The Teledyne LeCroy HDO4104-MS is a 1 GHz, 4-channel High Definition Oscilloscope featuring 12-bit ADC technology, a 12.1-inch widescreen touch display, and 16 integrated digital channels for comprehensive mixed-signal design and debugging.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | LAN (10/100/1000Base-T Ethernet), 4x USB Host (2 front, 2 rear), 1x USB Device, GPIB (optional via external adapter), LXI Class C |
| Display | 12.1-inch widescreen capacitive touchscreen, 1280 x 800 resolution |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 100 - 240 VAC (±10%) at 50/60 Hz (±10%), 100 - 120 VAC (±10%) at 400 Hz; 200 W maximum power consumption |
| Operating Temperature | 5 to 40 |
| Dimensions (W×H×D) | 399 × 291 × 131 |
| Weight | 5.8 |
| VESA Mount Pattern | 100 mm x 100 mm |
Vertical System - Analog
| Parameter | Value |
|---|---|
| Analog Bandwidth (-3 dB) | 1 GHz |
| Number of Analog Channels | 4 |
| Vertical Resolution (ADC) | 12 bits |
| Vertical Resolution (ERES) | Up to 15 bits |
| Calculated Rise Time (10% to 90%) | 350 ps (typical) |
| Input Impedance (Analog) | 50 Ω ±1.0% or 1 MΩ ±1.0% || 16 pF |
| Input Coupling | 50 Ω: DC; 1 MΩ: AC, DC, GND |
| Input Sensitivity Range (50 Ω) | 1 mV/div - 1 V/div |
| Input Sensitivity Range (1 MΩ) | 1 mV/div - 10 V/div |
| DC Gain Accuracy | ±0.5% of full scale |
| Maximum Input Voltage (50 Ω) | 5 Vrms |
| Maximum Input Voltage (1 MΩ) | 400 V max (DC + Peak AC <= 10 kHz) |
| Hardware Bandwidth Limits | 20 MHz, 200 MHz |
Vertical System - Digital
| Parameter | Value |
|---|---|
| Number of Digital Channels | 16 |
| Input Impedance (Digital) | 100 kΩ || 5.0 pF |
| Maximum Input Voltage (Digital) | ±30 V non-destruct |
| Threshold Selection | TTL, CMOS, ECL, PECL, LVDS, User-Defined |
| User-Defined Threshold Range | ±10 V in 10 mV steps |
| Minimum Input Voltage Swing | 500 mV p-p |
Horizontal System
| Parameter | Value |
|---|---|
| Maximum Real-Time Sampling Rate (Analog) | 2.5 GS/s (all channels) |
| Maximum Sampling Rate (Digital) | 1.25 GS/s |
| Standard Record Length | 12.5 Mpts/ch (all channels) |
| Maximum Record Length | 25 Mpts/ch (with HDO4K-MEM-EXT option) |
| Time Base Range | 200 ps/div - 1000 s/div |
| Time Base Accuracy | ±10 ppm |
| Minimum Detectable Pulse Width (Digital) | 2 ns |
| Timebase Delay Range | Pre-trigger: 0% to 100% of full scale; Post-trigger: 0 to 10,000 divisions |
Trigger System
| Parameter | Value |
|---|---|
| Trigger Sources | Any input channel, External, Line, Ext/10 |
| Trigger Modes | Auto, Normal, Single, Stop |
| Trigger Coupling | AC, DC, HFRej, LFRej |
| Trigger Holdoff Range | 2 ns - 20 s (or 1 to 99,999,999 events) |
| Edge Triggering | Triggers on rising, falling, or both edges |
| Runt Triggering | Positive or negative runts defined by two thresholds |
| Pulse Width Triggering | 2 ns - 20 s |
| Interval Triggering | 2 ns - 20 s |
| Dropout Triggering | 2 ns - 20 s |
| External Trigger Input Impedance | 1 MΩ || 16 pF |
| External Trigger Maximum Input Voltage | 400 V max (DC + Peak AC ≤ 10 kHz) |
| Trigger Jitter | < 2.8 ps rms (typical), < 1 ps rms (typical) with Software Assisted Trigger |
| Internal Trigger Level Range | ±4.1 divisions from center |
| External Trigger Level Range | ±400 mV (EXT), ±4 V (EXT/10) |
| Edge Trigger Sensitivity (Internal) | 0.9 div (< 10 MHz), 1.0 div (< 200 MHz), 1.5 div (< 500 MHz), 2.0 div (< 1 GHz) |
Acquisition System
| Parameter | Value |
|---|---|
| Acquisition Modes | Real-time, Roll, Sequence (Segmented Memory) |
| Sequence Mode Segments | Up to 10,000 segments |
| Averaging Factor Range | Summed or continuous averaging up to 1,000,000 sweeps |
