The Keysight (formerly Agilent) N5224A is a high-performance microwave vector network analyzer from the industry-leading PNA Series. Delivering a frequency range of 10 MHz to 43.5 GHz, it is optimized for passive and active device testing. Available in 2-port or 4-port configurations with up to two built-in sources, the N5224A provides exceptional measurement accuracy, featuring a system dynamic range of 127 dB, a 38 dB power sweep range, and advanced linear receivers.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | LAN, USB, GPIB (IEEE-488) |
| Display | 10.4-inch color LCD touchscreen |
| Warm-up Time | 90 minutes (for full specifications) |
Physical
| Parameter | Value |
|---|---|
| Dimensions (W×H×D) | 426 × 266 × 533 |
General System Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 10 MHz - 43.5 GHz |
| Frequency Resolution | 1 Hz |
| System Impedance | 50 Ω |
| Number of Ports | 2 or 4 (configuration dependent) |
| Test Port Connector Type | 2.4 mm (male) |
| Number of Points per Trace | Up to 100,001 |
Measurement Capabilities & Options
| Parameter | Value |
|---|---|
| Standard Measurements | Full S-parameters (S11, S21, S12, S22, etc.) |
| Electronic Calibration (ECal) Support | Yes |
| Time Domain Analysis Option | Option 010 |
Front Panel Interfaces
| Parameter | Value |
|---|---|
| Display Type | Color LCD Touchscreen |
| Display Size | 10.4 inch |
Software & Processing
| Parameter | Value |
|---|---|
| Internal Operating System | Windows |
| Supported Data Formats | Touchstone (.sNp) |
| Programming Interfaces | SCPI, COM, DCOM |
Test Ports
| Parameter | Value |
|---|---|
| Test Port Damage Level (DC) | 40 VDC |
Inputs & Outputs
| Parameter | Value |
|---|---|
| External Reference Input Frequency | 10 MHz |
| Rear Panel Trigger Inputs/Outputs | BNC (female) |
Sweep & Measurements
| Parameter | Value |
|---|---|
| Sweep Types | Linear frequency, Log frequency, CW time, Power sweep, Segment sweep |
Source
| Parameter | Value |
|---|---|
| Source Power Resolution | 0.01 dB |
Power
| Parameter | Value |
|---|---|
| Maximum Power Consumption | 450 W |
Software & Measurement Options
| Parameter | Value |
|---|---|
| Frequency Offset Option | Option 080 |
| Scalar Mixer/Converter (SMC) Option | Option 082 |
| Vector Mixer/Converter (VMC) Option | Option 083 |
| Gain Compression Application Option | Option 086 |
| Intermodulation Distortion (IMD) Option | Option 087 |
| Source Phase Control Option | Option 088 |
| Spectrum Analysis Option | Option 090 |
| True-Mode Stimulus Option | Option 460 (requires 4-port configuration) |
Hardware Configurations
| Parameter | Value |
|---|---|
| Standard 2-Port Configuration | Option 200 (base) / Option 201 (configurable test set) |
| Advanced 2-Port Configuration | Option 219 (configurable test set, extended power range, bias tees) |
| Standard 4-Port Configuration | Option 400 (base) / Option 401 (configurable test set) |
| Advanced 4-Port Configuration | Option 419 (configurable test set, extended power range, bias tees) |
Compliance
| Parameter | Value |
|---|---|
| EMC Compliance | IEC/EN 61326-1, CISPR 11 |
| Safety Compliance | IEC/EN 61010-1 |
Technology
Vector Network Analysis
Applications
Passive and active device testing, filter and amplifier characterization, frequency converters, millimeter-wave analysis, signal integrity, and materials measurements.