The Keysight Agilent E5052A is a high-performance Signal Source Analyzer offering comprehensive phase noise, AM noise, transient, and spectrum measurement capabilities from 10 MHz to 7 GHz. It is widely recognized for its high measurement speed, cross-correlation sensitivity enhancement, and integrated DC bias sources.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | GPIB, LAN (10/100 Base-T), USB 2.0, VGA, Parallel, Serial, PS/2 |
| Display | 10.4-inch color TFT LCD with touch screen, XGA (1024 x 768) |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 90 V to 132 V / 198 V to 264 V AC, 47 Hz to 63 Hz, 300 VA max |
| Operating Temperature | 10 to 40 |
| Dimensions (W×H×D) | 426 mm x 222 mm x 373 mm |
| Weight | 19 |
RF Input Specifications
| Parameter | Value |
|---|---|
| RF Input Frequency Range | 10 MHz to 7 GHz |
| RF Input Power Level Range | -15 dBm to +20 dBm |
| Maximum Input RF Power | +30 dBm (1 W) |
| Input VSWR | < 1.6 (10 MHz to 3 GHz, typical) |
| RF Input Impedance | 50 ohms (nominal) |
| RF Input Connector Type | Type-N (female) |
Phase Noise Measurement
| Parameter | Value |
|---|---|
| Offset Frequency Range | 1 Hz to 100 MHz |
| Measurement Carrier Frequency Range | 10 MHz to 7 GHz |
| Phase Noise Measurement Relative Accuracy | ±1.5 dB |
| Cross-Correlation Technique | Yes |
| Maximum Number of Cross-Correlations | 10,000 |
AM Noise Measurement
| Parameter | Value |
|---|---|
| AM Noise Offset Frequency Range | 10 Hz to 10 MHz |
| AM Noise Carrier Frequency Range | 10 MHz to 7 GHz |
Baseband Noise Measurement
| Parameter | Value |
|---|---|
| Baseband Noise Measurement Range | 1 Hz to 100 MHz |
| Baseband Input Impedance | 50 ohms (nominal) |
| Baseband Input Connector | BNC (female) |
Transient Measurements
| Parameter | Value |
|---|---|
| Wide Band Measurement Span | 50 MHz to 3 GHz |
| Narrow Band Measurement Span | 100 Hz to 25 MHz |
| Transient Time Resolution | 10 ns (maximum resolution in wideband mode) |
| Transient Trigger Sources | RF Level, Frequency, External, Video, GPIB/Manual |
Frequency & Power Measurements
| Parameter | Value |
|---|---|
| Frequency Measurement Range | 10 MHz to 7 GHz |
| RF Power Measurement Range | -15 dBm to +20 dBm |
| RF Power Measurement Resolution | 0.01 dB |
Internal DC Bias Sources
| Parameter | Value |
|---|---|
| DC Tuning Voltage Output Range | -15 V to +35 V |
| DC Tuning Voltage Current Capacity | Max 20 mA |
| DC Tuning Voltage Resolution | 1 mV |
| DC Supply Voltage Output Range | 0 V to +16 V |
| DC Supply Voltage Current Capacity | Max 80 mA |
| DC Supply Voltage Resolution | 1 mV |
| DC Current Measurement Range | 0 to 80 mA |
| DC Current Measurement Accuracy | ±(0.2% of reading + 50 µA) |
Internal Reference Oscillator
| Parameter | Value |
|---|---|
| Reference Frequency | 10 MHz |
| External Reference Input Frequency | 10 MHz ± 10 Hz |
| External Reference Input Level | -3 dBm to +10 dBm |
| Internal Reference Output Level | 0 dBm ± 3 dB |
Spectrum Monitor Mode
| Parameter | Value |
|---|---|
| Frequency Span Range | 15 Hz to 15 MHz |
System Interfaces & Connectivity
| Parameter | Value |
|---|---|
| GPIB Interface Port | 24-pin IEEE-488 |
| LAN Interface Port | RJ-45, 10/100 Base-T |
| USB Interface Ports | USB 2.0 (front and rear panels) |
| External Monitor Output | 15-pin D-Sub (VGA) |
| Reference Input Connector Type | BNC (female), 50 ohms nominal |
| Reference Output Connector Type | BNC (female), 50 ohms nominal |
| Trigger Input Connector Type | BNC (female) |
| DC Control Output Terminals | BNC (female) on front panel (Tuning & Supply) |
| Keyboard and Mouse Interface | PS/2 or USB |
Display & User Interface
| Parameter | Value |
|---|---|
| Display Size and Type | 10.4-inch color TFT LCD |
| Display Resolution | 1024 x 768 (XGA) |
Physical & Power Specifications
| Parameter | Value |
|---|---|
| AC Supply Line Voltage Range | 90 V to 132 V / 198 V to 264 V (autoswitching) |
| AC Supply Line Frequency | 47 Hz to 63 Hz |
| Maximum Power Consumption | 300 VA |
| Operating Temperature Range | 10 °C to 40 °C |
| Storage Temperature Range | -20 °C to +60 °C |
| Operating Humidity Range | 20% to 80% RH (non-condensing) |
| Dimensions (W x H x D) | 426 mm x 222 mm x 373 mm |
Ordering & Configurable Options
| Parameter | Value |
|---|---|
| Frequency Range Expansion | Up to 26.5 GHz with E5053A Microwave Downconverter |
| Millimeter-wave Support | Up to 110 GHz with E5053A and external mixers |
| Rackmount Kit Option | Option 1CP compatible |
RF Input
| Parameter | Value |
|---|---|
| RF Input Attenuator Range | 0 to 35 dB |
| RF Input Attenuator Step Size | 5 dB |
Measurement Capabilities
| Parameter | Value |
|---|---|
| Measurement Modes | Phase Noise, Spectrum Monitor, Frequency/Power/DC Current Transients, Baseband Noise, Frequency/Power/DC Current Sweep |
Reference Frequency
| Parameter | Value |
|---|---|
| High Stability Reference Aging Rate (Option 1D5) | ±5 x 10^-10 per day, ±1 x 10^-7 per year |
| High Stability Reference Temperature Stability (Option 1D5) | ±1 x 10^-8 (0 °C to 40 °C, referenced to 23 °C) |
Compliance
| Parameter | Value |
|---|---|
| Safety Compliance | IEC 61010-1:2001 / EN 61010-1:2001, CAN/CSA C22.2 No. 61010-1-04 |
| EMC Compliance | CISPR 11:1997 / EN 55011:1998 Group 1 Class A, EN 61326:1997 + A1:1998 + A2:2001 |
Rear Panel Connectivity
| Parameter | Value |
|---|---|
| Keyboard Connector | PS/2 (6-pin mini-DIN) |
| Mouse Connector | PS/2 (6-pin mini-DIN) |
| Audio Output Connector Type | 3.5 mm monaural phone jack |
| VGA Monitor Connector Type | 15-pin mini D-sub (female) |
| LAN Interface Connector Type | RJ-45 |
| GPIB Interface Connector Type | 24-pin IEEE-488 |
| Rear Panel Reference Input Impedance | 50 ohms (nominal) |
| Rear Panel Reference Output Impedance | 50 ohms (nominal) |
System Features
| Parameter | Value |
|---|---|
| Measurement Receiver Architecture | Dual-channel cross-correlation with independent internal local oscillators |
General Features
| Parameter | Value |
|---|---|
| Instrument Warm-up Time | 30 minutes |
Technology
Signal Source Analysis / Phase Noise Measurement
Applications
Phase noise measurement, VCO characterization, transient analysis, clock jitter evaluation