The Keysight Technologies Infiniium UXR-Series UXR0134A is a high-performance real-time oscilloscope designed for high-speed digital design, optical research, and wideband RF applications. Featuring 4 channels, an analog bandwidth of 13 GHz, and a high-speed 10-bit hardware ADC, the UXR0134A delivers industry-leading signal integrity with an exceptionally low noise floor and ultra-low jitter performance. It operates on a Windows 10 platform powered by an Intel Xeon multi-core processor, providing deep analysis capabilities through standard and optional hardware/software integrations.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | 1x 10GBase-T LAN, 1x 1000Base-T LAN, USB 3.0 (host and device), 2x DisplayPort |
| Display | 15.4-inch capacitive touch screen, Full HD (1920 x 1080) resolution |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 100 to 240 VAC, 50/60 Hz, up to 1420 VA maximum |
| Operating Temperature | 5 to 40 °C |
| Dimensions (W×H×D) | 435 mm × 313 mm × 513 mm |
Vertical System
| Parameter | Value |
|---|---|
| Analog Bandwidth | 13 GHz |
| Number of Channels | 4 |
| Hardware ADC Resolution | 10-bit |
| Input Impedance | 50 Ω |
| Input Coupling | DC |
| Input Connector Type | Ruggedized 3.5 mm male (AutoProbe III) |
| Vertical Sensitivity Range | 1 mV/div to 1 V/div |
| DC Gain Accuracy | ±1.5% of full scale |
| Bandwidth Limit Filters | 1 GHz to 13 GHz in 1 GHz increments |
| Maximum Input Voltage | ±5 V peak, CAT I |
| Channel-to-Channel Isolation | ≥ 60 dB (DC to 13 GHz) |
Horizontal System & Sampling
| Parameter | Value |
|---|---|
| Maximum Real-Time Sample Rate | 128 GSa/s per channel (4-channel operation) |
| Standard Memory Depth | 200 Mpts per channel |
| Maximum Memory Depth Option | 2 Gpts per channel |
Trigger System
| Parameter | Value |
|---|---|
| Trigger Sources | Channels 1 to 4, Auxiliary Input, AC Line |
| Trigger Coupling | DC, AC, LF Reject, HF Reject, Noise Reject |
| Trigger Jitter | < 100 fs rms |
| Supported Trigger Types | Edge, edge transition, glitch, runt, timeout, pattern, state, window, window transition, setup/hold, sequence |
Acquisition Modes
| Parameter | Value |
|---|---|
| Real-Time Acquisition | Supported |
| Segmented Memory Mode | Supported |
| Average Mode | Supported (1 to 65,536 averages) |
| High-Resolution Mode | Up to 16-bit resolution (user-selectable) |
| Envelope Mode | Supported |
Signal Integrity
| Parameter | Value |
|---|---|
| Intrinsic Jitter | < 25 fs rms |
| Jitter Measurement Floor | < 100 fs rms |
Analysis & Measurement
| Parameter | Value |
|---|---|
| Automatic Measurements | Over 50 standard measurements (Amplitude, Time, Frequency, Mixed) |
| Jitter Analysis Option | Keysight EZJit / EZJit Plus / EZJit Complete |
| Waveform Math Functions | Add, Subtract, Multiply, Divide, FFT, Integrate, Differentiate, Square Root, Absolute |
| FFT Window Types | Hanning, Rectangular, Hamming, Blackman-Harris, Flattop |
| MATLAB Integration | Supported |
| Protocol Decoding Packages | Supports PCIe, USB, DDR, MIPI, Ethernet, SATA, HDMI |
Display & Interface
| Parameter | Value |
|---|---|
| Display Size | 15.4 inch |
| Display Resolution | 1920 × 1080 (Full HD) |
| Touchscreen Technology | Capacitive multi-touch |
| Waveform Graticules | Grid, Single, Dual, Quad, Octal, 16 Grid, XY |
Connectivity & I/O
| Parameter | Value |
|---|---|
| Probe Interface | AutoProbe III (supports active probes up to 30 GHz) |
| Auxiliary Trigger Input | Yes |
| Reference Clock Input | 10 MHz and 100 MHz |
| Reference Clock Output | 10 MHz and 100 MHz |
| LAN Interfaces | 1x 10GBase-T Ethernet, 1x 1000Base-T Ethernet |
| USB Host Ports | USB 3.0 (front and rear panels) |
| USB Device Port | USB 3.0 Type-B (rear panel) |
| External Display Outputs | 2x DisplayPort |
| Calibration Output Signal | Yes (front panel) |
Computer System
| Parameter | Value |
|---|---|
| Operating System | Windows 10 IoT Enterprise 64-bit |
| Processor | Intel Xeon Multi-Core |
| System RAM | 48 GB standard |
| Storage Drive | Removable 960 GB SSD |
| Removable Storage | Supported (removable solid-state drive) |
Power & Environmental
| Parameter | Value |
|---|---|
| Input Voltage Range | 100 to 240 VAC |
| Input Line Frequency | 50/60 Hz |
| Power Consumption | Up to 2000 W (maximum configuration) |
| Operating Temperature Range | 5 °C to +40 °C |
| Storage Temperature Range | -40 °C to +70 °C |
| Operating Humidity | 10% to 90% non-condensing |
Compliance & Support
| Parameter | Value |
|---|---|
| Calibration Cycle | 1 Year (recommended) |
| Standard Warranty | 3 Years |
| Safety Standards | IEC 61010-1, CAN/CSA-C22.2 No. 61010-1, UL 61010-1 |
| Electromagnetic Compatibility | IEC 61326-1, EN 61326-1, CISPR 11 / EN 55011 Class A |
Horizontal System
| Parameter | Value |
|---|---|
| Timebase Stability | ±50 ppb (0 °C to 50 °C, ambient) |
| Timebase Aging | ±100 ppb per year |
| Sample Clock Jitter | 25 fs rms (intrinsic) |
System Options
| Parameter | Value |
|---|---|
| Bandwidth Upgradeability | Upgrade-active options up to 110 GHz |
Performance
| Parameter | Value |
|---|---|
| Rise/Fall Time (10% to 90%) | 31.5 ps (typical) |
| Rise/Fall Time (20% to 80%) | 21.5 ps (typical) |
| Effective Number of Bits (ENOB) | 6.8 bits (typical, at 50 mV/div, 13 GHz) |
Inputs & Outputs
| Parameter | Value |
|---|---|
| External Reference Input Frequency | 10 MHz / 100 MHz (auto-selected) |
| External Reference Output Frequency | 10 MHz / 100 MHz (selectable) |
Environmental
| Parameter | Value |
|---|---|
| Maximum Operating Altitude | 3,000 m (9,842 ft) |
| Maximum Non-Operating Altitude | 15,300 m (50,200 ft) |
| Vibration (Operating) | 0.21 g (rms), 5 Hz to 500 Hz |
| Vibration (Non-Operating) | 2.09 g (rms), 5 Hz to 500 Hz |
| Shock (Non-Operating) | 30 g, half-sine, 11 ms |
Connectivity & Control
| Parameter | Value |
|---|---|
| LXI Compliance | LXI Core 2011 Device Specification Version 1.4 |
Technology
Digital Real-Time Oscilloscope
Applications
High-speed digital design, optical modulation analysis, radar and wideband RF validation, coherent optical research