WaveRunner 104MXi

The Teledyne LeCroy WaveRunner 104MXi is a high-performance 4-channel Digital Storage Oscilloscope (DSO) offering a 1 GHz analog bandwidth and a real-time sampling rate up to 10 GS/s. Engineered with standard 12.5 Mpts/channel acquisition memory (expandable to 25 Mpts on interleaved channels), it features a large 10.4-inch SVGA touch screen display, advanced triggering capabilities, and an extensive suite of mathematical and analysis tools ideal for troubleshooting and validating complex designs.

Embedded Systems Serial Data Analysis Signal Integrity

Specifications

General

Parameter	Value
Interfaces	LAN (10/100/1000Base-T RJ-45), 6 x USB 2.0 (1 front, 5 side), SVGA Video Out, RS-232, GPIB (optional)
Display	10.4-inch color TFT-LCD touch screen, 800 x 600 (SVGA)

Physical

Parameter	Value
Power Supply	100 to 240 VAC (±10%) at 50/60 Hz; 100 to 120 VAC at 400 Hz; Max 340 W
Operating Temperature	5 °C to 40 °C
Dimensions (W×H×D)	340 mm × 260 mm × 152 mm
Weight	7.26
VESA Mounting	100 mm × 100 mm VESA compliant

Vertical System

Parameter	Value
Analog Bandwidth (-3 dB)	1 GHz
Number of Channels	4
Vertical Resolution	8-bit (up to 11-bit with Enhanced Resolution ERES)
Input Coupling	AC, DC, GND (50 Ω is DC only)
Input Impedance	1 MΩ \|\| 16 pF or 50 Ω
Calculated Rise Time (10% to 90%)	375 ps (typical)
DC Gain Accuracy	±1.5% of full scale
Vertical Sensitivity (1 MΩ)	2 mV/div - 10 V/div
Vertical Sensitivity (50 Ω)	2 mV/div - 1 V/div
Maximum Input Voltage (1 MΩ)	400 V max (DC + Peak AC <= 10 kHz)
Maximum Input Voltage (50 Ω)	5 Vrms
Hardware Bandwidth Limiters	20 MHz, 200 MHz
Vertical Resolution (with ERRES)	Up to 11 bits
Low Frequency Limit (AC Coupling)	< 10 Hz (typical, at input BNC)
Channel-to-Channel Isolation	40 dB (typical, from DC to 1 GHz)

Horizontal System & Acquisition

Parameter	Value
Maximum Sampling Rate (Single-channel)	10 GS/s (interleaved)
Maximum Sampling Rate (Multi-channel)	5 GS/s (4 channels)
Standard Memory Depth	25 Mpts (interleaved), 12.5 Mpts/ch (4 channels)
Time Base Range	200 ps/div - 1000 s/div
Channel-to-Channel Deskew Range	±4.5 ns

Trigger System

Parameter	Value
Trigger Modes	Auto, Normal, Single, Stop
Trigger Coupling	AC, DC, HFRej, LFRej
Standard Trigger Types	Edge, Width, Glitch, Period, Timeout, Dropout, Pattern, TV-Trigger
Advanced / Protocol Triggers	I2C, SPI, UART/RS-232, CAN, LIN (optional software dependent)
Trigger Level Range	Internal: ±4.1 div from center; External: ±400 mV (with Ext/10: ±4 V)
Trigger Holdoff Range	100 ns to 20 s (or events)
Trigger Jitter	≤ 3 ps rms (typical)
Edge Trigger Sensitivity	1.0 div (DC to 1 GHz) at 50 Ω

Acquisition Modes & Signal Processing

Parameter	Value
FFT Window Types	von Hann (Hanning), Hamming, Flat Top, Blackman-Harris, Rectangular
Waveform Math Operators	Sum, Difference, Product, Ratio, FFT, Derivative, Integral, Rescale

Measurements & Analysis

Parameter	Value
Automatic Voltage Measurements	Amplitude, Base, Max, Min, Mean, Peak-to-Peak, RMS, Top
Automatic Time & Frequency Measurements	Frequency, Period, Rise Time, Fall Time, Width, Duty Cycle, Delay, Phase
Measurement Statistics	Mean, Min, Max, Standard Deviation, Count
Cursor Measurements	Time, Voltage, Tracking

Input/Output Interfaces

Parameter	Value
External Trigger Input	Front-panel BNC
External Video Display Output	15-pin D-Sub (SVGA) connector

Power & Physical Characteristics

Parameter	Value
Cooling	Forced air, temperature-controlled fan

Environmental & Compliance

Parameter	Value
Storage Temperature Range	-20 °C to +60 °C
Operating Humidity Range	5% to 80% relative humidity (non-condensing)
Operating Altitude	Up to 3,048 m (10,000 ft)
Safety Certifications	UL 61010-1, EN 61010-1
Electromagnetic Compatibility (EMC)	EN 61326, FCC Class A

Processing System

Parameter	Value
Operating System	Windows XP Embedded
System Memory (RAM)	1 GB standard
Internal Storage	40 GB (or larger) hard disk drive

Connectivity & I/O

Parameter	Value
Probe Interface	Teledyne LeCroy ProBus
USB Ports	5 × USB 2.0 (1 front, 4 rear)
LAN Port	1 × 10/100/1000Base-T (RJ-45)
GPIB Port	Optional (via external USB-GPIB adapter or PCIe card)
Auxiliary Output	Rear-panel BNC (Trigger Out or Pass/Fail)

Data Management & Export

Parameter	Value
Waveform Storage Formats	Binary, ASCII, Excel, MATLAB, Mathcad

General & Calibration

Parameter	Value
Calibration Interval	1 year
Standard Passive Probes	4 × PP008 (10:1, 500 MHz, 10 MΩ)

Acquisition

Parameter	Value
Optional Memory Depths	None (12.5 Mpts/ch standard, 25 Mpts interleaved)
Waveform Interpolation	Linear, Sin(x)/x
Sequence Mode Segments	Up to 10,000 (option dependent); 1,000 standard

Triggering

Parameter	Value
External Trigger Input Range	EXT: ±400 mV; EXT/10: ±4 V; EXT/100: ±40 V
External Trigger Input Impedance	1 MΩ \|\| 15 pF or 50 Ω
External Trigger Max Input Voltage (1 MΩ)	400 V max (DC + Peak AC < 10 kHz)
External Trigger Max Input Voltage (50 Ω)	5 V rms

Timebase

Parameter	Value
10 MHz Reference Input	BNC, 10 MHz
10 MHz Reference Output	BNC, 10 MHz

Auxiliary I/O

Parameter	Value
Calibration Output	1 kHz square wave, 1 V p-p into ≥ 100 kΩ

Math & Analysis

Parameter	Value
Optional Serial Protocol Decoders	I2C, SPI, UART, CAN, LIN, FlexRay, MIL-STD-1553

Technology

Digital Storage Oscilloscope

Applications

Electronic Design and Debugging, Power Analysis, Serial Data Analysis, Embedded Systems

Looking for the LeCroy (Teledyne LeCroy) WaveRunner 104MXi?

Tell us what you need. We're building a network of equipment dealers and will get back to you if we can help source it — no obligation.

Selling this kind of equipment? Sell with us