The Teledyne LeCroy LT364L is a 500 MHz, 4-channel digital oscilloscope from the WaveRunner LT series. Designed with 1 Mpts of acquisition memory per channel (up to 2 Mpts when interleaved), an 8.4-inch color TFT display, and a robust suite of troubleshooting and analysis tools, it provides exceptional single-shot and repetitive signal capture capabilities for design and debug professionals.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | GPIB (IEEE-488.2), RS-232-C (DB-9), Centronics parallel, VGA out, External Trigger input, LAN (optional) |
| Display | 8.4 inch color TFT-LCD, 640 × 480 VGA resolution |
| Real-Time Clock | Built-in, provides date and time stamps |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 90 to 250 V AC, 45 to 66 Hz, automatic AC voltage selection, max 200 VA |
| Operating Temperature | 5 to 40 °C |
| Dimensions (W×H×D) | 350 mm × 210 mm × 300 mm |
Vertical System
| Parameter | Value |
|---|---|
| Analog Bandwidth (-3 dB) | 500 MHz |
| Calculated Rise Time | 700 ps |
| Number of Input Channels | 4 |
| Vertical Resolution | 8-bit ADC |
| Input Impedance | 1 MΩ || 12 pF or 50 Ω |
| Input Coupling | AC, DC, GND |
| Input Sensitivity (1 MΩ) | 2 mV/div to 10 V/div |
| Input Sensitivity (50 Ω) | 2 mV/div to 1 V/div |
| DC Gain Accuracy | ±1.5% of full scale |
| Maximum Input Voltage (1 MΩ) | 400 V max (DC + Peak AC ≤ 10 kHz) |
| Maximum Input Voltage (50 Ω) | 5 V rms |
| Bandwidth Limiters | 25 MHz, 200 MHz |
| Enhanced Resolution (ERES) | Up to 11 bits |
Horizontal System
| Parameter | Value |
|---|---|
| Maximum Real-Time Sampling Rate (4 Channels) | 1 GS/s |
| Maximum Real-Time Sampling Rate (2 Channels Interleaved) | 2 GS/s |
| Random Interleaved Sampling (RIS) Rate | 50 GS/s |
| Standard Record Length (4 Channels) | 1 Mpts/ch |
| Standard Record Length (2 Channels Interleaved) | 2 Mpts |
| Time Base Range | 500 ps/div to 1000 s/div |
| Time Base Accuracy | ≤ 10 ppm |
Trigger System
| Parameter | Value |
|---|---|
| Trigger Sources | Ch 1, Ch 2, Ch 3, Ch 4, Line, Ext, Ext/10 |
| Trigger Modes | Auto, Normal, Single, Stop |
| Edge Triggering | Positive or negative slope |
| SMART Triggers | Glitch, Pulse Width, Interval, Dropout, State/Pattern qualified |
Acquisition System
| Parameter | Value |
|---|---|
| Acquisition Modes | Real-time, Roll, RIS, Single-shot |
| Sequence Mode (Segmented Memory) | Up to 4,000 segments |
Waveform Measurements and Analysis
| Parameter | Value |
|---|---|
| Automatic Measurements | Up to 5 simultaneous measurements with statistics |
| FFT Window Types | von Hann (Hanning), Hamming, Flat-top, Rectangular |
Display and User Interface
| Parameter | Value |
|---|---|
| Graticule Options | Single, Dual, Quad, Octal, XY, YT, Variable Intensity |
Processor and Storage
| Parameter | Value |
|---|---|
| Internal Storage | 3.5 inch 1.44 MB floppy drive |
| PCMCIA Slots | One Type II PCMCIA slot |
Environmental Specifications
| Parameter | Value |
|---|---|
| Storage Temperature Range | -20 °C to 60 °C |
| Operating Humidity Range | 80% RH at 30 °C, decreasing linearly to 45% RH at 40 °C |
| Operating Altitude | Up to 3,048 m (10,000 ft) |
Physical Characteristics
| Parameter | Value |
|---|---|
| Form Factor | Benchtop |
Compliance and Standards
| Parameter | Value |
|---|---|
| Safety Certifications | UL 3111-1, CSA C22.2 No. 1010.1, EN 61010-1 |
| Electromagnetic Compatibility | EN 50081-1, EN 50082-1, FCC Class A |
Inputs & Outputs
| Parameter | Value |
|---|---|
| Probe Interface | Teledyne LeCroy ProBus |
| External Trigger Input | 1 MΩ || 15 pF; max input 400 V max |
| External Display Output | 15-pin D-Sub (VGA) |
| Printer Port | Centronics parallel port |
| Serial Port | RS-232-C (DB-9 male, up to 115.2 kbps) |
| GPIB Port | IEEE-488.2 |
Storage
| Parameter | Value |
|---|---|
| Floppy Drive | 3.5 inch, 1.44 MB (DOS compatible) |
Documentation & Printing
| Parameter | Value |
|---|---|
| Supported Hardcopy Formats | TIFF, BMP, HPGL, PostScript |
Software & Options
| Parameter | Value |
|---|---|
| Optional Software Packages | WaveAnalyzer (WAVA), Digital Filter Package (DFP), Jitter and Timing Analysis (JTA) |
System
| Parameter | Value |
|---|---|
| Processor | 96 MHz PowerPC |
Signal Outputs
| Parameter | Value |
|---|---|
| Calibrator Output | 1 kHz, 1 V into ≥ 10 kΩ |
Technology
Digital Storage Oscilloscope (DSO)
Applications
Electronic Design, Debugging, and Troubleshooting
Looking for the LeCroy (Teledyne LeCroy) LT364L?
Tell us what you need. We're building a network of equipment dealers and will get back to you if we can help source it — no obligation.
Selling this kind of equipment? Sell with us