The National Instruments PCI-GPIB is a high-performance plug-and-play GPIB controller interface card for PCs and workstations with PCI expansion slots. Equipped with the NI TNT4882C controller ASIC, it provides standard IEEE 488.1/IEEE 488.2 compatibility and supports the high-speed HS488 transfer protocol.

Specifications

General

ParameterValue
InterfacesPCI (Host), 24-pin GPIB IEEE 488 (External)

Physical

ParameterValue
Power SupplyPCI bus-powered
Operating Temperature0 to 55 °C
Dimensions (W×H×D)134 mm × 107 mm

System & Chassis Architecture

ParameterValue
Host Bus TypePCI
PCI Slot Compatibility3.3 V or 5 V universal PCI slot, 32-bit
PCI Specification CompliancePCI Local Bus Specification Revision 2.2

RF, Electrical & Calibration Performance

ParameterValue
GPIB Standard CompatibilityIEEE 488.1, IEEE 488.2
Maximum Standard Transfer Rate1.5 MB/s
Maximum HS488 Transfer Rate7.7 MB/s
Number of GPIB Ports1
Connector Type24-pin IEEE 488 standard
Maximum Cable Length20 m (or 2 m per device, whichever is less)
Maximum Device ConnectionUp to 14 instruments (total of 15 devices including controller)

Software & Programming

ParameterValue
Driver SupportNI-488.2
Supported Operating SystemsWindows, Linux, macOS
Application Programming InterfacesNI-488.2 API, NI-VISA, LabVIEW, LabWindows/CVI

Environmental Specifications

ParameterValue
Storage Temperature Range-20 to 70 °C
Operating Humidity10% to 90% RH, noncondensing
Storage Humidity5% to 95% RH, noncondensing

Host Interface

ParameterValue
PCI Signaling Voltage3.3 V and 5 V (Universal key)
PCI Bus Width32-bit
PCI Clock Frequency33 MHz

Power Requirements

ParameterValue
Typical Current Draw120 mA (+5 VDC)
Maximum Current Draw180 mA (+5 VDC)

Environmental

ParameterValue
Maximum Altitude2,000 m
Pollution Degree2

Technology

GPIB (IEEE 488)

Applications

Instrument Control and Automation