The Keysight (Agilent) N5247A is the 67 GHz model of the PNA‑X vector network analyzer family, integrating dual internal sources, a built‑in combiner, and internal signal‑routing switches. It provides single‑connection linear and nonlinear measurements—including S‑parameters (CW and pulsed), noise figure, gain compression, IMD, harmonics, and converter tests—and supports expansion to a 2‑ or 4‑port single‑sweep mm‑wave solution to 110 GHz with power leveling and true‑differential capability.

Specifications

General

ParameterValue
InterfacesLAN, GPIB, USB

Physical

ParameterValue
Power Supply100–240 Vac, 50/60 Hz (auto‑ranging)

RF and S-Parameter Performance

ParameterValue
Frequency range10 MHz – 67 GHz (model N5247A)
Number of test ports2 or 4 (configuration dependent)
System impedance50 Ω

Source Characteristics

ParameterValue
Source frequency range10 MHz – 67 GHz (per internal source)

Second Source and Frequency Offset

ParameterValue
Frequency-offset modeSupported for converter measurements

Pulsed RF and Time Domain

ParameterValue
Time-domain transformTime-domain analysis (option dependent)

Calibration and Error Correction

ParameterValue
Calibration method: SOLTSupported
Calibration method: TRLSupported
Calibration method: LRM/LRLSupported
Electronic calibration (ECal)Supported
Adapter removal/extensionSupported
Port extensionSupported
Fixture embedding/de-embeddingSupported
System verification/diagnosticsSupported

Test Ports and Test Set

ParameterValue
Port connector type1.85 mm (V) for 67 GHz model
Port locationFront-panel test ports

Triggering and Synchronization

ParameterValue
10 MHz reference inputExternal reference input provided
10 MHz reference outputReference output provided
Trigger sourcesInternal / external / bus

Connectivity and Interfaces

ParameterValue
LAN interfaceRemote control over LAN
GPIB interfaceIEEE‑488 (GPIB) control
USB host portsFront/rear USB host for storage/peripherals
External keyboard/mouseSupported (Windows-based UI)

Software and Control

ParameterValue
Operating systemWindows-based embedded controller
Programming interfaceSCPI command set
Remote interfacesLAN, GPIB
Driver supportVISA / IVI
Embedded appsS‑params, noise figure, gain compression, IMD, pulsed, mixers/converters
Data exportSave measurement data to files/USB storage

System Integration and Extensions

ParameterValue
mmWave single-sweep extensionUp to 110 GHz (with external modules)
mmWave 2-/4-port capability2- or 4-port single-sweep 110 GHz solution
mmWave power levelingSupported with extension solution
mmWave true-differentialDifferential and converter measurements supported

Options and Accessories

ParameterValue
Test port configurationsOrderable as 2-port or 4-port
Noise figure application optionAvailable (license dependent)
Gain compression application optionAvailable (license dependent)
IMD application optionAvailable (license dependent)
Frequency-offset/converter optionAvailable (license dependent)
Time-domain application optionAvailable (license dependent)
ECal modules compatibilityCompatible with Keysight ECal units
Mechanical cal kitsCompatible with Keysight calibration kits
Rack mount kitAvailable accessory

Physical and Power

ParameterValue
AC line input100–240 Vac, 50/60 Hz

Technology

Vector network analyzer with dual internal sources, integrated combiner, and internal switching

Applications

Single‑connection characterization of amplifiers, mixers, and frequency converters: S‑parameters (CW/pulsed), noise figure, gain compression, IMD, harmonics/spectrum, true‑differential, mmWave to 110 GHz, antenna test.