The Keysight N9020A-508 MXA Signal Analyzer is a high-performance midrange instrument designed for rapid, accurate RF signal and spectrum analysis from 10 Hz to 8.4 GHz. Featuring a standard 25 MHz analysis bandwidth, excellent absolute amplitude accuracy, and the open Windows operating system, it offers a versatile and fast test environment for modern wireless and general-purpose RF applications.
Specifications
General
| Parameter | Value |
|---|---|
| Display | 8.4 inch (213 mm) diagonal color LCD, 1024 x 768 XGA resolution with resistive touchscreen |
| Warm-Up Time | 45 minutes |
| EMC Standards | Complies with European EMC Directive 2004/108/EC, IEC/EN 61326-1 |
| Safety Standards | Complies with European Low Voltage Directive 2006/95/EC, IEC/EN 61010-1 |
| Environmental Standard Compliance | MIL-PRF-28800F Class 3 |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 100 to 120 V AC (50/60/400 Hz), 220 to 240 V AC (50/60 Hz) |
| Operating Temperature | 5 to 50 °C |
| Dimensions (W×H×D) | 426 mm × 177 mm × 368 mm |
| Weight | 16 kg |
Frequency and Time Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 10 Hz to 8.4 GHz (Option 508) |
| Frequency Span Range | 0 Hz (zero span), 10 Hz to 8.4 GHz |
| Frequency Reference Aging Rate (Standard) | ±1 x 10^-6 per year |
| Frequency Reference Aging Rate (Option PFR) | ±1 x 10^-7 per year |
| Temperature Stability (Standard) | ±2 x 10^-6 |
| Temperature Stability (Option PFR) | ±1.5 x 10^-8 |
Amplitude Specifications
| Parameter | Value |
|---|---|
| Measurement Range | DANL to +30 dBm |
| Maximum Input Level (RF Power) | +30 dBm (1 W) average power |
| Displayed Average Noise Level (DANL) | -151 dBm/Hz (-154 dBm/Hz typical) |
| Third-Order Intercept (TOI) | +15 dBm (at 1 GHz) |
| Absolute Amplitude Accuracy | ±0.3 dB (at 50 MHz) |
| Attenuator Range | 0 to 70 dB in 2 dB steps |
| Dynamic Range (W-CDMA ACLR) | 73 dB (78 dB typical with noise correction on) |
Bandwidth and Sweep
| Parameter | Value |
|---|---|
| Resolution Bandwidth (RBW) Range | 1 Hz to 8 MHz (in 1, 2, 3, 5 sequence) |
| Video Bandwidth (VBW) Range | 1 Hz to 8 MHz |
| Sweep Time Range (Swept, Span > 0 Hz) | 1 ms to 6000 s |
| Sweep Time Range (Zero Span) | 1 µs to 6000 s |
| Sweep Points Range | 1 to 40,001 |
| Sweep Triggers | Free Run, Line, Video, External 1, External 2, RF Burst |
Analysis and Real-Time Capabilities
| Parameter | Value |
|---|---|
| Standard Analysis Bandwidth | 10 MHz |
| Maximum Analysis Bandwidth (Optional) | 40 MHz / 85 MHz / 125 MHz / 160 MHz (hardware/option dependent) |
Inputs, Outputs, and Connectivity
| Parameter | Value |
|---|---|
| RF Input Connector Type | Type-N female, 50 Ω nominal |
| 10 MHz Reference Input | BNC female, 50 Ω nominal |
| 10 MHz Reference Output | BNC female, 50 Ω nominal |
| Trigger Input | BNC female |
| Trigger Output | BNC female |
| Display Output Port | VGA, 15-pin D-sub |
Control and Software
| Parameter | Value |
|---|---|
| Operating System | Open Windows XP Professional (standard in older units) |
| Supported SCPI Commands | Standard SCPI command set, PSA compatibility mode |
| Optional Demodulation Suites | W-CDMA, HSDPA/HSUPA, Mobile WiMAX, Phase Noise, Noise Figure, Analog Demodulation |
Physical, Environmental, and Power
| Parameter | Value |
|---|---|
| Storage Temperature Range | -40 to +70 °C |
| Nominal Power Consumption | 260 W (typical), 450 W (maximum) |
| Recommended Calibration Cycle | 1 year |
Inputs & Outputs
| Parameter | Value |
|---|---|
| RF Input Impedance | 50 Ω (nominal) |
| Maximum DC Input Voltage (DC Coupled) | ±0.2 V |
| Maximum DC Input Voltage (AC Coupled) | ±100 V |
Performance
| Parameter | Value |
|---|---|
| Mechanical Attenuator Range | 0 to 70 dB in 2 dB steps |
| Electronic Attenuator Range (Option EA3) | 0 to 24 dB in 1 dB steps |
| Preamplifier Frequency Range (Option P08) | 100 kHz to 8.4 GHz |
| Second Harmonic Distortion (SHI) | +45 dBm (at 1 GHz input) |
| Residual Responses | <-100 dBm (nominal, with 0 dB attenuation and RF input terminated) |
Interfaces & Connectivity
| Parameter | Value |
|---|---|
| LAN Interface | 1000Base-T (Gigabit Ethernet), RJ-45 |
| LXI Compliance | LXI Class C |
Environmental
| Parameter | Value |
|---|---|
| Operating Altitude | Up to 4,600 meters (15,000 feet) |
| Operating Humidity | Up to 95% relative humidity at 40 °C (non-condensing) |
Power
| Parameter | Value |
|---|---|
| AC Input Voltage | 100 to 120 V AC (50/60/400 Hz), 220 to 240 V AC (50/60 Hz) |
| Maximum Power Consumption | 450 W |
Connectivity
| Parameter | Value |
|---|---|
| USB Ports | 5 x USB 2.0 (1 front, 4 rear) |
| GPIB Interface | IEEE-488 bus connector, rear panel (Option GP3) |
Frequency
| Parameter | Value |
|---|---|
| External 10 MHz Reference Input Amplitude | -5 to +10 dBm (nominal) |
| External 10 MHz Reference Output Amplitude | ≥ 0 dBm (nominal) |
Technology
Signal and Spectrum Analysis
Applications
RF and Wireless Testing, R&D, and High-Speed Manufacturing