WaveSurfer 3034

The Teledyne LeCroy WaveSurfer 3034 is a 300 MHz, 4-channel digital oscilloscope designed for rapid debug and analysis. Featuring a large 10.1-inch capacitive touchscreen, advanced math capabilities, and extensive toolsets like History Mode and LabNotebook, it delivers exceptional performance and a streamlined user experience.

Embedded Systems Serial Data Analysis Signal Analysis

Specifications

General

Parameter	Value
Interfaces	LAN (10/100/1000Base-T), 4 x USB 2.0 Host, 1 x USB 2.0 Device, HDMI, GPIB (optional via external adapter)
Display	10.1-inch widescreen capacitive touchscreen TFT-LCD, 1024 x 600 resolution
Calibration Interval	1 year

Physical

Parameter	Value
Power Supply	100 to 240 VAC (±10%) at 50/60 Hz (±10%) or 100 to 120 VAC (±10%) at 400 Hz (±10%), Max 150 W (80 W typical)
Operating Temperature	0 °C to +50 °C
Dimensions (W×H×D)	382 mm x 290 mm x 140 mm
Weight	4.81

Vertical System

Parameter	Value
Analog Bandwidth (-3 dB)	300 MHz
Calculated Rise Time (10% to 90%)	1.15 ns (typical)
Number of Input Channels	4 analog channels
Input Coupling	50 Ω: DC, GND; 1 MΩ: AC, DC, GND
Input Impedance	1 MΩ ± 1% \|\| 16 pF, or 50 Ω ± 1%
Input Sensitivity Range (1 MΩ)	1 mV/div to 10 V/div
Input Sensitivity Range (50 Ω)	1 mV/div to 1 V/div
Vertical Resolution	8 bits (up to 11 bits with ERES)
Maximum Input Voltage (1 MΩ)	300 Vrms (CAT II)
Maximum Input Voltage (50 Ω)	5 Vrms
DC Gain Accuracy	±1.5% of full scale (typical)
Hardware Bandwidth Limits	20 MHz

Horizontal System

Parameter	Value
Timebase Range	1 ns/div to 1000 s/div
Timebase Accuracy	±10 ppm

Acquisition System

Parameter	Value
Maximum Real-Time Sample Rate (Interleaved)	4 GS/s
Maximum Real-Time Sample Rate (All Channels)	2 GS/s
Maximum Record Length (Interleaved)	20 Mpts
Maximum Record Length (All Channels)	10 Mpts/ch
Segmented Memory (Maximum Segments)	1,000 segments
Waveform Capture Rate	130,000 wfms/s
Acquisition Modes	Real-Time, Roll, Sequence (Segmented Memory), Average, Peak Detect

Trigger System

Parameter	Value
Trigger Sources	Ch 1 - Ch 4, EXT, EXT/5, Line
Trigger Modes	Auto, Normal, Single, Stop
Trigger Coupling	AC, DC, LF Rej, HF Rej
Trigger Holdoff Range	8 ns to 9.22 s
Standard Trigger Types	Edge, Width, Pattern, TV (NTSC, PAL, SECAM, HDTV), Glitch, Interval, Dropout, Runt, Slew Rate
Trigger Jitter	4 ps rms (typical)
Internal Trigger Range	±4.1 div from center
External Trigger Range	EXT: ±610 mV, EXT/5: ±3.05 V
Trigger Sensitivity (Internal)	0.5 div: DC to 200 MHz, 1.0 div: 200 MHz to 300 MHz
Trigger Sensitivity (External)	0.5 div / 100 mV: DC to 200 MHz, 1.0 div / 200 mV: 200 MHz to 300 MHz

Waveform Measurements and Analysis

Parameter	Value
Automatic Measurements	Up to 6 measurements displayed simultaneously with statistics
Waveform Math Operators	Add, Subtract, Multiply, Divide, FFT, Absolute Value, Average, Derivative, Envelope, Enhanced Resolution (ERES), Floor, Integral, Invert, Reciprocal, Roof, Square, Square Root
FFT Window Types	Von Hann (Hanning), Hamming, Flat Top, Blackman-Harris
History Mode	Waveform playback up to 80,000 waveforms

Display and User Interface

Parameter	Value
Display Size	10.1 inches diagonal
Touchscreen Technology	Capacitive touch

Connectivity and Interfaces

Parameter	Value
USB Host Ports	4 x USB 2.0 (2 front, 2 rear)
USB Device Port	1 x USB 2.0 Type-B (rear)

Environmental and Compliance

Parameter	Value
Storage Temperature Range	-20 °C to +60 °C
Operating Humidity	5% to 90% RH (non-condensing) up to +30 °C; 5% to 50% RH above +30 °C to +50 °C
Operating Altitude	Up to 3,000 m (+30 °C)

Physical Characteristics

Parameter	Value
Form Factor	Benchtop

MSO (Digital Channels) Option

Parameter	Value
MSO Digital Channels	16 digital channels (with optional WS3K-MSO)
MSO Sample Rate	500 MS/s
MSO Record Length	10 MS
MSO Maximum Input Frequency	125 MHz

WaveSource Function Generator Option

Parameter	Value
WaveSource Channels	1 channel (with optional WS3K-FG)
WaveSource Frequency Range	0.1 Hz - 25 MHz
WaveSource Vertical Resolution	14-bit
WaveSource Sample Rate	125 MS/s
WaveSource Standard Waveforms	Sine, Square, Pulse, Ramp, Noise, DC

Auxiliary Measurements

Parameter	Value
Digital Voltmeter	4-digit AC rms, DC, AC+DC rms (requires free registration)
Frequency Counter	5-digit hardware frequency counter

Auxiliary Inputs / Outputs

Parameter	Value
Probe Interface	ProBus (supports active voltage, current and differential probes)
Auxiliary Out / Calibrator	1 kHz, 1 V p-p square wave into >= 100 kOhm
External Trigger Input	1 MOhm \|\| 16 pF; Max input 300 Vrms

Display & Visualization

Parameter	Value
Grid Styles	Auto, Single, Dual, Quad, Octal, XY, Single XY

Connectivity

Parameter	Value
LAN Interface	10/100/1000Base-T RJ-45
External Display Output	DB-15 female connector (VGA, 1024x600 resolution)
LXI Compliance	LXI Class C / LXI Version 1.3
GPIB Interface	Optional via external USB-GPIB adapter

Power

Parameter	Value
Max Power Consumption	150 W

Environmental

Parameter	Value
Vibration	MIL-PRF-28800F Class 3 Random
Shock	MIL-PRF-28800F Class 3 (30g, 11 ms half-sine pulse)

WaveSource Function Generator (Optional)

Parameter	Value
WaveSource Waveform Length	16 kpts

MSO Digital Channels (Optional)

Parameter	Value
Digital Channels Input Impedance	100 kΩ \|\| 8 pF
Digital Channels Threshold Range	-10 V to +10 V
Digital Channels Threshold Selection	TTL, CMOS, ECL, PECL, LVDS, User-Defined
Digital Channels Minimum Detectable Pulse Width	4 ns

Technology

Digital Phosphor Oscilloscope (DPO)

Applications

Electronic Design, Debugging, Embedded Systems Analysis, Protocol Testing