SpecAtlasHub

HDO4034

LeCroy (Teledyne LeCroy)Digital

The Teledyne LeCroy HDO4034 is a high-definition 4-channel digital oscilloscope featuring 12-bit vertical resolution, a 350 MHz bandwidth, a real-time sampling rate of 2.5 GS/s, and a 12.1-inch WXGA touch screen display. Designed for advanced debugging and analysis, the HDO4034 delivers precise signal measurements and low noise floor using HD4096 high definition technology.

Embedded SystemsSignal AnalysisSignal Integrity

Specifications

General

ParameterValue
InterfacesUSB (host), USB (device), Ethernet port, External monitor port, GPIB port (optional)
Display12.1" WXGA (1280 x 800) touch screen color TFT-LCD with YT and XY grid styles

Physical

ParameterValue
Power Supply100 - 240 VAC (±10%) at 50/60 Hz, 115 VAC (±10%) at 400 Hz; Max Power Consumption: 320 W
Operating Temperature5 °C to +40 °C
Dimensions (W×H×D)399 mm × 291 mm × 131 mm
Weight5.86

Vertical System

ParameterValue
Analog Bandwidth (-3 dB)350 MHz
Calculated Rise Time (10% to 90%)1 ns (typical)
Number of Input Channels4
Input Coupling1 MΩ: AC, DC, GND; 50 Ω: DC, GND
Hardware Bandwidth Limits20 MHz, 200 MHz
Maximum Input Voltage1 MΩ: 400 V max (DC + Peak AC ≤ 10 kHz), 50 Ω: 5 V RMS
Vertical Resolution12 bits (up to 15 bits with ERES)
DC Gain Accuracy±0.5% of full scale
Input Sensitivity Range (1 MΩ)1 mV/div - 10 V/div
Input Sensitivity Range (50 Ω)1 mV/div - 1 V/div
Probe InterfaceTeledyne LeCroy ProBus
Channel-to-Channel Deskew Range±9 s
Enhanced Resolution (ERES)0.5 to 3 bits in 0.5-bit steps (up to 15-bit effective resolution)
Vertical Offset Range50 Ω: ±1 V (1 mV - 4.95 mV/div), ±5 V (5 mV - 99 mV/div), ±10 V (100 mV - 1 V/div); 1 MΩ: ±1 V (1 mV - 4.95 mV/div), ±10 V (5 mV - 99 mV/div), ±100 V (100 mV - 1 V/div), ±400 V (1.01 V - 10 V/div)

Horizontal System

ParameterValue
Maximum Real-Time Sampling Rate2.5 GS/s
Standard Record Length12.5 Mpts/Ch (all channels active), 25 Mpts/Ch (2 channels interleaved)
Optional Record Length25 Mpts/Ch (all channels active), 50 Mpts/Ch (2 channels interleaved)
Time Base Range20 ps/div - 1000 s/div
Time Base Accuracy±2.5 ppm

Trigger System

ParameterValue
Trigger SourcesCh 1 - Ch 4, EXT, EXT/10, AC Line
Trigger ModesNormal, Auto, Single, Stop
Trigger CouplingAC, DC, LF Rej, HF Rej
Trigger Holdoff Range2 ns to 20 s, or 1 to 1,000,000,000 events
Trigger TypesEdge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV-720p, 1080i, 1080pi), Runt, Slew Rate, Interval (signal or pattern), Dropout, Qualified (State or Edge)
Optional Serial Data TriggersI2C, SPI, UART/RS-232, CAN, LIN, FlexRay, SENT, MIL-STD-1553, ARINC 429, Audio (I2S, LJ, RJ, TDM), USB, USB-HSIC, MIPI D-PHY, DigRF3G
External Trigger Input Range±400 V (DC + Peak AC ≤ 10 kHz) at 1 MΩ
Trigger Level RangeInternal: ±6 divisions from center; External: ±400 mV; External with /10 attenuation: ±4 V

Acquisition System

ParameterValue
Maximum Waveform Capture RateUp to 125,000 waveforms/sec (WaveStream Fast Acquisition mode)
Acquisition ModesReal-Time, Roll, Sequence (Segmented memory up to 10,000 segments)
Sequence Mode Max Segments10,000 segments
InterpolationLinear or Sin(x)/x
Optional Digital Channels16 digital channels (with HDO4000-MS option)

Waveform Measurements

ParameterValue
Automatic Voltage MeasurementsAmplitude, Area, Base, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Peak-Peak, RMS, Standard Deviation, Top
Automatic Time MeasurementsDelay, Delta Period @ Level, Delta Time @ Level, Duty Cycle, Duty @ Level, Edge @ Level, Fall Time (90% - 10%), Fall Time (80% - 20%), Frequency, Frequency @ Level, Period, Period @ Level, Phase, Rise Time (10% - 90%), Rise Time (20% - 80%), Skew, Time @ Level, Width+, Width-

Math & Analysis

ParameterValue
Basic Math FunctionsAdd, Subtract, Multiply, Divide, FFT, Absolute Value, Averaging (summed and continuous), Derivative, Envelope, Enhanced Resolution, Floor, Integral, Invert, Reciprocal, Rescale, Roof, Square, Square Root, Trend, Zoom
FFT Window TypesVon Hann (Hanning), Hamming, Flat Top, Blackman-Harris

Display & User Interface

ParameterValue
Display TypeTFT LCD with resistive touch screen
Display Size12.1 inch
Display Resolution1280 x 800 (WXGA)
Waveform Display FormatsYT and XY grid styles

Connectivity & Ports

ParameterValue
USB Host PortsMultiple ports (front and rear) for storage, mouse, keyboard
USB Device Ports1 port for remote control
LAN Port (Ethernet)1 x RJ-45 (10/100/1000Base-T)
GPIB InterfaceOptional (via external USB-GPIB adapter)
External Video OutputExternal monitor port (VGA and HDMI)
Probe Calibration Output1 kHz, 1 V p-p square wave
Reference Clock Input10 MHz
Reference Clock Output10 MHz

Processor & Storage

ParameterValue
Internal Operating SystemWindows Embedded Standard 7
System Memory (RAM)4 GB
Internal Storage250 GB or larger HDD
Waveform Storage Capacity4 memory waveforms plus internal HDD
Setup Storage Capacity6 setups

Environmental Specifications

ParameterValue
Storage Temperature Range-20 °C to +60 °C
Operating Humidity Range5% to 80% RH (non-condensing) at ≤ 30 °C, de-rating to 50% RH at 40 °C
Operating AltitudeUp to 3,000 m (9,843 ft) at ≤ 25 °C

Physical Characteristics

ParameterValue
Form FactorBenchtop

Compliance and Standards

ParameterValue
Calibration Interval1 year

Computer System

ParameterValue
ProcessorIntel Core i3-2330E Dual Core, 2.2 GHz (or equivalent)

Interfaces & Connectivity

ParameterValue
LXI ComplianceLXI Class C compliant

Accessories

ParameterValue
Standard Probes4 x PP018 (10:1, 10 MΩ, 350 MHz) Passive Probes

Timebase

ParameterValue
Timebase Aging±1.0 ppm/year

Compliance & Certifications

ParameterValue
Safety CertificationsUL 61010-1, CAN/CSA-C22.2 No. 61010-1, EN 61010-1
EMC CertificationsEN 61326-1, EN 61326-2-1, FCC Class A, ICES-003

Display

ParameterValue
Grid StylesAuto, Single, Dual, Quad, Octal, XY, Single+XY, Dual+XY

Technology

HD4096 High Definition Technology

Applications

Electronic design, embedded systems, power analysis, automotive diagnostics, and high-precision testing