The Keysight (Agilent) E5070B is an ENA Series RF Vector Network Analyzer featuring a frequency range of 300 kHz to 3 GHz. It offers high throughput and flexibility with integrated 2-, 3-, or 4-port options, an integrated 10.4-inch touch screen, and built-in Visual Basic for Applications (VBA) for automated testing. This analyzer is optimized for efficient testing of multi-port components, balanced devices, and RF front-end modules.
Specifications
Physical
| Parameter | Value |
|---|---|
| Power Supply | 90 to 132 VAC or 198 to 264 VAC (automatic selection), 47 to 63 Hz, 350 VA max |
Measurement Performance & Core Specs
| Parameter | Value |
|---|---|
| Frequency Range | 300 kHz to 3 GHz |
| Number of Built-in Ports | 2, 3, or 4 (hardware option dependent) |
| Test Port Impedance | 50 Ω |
| Test Port Connector Type | Type-N, female |
| Number of Measurement Channels | Up to 16 channels |
| Number of Traces per Channel | Up to 16 traces per channel |
Source Specifications
| Parameter | Value |
|---|---|
| Frequency Resolution | 1 Hz |
Receiver Specifications
| Parameter | Value |
|---|---|
| IF Bandwidth Range | 10 Hz to 100 kHz |
Measurement Functions & Sweep Capabilities
| Parameter | Value |
|---|---|
| Measurement Parameters | S-parameters, Mixed-mode S-parameters |
| Sweep Types | Linear frequency, Log frequency, Segment, Power |
| Sweep Trigger Modes | Continuous, Single, Number of groups, Hold |
Calibration & Error Correction
| Parameter | Value |
|---|---|
| Calibration Types Supported | Response, Response (open/short/thru), 1-port, 2-port, 3-port, 4-port, TRL/LRM |
| Electronic Calibration (ECal) Support | Yes (2, 3, and 4-port) |
| Fixture Simulator Function | Matching circuit embedding, test fixture de-embedding, impedance conversion |
Connectivity, Control & Interfaces
| Parameter | Value |
|---|---|
| GPIB Interface | 24-pin D-sub female, IEEE 488 compatible |
| LAN Interface | 10/100 Base-T Ethernet, RJ-45 connector |
| External Trigger Input | BNC female |
| Internal Reference Output | 10 MHz, BNC female |
| Handler Port | 36-pin Centronics-type connector |
| VGA Video Output | 15-pin mini D-Sub female |
Hardware & Software Options
| Parameter | Value |
|---|---|
| Time Domain Analysis Option | Option 010 |
| Frequency Offset Mode Option | Option 008 |
| Internal Bias Tees Option | Available on Options 214, 314, and 414 |
General, Environmental & Physical
| Parameter | Value |
|---|---|
| Power Consumption | 350 VA max |
| Programming Environment | Built-in Visual Basic for Applications (VBA) |
| Limit Test Capability | Yes |
| External Trigger Input Level | TTL compatible (0 to 5 V) |
Display
| Parameter | Value |
|---|---|
| Display Size | 10.4 in (264 mm) diagonal |
| Display Type | Active matrix color TFT LCD with touch screen |
Power
| Parameter | Value |
|---|---|
| Power Supply AC Input Voltage | 90 V to 132 V or 198 V to 264 V (automatic selection) |
| Power Supply AC Input Frequency | 47 Hz to 63 Hz |
Rear Panel Connections
| Parameter | Value |
|---|---|
| Rear Panel External Trigger Connector | BNC female |
| Rear Panel Reference Input Connector | BNC female |
| Rear Panel Reference Output Connector | BNC female |
| Rear Panel Video Output Connector | 15-pin mini D-Sub (VGA) |
| Rear Panel GPIB Connector | 24-pin D-sub (IEEE-488) |
| Rear Panel Handler Port Connector | 36-pin Centronics |
Configuration Options
| Parameter | Value |
|---|---|
| Hardware Configurations | 2-port (Option 213/214), 3-port (Option 313/314), or 4-port (Option 413/414) |
Technology
Vector Network Analysis (VNA)
Applications
RF Component and Multiport Device Testing