The Keysight (Agilent) N9038A MXE is a high-performance EMI receiver and signal analyzer designed for full-compliance testing to CISPR and MIL-STD standards. Built on the X-Series platform, it provides outstanding accuracy, sensitivity, and repeatability to ensure equipment meets stringent electromagnetic compatibility (EMC) regulations, featuring a built-in preselector and comprehensive diagnostic tools.
Specifications
Frequency
| Parameter | Value |
|---|---|
| Minimum Frequency | 20 Hz |
| Maximum Frequency | Up to 44 GHz (frequency-option dependent) |
General
| Parameter | Value |
|---|---|
| Reference Oscillator | 10 MHz |
| Interfaces | USB 2.0, LAN (1000Base-T), GPIB |
| Display | 8.4-inch XGA color TFT LCD |
Frequency Specifications
| Parameter | Value |
|---|---|
| Frequency Range Options | 20 Hz to 8.4 GHz (Opt 508), 26.5 GHz (Opt 526), 44 GHz (Opt 544) |
| EMI Resolution Bandwidths (CISPR) | 200 Hz, 9 kHz, 120 kHz, 1 MHz |
| EMI Resolution Bandwidths (MIL-STD) | 10 Hz, 100 Hz, 1 kHz, 10 kHz, 100 kHz, 1 MHz |
| Resolution Bandwidth (RBW) | 1 Hz to 3 MHz (10% steps), 4, 5, 6, 8 MHz |
Dynamic Range and Noise
| Parameter | Value |
|---|---|
| Preselector | Built-in preselection filters up to maximum frequency |
Sweep and Detectors
| Parameter | Value |
|---|---|
| EMI Detectors (CISPR) | Peak, Quasi-Peak, EMI Average, RMS Average |
| Standard Detectors | Normal, Peak, Sample, Negative Peak, Log Power Average, RMS Average, Voltage Average |
Software and Configuration Options
| Parameter | Value |
|---|---|
| Time Domain Scan Option | Available (Option TDS) |
| Measurement Applications | EMI Receiver, Spectrum Analyzer (built-in) |
Front and Rear Panel Interfaces
| Parameter | Value |
|---|---|
| RF Input Connector (8.4 GHz Option) | Type-N (female), 50 ohms |
| RF Input Connector (26.5 GHz Option) | 3.5 mm (male), 50 ohms |
| RF Input Connector (44 GHz Option) | 2.4 mm (male), 50 ohms |
| 10 MHz Reference Input | BNC (female) |
| 10 MHz Reference Output | BNC (female) |
| External Trigger Input | BNC (female) |
| Trigger Output | BNC (female) |
| LAN (Ethernet) Port | 1000Base-T LAN |
| USB Host Ports | USB 2.0 Type-A |
| USB Device Port | USB 2.0 Type-B |
| GPIB (IEEE-488) Interface | Standard |
Physical and Power
| Parameter | Value |
|---|---|
| Display Resolution | 1024 x 768 pixels (XGA) |
| Power Requirements (Voltage/Frequency) | 100 to 240 VAC, 50/60 Hz |
Technology
EMI Receiver / Signal Analyzer
Applications
EMC Compliance Testing