The Keysight N5222B is a high-performance PNA Microwave Network Analyzer offering leading measurement accuracy and speed. Designed for complex active and passive device testing, it features an upper frequency limit of 26.5 GHz and is highly configurable with 2-port or 4-port options, internal signal routing, and advanced measurement software.

Specifications

General

ParameterValue
Display12.1-inch capacitive multi-touch TFT color LCD (1280 x 800)
Data StorageRemovable Solid State Drive (SSD) on rear panel

Frequency Specifications

ParameterValue
Frequency Resolution1 Hz
Number of Points per Sweep1 to 100,001

Source Specifications

ParameterValue
Power Level Resolution0.01 dB

Test Ports

ParameterValue
Number of Ports2 or 4 ports (configuration dependent)
Port Connector Type3.5 mm (male)
Port Impedance50 ohms
Damage DC Voltage40 VDC

Connectivity & Interfaces

ParameterValue
LAN Interface10/100/1000 Base-T Ethernet
10 MHz Reference InputBNC (female)
10 MHz Reference OutputBNC (female)

Software & Control

ParameterValue
Operating SystemWindows 10
Internal Storage CapacityRemovable Solid State Drive (SSD)

Configuration Options

ParameterValue
Available Test Set Options (2-Port)Option 200 (Base), Option 201 (Configurable test set), Option 219 (Configurable test set, extended power, bias tees)
Available Test Set Options (4-Port)Option 400 (Base), Option 401 (Configurable test set), Option 419 (Configurable test set, extended power, bias tees)

Measurement

ParameterValue
Sweep TypesLinear frequency, Logarithmic frequency, CW, Power, Segmented
Measurement ParametersS-parameters, absolute power, ratioed power
Display FormatsLog magnitude, Linear magnitude, Phase, Unwrapped phase, Group delay, Smith chart, Polar, SWR, Real, Imaginary
Supported Calibration TypesSOLT, TRL, LRM, Unknown Thru, ECal
Magnitude Reference Level Range± 500 dB
Magnitude Reference Level Resolution0.001 dB
Phase Reference Level Range± 500°
Phase Reference Level Resolution0.01°

Physical & UI

ParameterValue
Screen Type12.1-inch WXGA (1280 x 800) multi-touch screen

Inputs & Outputs

ParameterValue
Bias Tee InputsBNC (female), rear panel (requires Option 219 or 419)
Maximum Bias Tee Voltage± 40 VDC
Maximum Bias Tee Current± 500 mA

Display

ParameterValue
Display Size12.1 inch
Display Resolution1280 x 800 pixels

Connectivity

ParameterValue
Video OutputDisplayPort (rear panel)
GPIB InterfaceIEEE-488.2 compatible (rear panel)

Technology

Vector Network Analysis (VNA)

Applications

Active and passive microwave component testing, S-parameter measurements, material measurements, and signal integrity analysis