The Keysight N5247B is a high-performance PNA-X Microwave Network Analyzer capable of measurements up to 67 GHz. Designed to replace multiple pieces of test equipment, it provides a highly integrated and flexible platform for measuring active devices such as amplifiers, mixers, and frequency converters. Featuring an advanced multi-touch interface, it supports a wide array of single-connection, multiple-measurement applications including S-parameters, noise figure, gain compression, and spectrum analysis.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | LAN, USB, GPIB |
| Display | 12.1-inch capacitive multi-touch LCD |
| Electronic Calibration (ECal) Support | Supported via USB |
| mmWave Extender Support | Supported (Compatible with VDI, OML, and Keysight N529x series) |
| Calibration Cycle | 1 year |
General Characteristics
| Parameter | Value |
|---|---|
| Frequency Range | 10 MHz to 67 GHz (900 Hz with option) |
| Number of Test Ports | 2 or 4 (configuration dependent) |
| Test Port Connector Type | 1.85 mm male |
| Test Port Impedance | 50 Ω |
| Number of Internal Sources | 1 (2-port models) or 2 (4-port models) |
| Built-in Bias Tees | Included (option dependent) |
System Performance
| Parameter | Value |
|---|---|
| Maximum Data Points per Sweep | 100,001 |
Test Port Output (Source)
| Parameter | Value |
|---|---|
| Frequency Resolution | 1 Hz |
Advanced Measurement Capabilities
| Parameter | Value |
|---|---|
| Noise Figure Measurement | Supported (option dependent) |
| Spectrum Analysis Capability | Supported (option dependent) |
| Intermodulation Distortion (IMD) | Supported |
| Gain Compression Measurement | Supported |
| Pulsed-RF Measurement Capabilities | Supported (option dependent) |
| Non-Linear Vector Network Analysis (NVNA) | Supported (option dependent) |
| True-Mode Stimulus (Differential) Support | Supported (4-port models with option) |
Data Processing & Control
| Parameter | Value |
|---|---|
| Operating System | Windows 10 |
| Internal Storage | Solid State Drive (SSD) |
| Time Domain Transformation | Supported (option dependent) |
| Fixture Simulator / De-embedding | Supported |
Front & Rear Panel Interfaces
| Parameter | Value |
|---|---|
| Display Size | 12.1 in |
| Display Resolution | 1280 x 800 |
| Trigger Inputs/Outputs | BNC |
| 10 MHz Reference Input | BNC |
| 10 MHz Reference Output | BNC |
Performance
| Parameter | Value |
|---|---|
| Sweep Types | Linear frequency, log frequency, CW time, power, segment, phase |
Inputs & Outputs
| Parameter | Value |
|---|---|
| Receiver Damage Level | +27 dBm, 40 VDC |
| Direct Receiver Access | Supported (Configuration/Option dependent) |
Measurement Capabilities
| Parameter | Value |
|---|---|
| Mixer / Converter Measurements | Supported (Scalar and Vector, configuration dependent) |
Compliance
| Parameter | Value |
|---|---|
| LXI Compliance | LXI Core compliant |
Technology
Vector Network Analysis (VNA)
Applications
Active device characterization, microwave component testing, amplifier and mixer measurements, radar and satellite component test