The Teledyne LeCroy WaveRunner 64Xi is a 600 MHz, 4-channel digital oscilloscope designed to provide powerful analysis capabilities in a compact benchtop form factor. Featuring a large touch screen, high sampling rates, and comprehensive triggering and analysis toolsets, it is optimized for efficient debugging and signal evaluation.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | 10/100/1000Base-T Gigabit Ethernet (RJ-45), 5 x USB 2.0 Host ports, 1 x USB 2.0 Device port, External SVGA video output, RS-232, GPIB (via optional accessory) |
| Display | 10.4" TFT-LCD Color Touch Screen, 800 x 600 SVGA resolution |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 90 to 264 VAC, 47 to 63 Hz (automatic AC selection), max power consumption 340 W |
| Operating Temperature | +5 °C to +40 °C |
| Dimensions (W×H×D) | 340 mm x 260 mm x 152 mm |
Vertical System
| Parameter | Value |
|---|---|
| Analog Bandwidth | 600 MHz |
| Number of Channels | 4 |
| Rise Time (10% to 90%) | < 583 ps |
| Input Impedance | 1 MΩ || 16 pF or 50 Ω |
| Input Coupling | AC, DC, GND (AC available only on 1 MΩ) |
| Vertical Resolution | 8-bit (up to 11-bit with Enhanced Resolution / ERES) |
| Sensitivity Range | 2 mV/div - 10 V/div (1 MΩ); 2 mV/div - 1 V/div (50 Ω) |
| DC Vertical Gain Accuracy | ±1.5% (typical) |
| Maximum Input Voltage | 50 Ω: 5 Vrms; 1 MΩ: 400 V max (DC + Peak AC <= 10 kHz) |
| Bandwidth Limiters | 20 MHz, 200 MHz |
| Offset Range | ±1 V (2 mV–194 mV/div, 50 Ω / 1 MΩ), ±10 V (196 mV–1 V/div, 50 Ω / 1 MΩ), ±100 V (1.02 V–10 V/div, 1 MΩ) |
| Probe Interface | Teledyne LeCroy ProBus |
| Enhanced Resolution (ERES) | Up to 11 bits |
| Channel-to-Channel Isolation | > 40 dB (100:1) up to 600 MHz |
| Input Capacitance | 16 pF (typical) @ 1 MΩ |
| DC Vertical Offset Accuracy | ±(1.5% of offset setting + 0.5% of full scale + 1 mV) |
Horizontal System
| Parameter | Value |
|---|---|
| Maximum Real-Time Sampling Rate | 5 GS/s on all 4 channels, interleaved to 10 GS/s on 2 channels |
| Standard Record Length | 10 Mpts per channel (all 4 channels), interleaved to 20 Mpts (2 channels) |
| Time Base Range | 200 ps/div - 1000 s/div |
| Time Base Accuracy | ≤ 5 ppm |
| Maximum Interleaved Sample Rate | 10 GS/s (on 2 channels) |
| Maximum Interleaved Memory Length | 20 Mpts (on 2 channels, standard) |
| Random Interleaved Sampling (RIS) Rate | 200 GS/s |
Trigger System
| Parameter | Value |
|---|---|
| Trigger Sources | Ch 1, Ch 2, Ch 3, Ch 4, External, Line |
| Trigger Modes | Auto, Normal, Single, Stop |
| Trigger Coupling | AC, DC, LFRej, HFRej |
| Standard Trigger Types | Edge, Glitch, Width, Logic Pattern, TV-Trigger (NTSC, PAL, SECAM, HDTV) |
| External Trigger Input Impedance | 1 MΩ || 16 pF |
Acquisition System
| Parameter | Value |
|---|---|
| Acquisition Modes | Real-time, Roll, Sequence (segmented memory up to 10,000 segments) |
| Standard Memory - 4 Channels | 10 Mpts/ch |
| Standard Memory - 2 Channels | 20 Mpts/ch (interleaved) |
| Memory Option L - 4 Channels | 25 Mpts/ch |
| Memory Option L - 2 Channels | 50 Mpts/ch (interleaved) |
| Memory Option VL - 4 Channels | 50 Mpts/ch |
| Memory Option VL - 2 Channels | 100 Mpts/ch (interleaved) |
Processor and Storage
| Parameter | Value |
|---|---|
| Operating System | Windows XP Embedded |
Connectivity and Ports
| Parameter | Value |
|---|---|
| Auxiliary Output | Trigger Enabled/Trigger Out (BNC) |
| Reference Clock I/O | 10 MHz external reference input (BNC) |
| Calibration Output | 1 kHz, 1 V square wave |
Environmental Specifications
| Parameter | Value |
|---|---|
| Storage Temperature Range | -20 °C to +60 °C |
| Operating Humidity Range | 5% to 80% RH (non-condensing) up to +30 °C |
Performance
| Parameter | Value |
|---|---|
| Waveform Update Rate | Up to 1,000,000 waveforms/second (WaveStream mode) |
Computer System
| Parameter | Value |
|---|---|
| Processor | Intel Celeron M 1.3 GHz |
| System Memory | 1 GB RAM |
Triggering
| Parameter | Value |
|---|---|
| Trigger Level Range (Internal) | ±4.1 divisions from center |
| Trigger Level Range (External) | ±400 mV (EXT), ±4 V (EXT/10) |
| External Trigger Max Input Voltage | 50 Ω: 5 Vrms; 1 MΩ: 400 V max (DC + Peak AC ≤ 10 kHz) |
Interfaces
| Parameter | Value |
|---|---|
| USB Ports | 5 x USB 2.0 (1 front, 4 side) |
| LAN Port | 1 x RJ-45 (10/100/1000Base-T Ethernet) |
| External Display Output | 1 x D-Sub 15-pin (SVGA) |
| GPIB Port | Optional (via external GPIB-LAN-AUX adapter) |
Power Requirements
| Parameter | Value |
|---|---|
| Maximum Power Consumption | 340 VA |
Display
| Parameter | Value |
|---|---|
| Display Resolution | 800 × 600 SVGA |
Math & Analysis
| Parameter | Value |
|---|---|
| Standard Math Functions | Sum, Difference, Product, Ratio, FFT (up to 1 Mpts), Absolute Value, Averaging, Derivative, Envelope, Integral, Invert, Reciprocal, Rescale, Roof, Square, Square Root, Zoom |
| Standard Measurements | Amplitude, Area, Base, Delay, Duty Cycle, Fall Time, Frequency, Maximum, Mean, Minimum, Overshoot, Peak-to-Peak, Period, Phase, Rise Time, RMS, Std. Deviation, Top, Width |
Technology
Digital Phosphor / DSO
Applications
Electronic Design, Debugging, and Signal Integrity Analysis