The Keysight / Agilent E5061A is a general-purpose RF Vector Network Analyzer from the ENA-L series, operating from 300 kHz to 1.5 GHz. It offers a solid foundation for basic S-parameter measurements with options for either Transmission/Reflection (T/R) or full two-port S-parameter test sets. Designed for manufacturing and R&D applications including CATV component testing, it provides 120 dB of dynamic range, exceptionally low trace noise, built-in VBA programming, and configurable 50 Ω or 75 Ω test port impedances.
Specifications
General
| Parameter | Value |
|---|---|
| Display | 10.4-inch color LCD |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 90 to 132 VAC / 198 to 264 VAC, 47 to 63 Hz, 350 VA max |
| Operating Temperature | 5 to 40 |
| Weight | 13.5 kg |
Frequency Characteristics
| Parameter | Value |
|---|---|
| Frequency Range | 300 kHz to 1.5 GHz |
| Frequency Resolution | 1 Hz |
Test Port Output Characteristics
| Parameter | Value |
|---|---|
| Test Port Impedance | 50 Ω or 75 Ω (option dependent) |
| Test Port Connector Type | Type-N (female) |
Measurement Capabilities
| Parameter | Value |
|---|---|
| Test Set Architecture | Transmission/Reflection (T/R) or full two-port S-parameter (option dependent) |
| Maximum Number of Channels | 4 |
| Maximum Number of Traces per Channel | 4 |
| Automation | Built-in Visual Basic for Applications (VBA) |
| Sweep Types | Linear frequency, log frequency, segment, power |
| Measurement Parameters (T/R Test Set Options) | S11, S21 |
| Measurement Parameters (S-Parameter Test Set Options) | S11, S21, S12, S22 |
| Calibration Types | Response, 1-port, 2-port (S-parameter option dependent), enhanced response |
| Markers | Up to 10 independent markers per trace |
| Electronic Calibration (ECal) | Supported via USB ECal modules |
| Fault Location | Supported via Option 100 (Fault Location and Structural Return Loss) |
Sweep Characteristics
| Parameter | Value |
|---|---|
| Number of Data Points (Minimum) | 2 |
| Number of Data Points (Maximum) | 1601 |
Performance
| Parameter | Value |
|---|---|
| IF Bandwidth | 10 Hz to 30 kHz |
| Output Power Resolution | 0.05 dB |
Test Ports
| Parameter | Value |
|---|---|
| Test Port Damage Level | +20 dBm, ±30 VDC |
Power
| Parameter | Value |
|---|---|
| Maximum Power Consumption | 350 VA |
Environmental
| Parameter | Value |
|---|---|
| Storage Temperature | -10 °C to +60 °C |
| Operating Humidity | 20% to 80% RH (non-condensing) |
Rear Panel Connectors
| Parameter | Value |
|---|---|
| External Reference Input Frequency | 10 MHz |
Technology
RF Vector Network Analysis
Applications
General-purpose RF component test, CATV component manufacturing, education, and basic R&D