| Sequence Mode Minimum Inter-segment Time | 1.0 µs |
Waveform Measurements and Analysis
| Parameter | Value |
|---|---|
| Automatic Voltage and Time Measurements | Up to 8 displayed simultaneously with statistics |
| Basic Math Functions | Add, Subtract, Multiply, Divide, FFT, Absolute Value, Average, Derivative, Envelope, Enhanced Resolution, Integral, Invert, Reciprocal, Rescale, Square, Square Root, Zoom |
| FFT Window Types | Von Hann (Hanning), Hamming, Flat Top, Blackman-Harris, Rectangular |
| FFT Vertical Scale Options | dBm, dBV, Vrms, Industry Standard Units |
Connectivity and Ports
| Parameter | Value |
|---|---|
| Auxiliary Output | Trigger Out, Pass/Fail |
| Reference Clock Input | 10 MHz (BNC connector) |
Processor and Storage
| Parameter | Value |
|---|---|
| Internal Operating System | Windows Embedded Standard 7 (64-bit) |
| System Memory (RAM) | 4 GB (standard) |
Environmental Specifications
| Parameter | Value |
|---|---|
| Storage Temperature Range | -20 °C to 60 °C |
| Operating Humidity Range | 5% to 80% RH (non-condensing) up to 30 °C |
Compliance and Standards
| Parameter | Value |
|---|---|
| Calibration Interval | 1 year |
Display
| Parameter | Value |
|---|---|
| Display Resolution | 1280 × 800 (WXGA) |
| Touch Screen | Resistive touch screen |
| Display Size | 12.1 inches (30.7 cm) diagonal |
Analog Vertical System
| Parameter | Value |
|---|---|
| Probes Interface | ProBus |
| Offset Range (1 MΩ) | ±1 V (1 mV - 4.98 mV), ±1.5 V (5 mV - 9.9 mV), ±3 V (10 mV - 19.8 mV), ±8 V (20 mV - 99 mV), ±15 V (100 mV - 198 mV), ±80 V (200 mV - 990 mV), ±150 V (1 V - 1.98 V), ±400 V (2 V - 10 V) |
Digital Vertical System
| Parameter | Value |
|---|---|
| Digital Channel Maximum Input Frequency | 250 MHz |
| Digital Threshold Settings | 2 independent threshold controls (D0-D7 and D8-D15) |
Connectivity
| Parameter | Value |
|---|---|
| Host USB Ports | 6 x USB 2.0 (2 front, 4 rear) |
| LAN Port | 1 x RJ-45 (10/100/1000Base-T) |
Math and Analysis
| Parameter | Value |
|---|---|
| Zoom Traces | 4 standard zoom traces |
Power
| Parameter | Value |
|---|---|
| Power Consumption (Maximum) | 320 VA |
| Power Consumption (Typical) | 150 W |
Vertical System
| Parameter | Value |
|---|---|
| Hardware Bandwidth Limit Filters | 20 MHz, 200 MHz |
| Channel-to-Channel Isolation | > 100:1 up to 250 MHz, > 40:1 up to 1 GHz |
Digital Channels
| Parameter | Value |
|---|---|
| Digital Channel Record Length | 25 Mpts |
| Digital Channel Vertical Resolution | 1 bit |
| Digital Input Dynamic Range | ±20 V |
| Digital Trigger Types | Edge, Pattern, State |
Interfaces
| Parameter | Value |
|---|---|
| USB Device Port | 1 x USB 2.0 Type-B (supports USBTMC) |
| External Display Outputs | 1 x HDMI, 1 x DisplayPort |
| LXI Compliance | LXI Class C |
Power Requirements
| Parameter | Value |
|---|---|
| AC Input Voltage | 100 to 240 VAC (±10%) |
| AC Input Frequency | 50/60 Hz (±10%) at 100 to 240 VAC, 400 Hz (±5%) at 100 to 120 VAC |
Compliance
| Parameter | Value |
|---|---|
| Safety Compliance | Conforms to EN 61010-1:2010, EN 61010-2-030:2010, UL 61010-1, CAN/CSA C22.2 No. 61010-1-12 |
| EMC Compliance | Conforms to EN 61326-1:2006, EN 61326-2-1:2006 |
Technology
Digital Oscilloscope with HD4096 High Definition Technology
Applications
Mixed-signal design, embedded systems debugging, power analysis, and precision analog measurements
Looking for the LeCroy (Teledyne LeCroy) HDO4104-MS?
Tell us what you need. We're building a network of equipment dealers and will get back to you if we can help source it — no obligation.
Selling this kind of equipment? Sell with us