The Keysight N9010B EXA is a versatile X-Series signal analyzer that provides excellent general-purpose spectrum analysis and a broad range of application-specific measurements. Equipped with a multi-touch interface, it offers standard analysis bandwidth of 25 MHz (upgradeable to 40 MHz) and frequency coverage from 10 Hz up to 44 GHz, depending on configuration.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | USB 2.0 / 3.0, LAN (1000Base-T LXI), GPIB (IEEE-488) |
| Display | 10.6-inch capacitive multi-touch screen |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 100-240 V, 50/60 Hz; 100-120 V, 400 Hz |
| Operating Temperature | 0 to 55 |
| Dimensions (W×H×D) | 426 × 177 × 368 |
| Weight | 16.0 kg (nominal, without options) |
Frequency Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 10 Hz to 3.6, 7.0, 13.6, 26.5, 32, or 44 GHz (by option) |
| Frequency Options | Opt 503 (3.6 GHz), 507 (7.0 GHz), 513 (13.6 GHz), 526 (26.5 GHz), 532 (32 GHz), 544 (44 GHz) |
| Resolution Bandwidth (RBW) | 1 Hz to 3 MHz (10% steps), 4, 5, 6, 8 MHz |
| Sweep Points | 1 to 100,001 |
Amplitude Specifications
| Parameter | Value |
|---|---|
| Absolute Amplitude Accuracy | ± 0.27 dB |
| Maximum Safe Input Power | +30 dBm (1 W) |
Dynamic Range and Noise
| Parameter | Value |
|---|---|
| Phase Noise (10 kHz offset) | -109 dBc/Hz @ 1 GHz (typical) |
| Displayed Average Noise Level (DANL) | -150 dBm/Hz @ 1 GHz (without preamp, typical) |
| DANL with Preamplifier | -163 dBm/Hz @ 1 GHz (typical) |
| Third-Order Intermodulation (TOI) | +19 dBm @ 1 GHz |
Analysis Bandwidth
| Parameter | Value |
|---|---|
| Standard Analysis Bandwidth | 25 MHz |
| Maximum Upgradeable Analysis Bandwidth | 40 MHz (Option B40) |
Inputs, Outputs and Interfaces
| Parameter | Value |
|---|---|
| RF Input Impedance | 50 Ω |
Software and System
| Parameter | Value |
|---|---|
| Operating System | Windows 10 Embedded |
Display and System
| Parameter | Value |
|---|---|
| Data Storage | Removable Solid State Drive (SSD) |
Inputs & Outputs
| Parameter | Value |
|---|---|
| Mechanical Attenuator Range | 0 to 60 dB (2 dB steps) |
| Electronic Attenuator Range | 0 to 24 dB in 1 dB steps (Option EA3) |
| RF Input Connector (up to 26.5 GHz) | Type-N female, 50 Ω (standard for lower frequency options) |
| RF Input Connector (32 GHz & 44 GHz) | 2.4 mm male, 50 Ω (configuration dependent) |
Performance
| Parameter | Value |
|---|---|
| Sweep Time Range | 1 µs to 6000 s |
| Trigger Sources | Free run, line, video, external 1, external 2, RF burst, periodic timer |
| Amplitude Measurement Range | Displayed Average Noise Level (DANL) to +30 dBm |
| Video Bandwidth (VBW) | 1 Hz to 3 MHz (10% steps), 4, 5, 6, 8 MHz, and wide open |
| Mechanical Attenuator Step Size | 2 dB steps |
| Electronic Attenuator Step Size | 1 dB steps |
Measurement & Analysis
| Parameter | Value |
|---|---|
| Trace Detectors | Normal, Peak, Sample, Negative Peak, Log power average, RMS average, Voltage average |
| EMI Detectors | CISPR Peak, Quasi-peak, EMI Average, RMS Average |
| Preselector Bands | Utilized above 3.6 GHz (configuration dependent) |
Compliance
| Parameter | Value |
|---|---|
| LXI Compliance | LXI Core 2011 compliant (Version 1.4) |
| Safety Compliance | IEC/EN 61010-1, CAN/CSA-C22.2 No. 61010-1 |
| EMC Compliance | CISPR 11 / EN 55011 (Group 1, Class A), IEC/EN 61326-1, IEC/EN 61326-2-1 |
Environmental
| Parameter | Value |
|---|---|
| Operating Altitude | Up to 4,600 m (15,092 ft) |
Technology
Signal/Spectrum Analyzer
Applications
General-purpose spectrum analysis, component characterization, and cellular/wireless connectivity testing