The Teledyne LeCroy WaveRunner 104MXi is a high-performance 4-channel Digital Storage Oscilloscope (DSO) offering a 1 GHz analog bandwidth and a real-time sampling rate up to 10 GS/s. Engineered with standard 12.5 Mpts/channel acquisition memory (expandable to 25 Mpts on interleaved channels), it features a large 10.4-inch SVGA touch screen display, advanced triggering capabilities, and an extensive suite of mathematical and analysis tools ideal for troubleshooting and validating complex designs.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | LAN (10/100/1000Base-T RJ-45), 6 x USB 2.0 (1 front, 5 side), SVGA Video Out, RS-232, GPIB (optional) |
| Display | 10.4-inch color TFT-LCD touch screen, 800 x 600 (SVGA) |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 100 to 240 VAC (±10%) at 50/60 Hz; 100 to 120 VAC at 400 Hz; Max 340 W |
| Operating Temperature | 5 °C to 40 °C |
| Dimensions (W×H×D) | 340 mm × 260 mm × 152 mm |
| Weight | 7.26 |
| VESA Mounting | 100 mm × 100 mm VESA compliant |
Vertical System
| Parameter | Value |
|---|---|
| Analog Bandwidth (-3 dB) | 1 GHz |
| Number of Channels | 4 |
| Vertical Resolution | 8-bit (up to 11-bit with Enhanced Resolution ERES) |
| Input Coupling | AC, DC, GND (50 Ω is DC only) |
| Input Impedance | 1 MΩ || 16 pF or 50 Ω |
| Calculated Rise Time (10% to 90%) | 375 ps (typical) |
| DC Gain Accuracy | ±1.5% of full scale |
| Vertical Sensitivity (1 MΩ) | 2 mV/div - 10 V/div |
| Vertical Sensitivity (50 Ω) | 2 mV/div - 1 V/div |
| Maximum Input Voltage (1 MΩ) | 400 V max (DC + Peak AC <= 10 kHz) |
| Maximum Input Voltage (50 Ω) | 5 Vrms |
| Hardware Bandwidth Limiters | 20 MHz, 200 MHz |
| Vertical Resolution (with ERRES) | Up to 11 bits |
| Low Frequency Limit (AC Coupling) | < 10 Hz (typical, at input BNC) |
| Channel-to-Channel Isolation | 40 dB (typical, from DC to 1 GHz) |
Horizontal System & Acquisition
| Parameter | Value |
|---|---|
| Maximum Sampling Rate (Single-channel) | 10 GS/s (interleaved) |
| Maximum Sampling Rate (Multi-channel) | 5 GS/s (4 channels) |
| Standard Memory Depth | 25 Mpts (interleaved), 12.5 Mpts/ch (4 channels) |
| Time Base Range | 200 ps/div - 1000 s/div |
| Channel-to-Channel Deskew Range | ±4.5 ns |
Trigger System
| Parameter | Value |
|---|---|
| Trigger Modes | Auto, Normal, Single, Stop |
| Trigger Coupling | AC, DC, HFRej, LFRej |
| Standard Trigger Types | Edge, Width, Glitch, Period, Timeout, Dropout, Pattern, TV-Trigger |
| Advanced / Protocol Triggers | I2C, SPI, UART/RS-232, CAN, LIN (optional software dependent) |
| Trigger Level Range | Internal: ±4.1 div from center; External: ±400 mV (with Ext/10: ±4 V) |
| Trigger Holdoff Range | 100 ns to 20 s (or events) |
| Trigger Jitter | ≤ 3 ps rms (typical) |
| Edge Trigger Sensitivity | 1.0 div (DC to 1 GHz) at 50 Ω |
Acquisition Modes & Signal Processing
| Parameter | Value |
|---|---|
| FFT Window Types | von Hann (Hanning), Hamming, Flat Top, Blackman-Harris, Rectangular |
| Waveform Math Operators | Sum, Difference, Product, Ratio, FFT, Derivative, Integral, Rescale |
Measurements & Analysis
| Parameter | Value |
|---|---|
| Automatic Voltage Measurements | Amplitude, Base, Max, Min, Mean, Peak-to-Peak, RMS, Top |
| Automatic Time & Frequency Measurements | Frequency, Period, Rise Time, Fall Time, Width, Duty Cycle, Delay, Phase |
| Measurement Statistics | Mean, Min, Max, Standard Deviation, Count |
| Cursor Measurements | Time, Voltage, Tracking |
Input/Output Interfaces
| Parameter | Value |
|---|---|
| External Trigger Input | Front-panel BNC |
| External Video Display Output | 15-pin D-Sub (SVGA) connector |
Power & Physical Characteristics
| Parameter | Value |
|---|---|
| Cooling | Forced air, temperature-controlled fan |
Environmental & Compliance
| Parameter | Value |
|---|---|
| Storage Temperature Range | -20 °C to +60 °C |
| Operating Humidity Range | 5% to 80% relative humidity (non-condensing) |
| Operating Altitude | Up to 3,048 m (10,000 ft) |
| Safety Certifications | UL 61010-1, EN 61010-1 |
| Electromagnetic Compatibility (EMC) | EN 61326, FCC Class A |
Processing System
| Parameter | Value |
|---|---|
| Operating System | Windows XP Embedded |
| System Memory (RAM) | 1 GB standard |
| Internal Storage | 40 GB (or larger) hard disk drive |
Connectivity & I/O
| Parameter | Value |
|---|---|
| Probe Interface | Teledyne LeCroy ProBus |
| USB Ports | 5 × USB 2.0 (1 front, 4 rear) |
| LAN Port | 1 × 10/100/1000Base-T (RJ-45) |
| GPIB Port | Optional (via external USB-GPIB adapter or PCIe card) |
| Auxiliary Output | Rear-panel BNC (Trigger Out or Pass/Fail) |
Data Management & Export
| Parameter | Value |
|---|---|
| Waveform Storage Formats | Binary, ASCII, Excel, MATLAB, Mathcad |
General & Calibration
| Parameter | Value |
|---|---|
| Calibration Interval | 1 year |
| Standard Passive Probes | 4 × PP008 (10:1, 500 MHz, 10 MΩ) |
Acquisition
| Parameter | Value |
|---|---|
| Optional Memory Depths | None (12.5 Mpts/ch standard, 25 Mpts interleaved) |
| Waveform Interpolation | Linear, Sin(x)/x |
| Sequence Mode Segments | Up to 10,000 (option dependent); 1,000 standard |
Triggering
| Parameter | Value |
|---|---|
| External Trigger Input Range | EXT: ±400 mV; EXT/10: ±4 V; EXT/100: ±40 V |
| External Trigger Input Impedance | 1 MΩ || 15 pF or 50 Ω |
| External Trigger Max Input Voltage (1 MΩ) | 400 V max (DC + Peak AC < 10 kHz) |
| External Trigger Max Input Voltage (50 Ω) | 5 V rms |
Timebase
| Parameter | Value |
|---|---|
| 10 MHz Reference Input | BNC, 10 MHz |
| 10 MHz Reference Output | BNC, 10 MHz |
Auxiliary I/O
| Parameter | Value |
|---|---|
| Calibration Output | 1 kHz square wave, 1 V p-p into ≥ 100 kΩ |
Math & Analysis
| Parameter | Value |
|---|---|
| Optional Serial Protocol Decoders | I2C, SPI, UART, CAN, LIN, FlexRay, MIL-STD-1553 |
Technology
Digital Storage Oscilloscope
Applications
Electronic Design and Debugging, Power Analysis, Serial Data Analysis, Embedded Systems