
MegaZoom III
Applications
General-purpose electronic design, manufacturing, and educational debugging