The Keysight E5383A is a 17-channel single-ended flying lead set designed for logic analyzers with 40-pin cable connectors. It is ideal for probing distributed target points or a small number of lines. The kit includes 20 IC test clips and 5 ground leads, supporting signal acquisition down to 600 mV p-p with a very low 1.5 pF equivalent load capacitance.
Specifications
Physical
| Parameter | Value |
|---|---|
| Operating Temperature | 0 to 55 °C |
Electrical & Signal Acquisition Parameters
| Parameter | Value |
|---|---|
| Number of Channels | 17 (16 single-ended data, 1 single-ended clock) |
| Supported Signal Types | Single-ended |
| Equivalent Load Capacitance | 1.5 pF |
| Input Resistance | 100 kΩ |
| Minimum Voltage Swing | 600 mV p-p |
| Maximum State Speed | Equivalent to the attached logic analyzer data rate |
Physical & Mechanical Specifications
| Parameter | Value |
|---|---|
| Target Pin Compatibility (Square) | 0.63 mm |
| Target Pin Compatibility (Round) | 0.66 mm - 0.84 mm |
System Compatibility
| Parameter | Value |
|---|---|
| Logic Analyzer Connector Type | 90-pin cable connector |
Target Connectivity & Accessories
| Parameter | Value |
|---|---|
| Included IC Test Clips | 20 |
| Included Ground Leads | 5 |
Performance
| Parameter | Value |
|---|---|
| Data Channels | 16 |
| Clock Channels | 1 |
Electrical Characteristics
| Parameter | Value |
|---|---|
| Maximum Input Voltage | ±40 V peak |
| Signal Coupling | DC |
Physical Specifications
| Parameter | Value |
|---|---|
| Lead Length | 31 cm (12 in) |
Compatibility
| Parameter | Value |
|---|---|
| Compatible Analyzer Interface | 90-pin cable connector |
| Supported Analyzers | Keysight / Agilent 16800 and 16900 Series (or any logic analyzer with 90-pin cable connectors) |
Technology
Passive Probing
Applications
Logic Analysis Probing