The Keysight (formerly Agilent) E8364C is a vector network analyzer from the Microwave PNA Series, designed for general-purpose network analysis. It features a frequency range of 10 MHz to 50 GHz, a dynamic range of 104 dB, and high-speed measurements at less than 26 µs/point. The instrument supports highly advanced measurements and calibrations including TRL/LRM, on-wafer, amplifier gain compression, and complex mixer testing, with deep extensibility through a wide range of optional hardware and software configurations.
Specifications
General
| Parameter | Value |
|---|---|
| Mass Storage | Removable hard disk drive |
System Performance
| Parameter | Value |
|---|---|
| Frequency Range | 10 MHz to 50 GHz |
| System Dynamic Range | 104 dB |
| Measurement Speed | < 26 µs / point |
| Measurement Channels | 32 |
| Data Points per Sweep | Up to 20,001 |
Measurement Capabilities
| Parameter | Value |
|---|---|
| Sweep Types | Linear, CW (single frequency), power, segment sweep |
| Display Formats | Log or linear magnitude, SWR, phase, group delay, real and imaginary, Smith chart, polar |
| Markers | 10 independent markers per trace (including reference marker for delta operation) |
| Limit Lines | Definable test limit lines for go/no go testing |
| Calibration Methods | TRL/LRM, on-wafer, in-fixture, waveguide, antenna measurements |
Test Port Input
| Parameter | Value |
|---|---|
| Test Port Connector Type | 2.4 mm (male) |
| Nominal Impedance | 50 Ω |
Options and Configurations
| Parameter | Value |
|---|---|
| Available Hardware Options | Configurable test set, extended power range and bias-tees, IF access |
| Available Software Options | Time-domain, frequency-offset, embedded LO measurements, pulsed-RF, 4-port/N-port, vector/scalar calibrated converter measurements |
Frequency
| Parameter | Value |
|---|---|
| Frequency Resolution | 1 Hz |
| Internal Reference Accuracy | ± 1 ppm (standard) |
Receiver
| Parameter | Value |
|---|---|
| IF Bandwidth Range | 1 Hz to 40 kHz |
Source
| Parameter | Value |
|---|---|
| Output Power Resolution | 0.01 dB |
Architecture
| Parameter | Value |
|---|---|
| Number of Test Ports | 2 |
| Receiver Architecture | 4 receivers |
Compliance
| Parameter | Value |
|---|---|
| LXI Compliance | LXI Class C |
Technology
Vector Network Analysis
Applications
Microwave Component, Amplifier, and Mixer Testing