The Sunrise Telecom Sunset T10 is a handheld T1 transmission test set designed for the installation, troubleshooting, and maintenance of T1 (DS1) circuits and services. Highly portable and rugged, it features a comprehensive suite of transmitter, receiver, and VF testing functions.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | Three Bantam jacks (Tx, Rx, Rx2), RS-232 serial interface |
| Display | 8-line x 21-character backlit graphic LCD |
Physical
| Parameter | Value |
|---|---|
| Power Supply | Internal rechargeable battery pack or external AC power adapter/charger |
| Operating Temperature | 0 to 50 |
| Dimensions (W×H×D) | 100 x 195 x 45 |
| Weight | 0.54 |
Transmitter and Receiver Interfaces
| Parameter | Value |
|---|---|
| Line Rate | 1.544 Mbps |
| Line Coding Formats | AMI, B8ZS |
| Framing Formats | Unframed, SF (D4), ESF, SLC-96 |
| Receiver Input Impedance Options | Terminate (100 Ω), Bridge (>1000 Ω), Monitor (100 Ω with 20 dB gain) |
| Line Build-Out (LBO) | 0 dB, -7.5 dB, -15 dB, -22.5 dB |
| DSX-1 Equalization Range | 0 to 133 ft, 133 to 266 ft, 266 to 399 ft, 399 to 533 ft, 533 to 655 ft |
| Frequency Offset Generation | Up to ±150 ppm |
Testing and Measurement Capabilities
| Parameter | Value |
|---|---|
| Bit Error Rate Testing (BERT) Patterns | QRSS, 511, 2047, 2^15-1, 2^20-1, 2^23-1, All Ones, All Zeros, 1:7, 2:8, 3 in 24, MIN/MAX, user-programmable |
| Error Insertion Types | Bit, BPV, Frame, CRC-6, Excessive Zeros |
| Error Insertion Rates | Single, Constant (10^-3 to 10^-7), Burst |
| Alarm Generation Types | AIS (Blue), Yellow (RAI), Idle |
| Alarm Detection Types | LOS, LOF, AIS, Yellow (RAI), Idle |
| Signal Level Measurement Range | +6 to -35 dBdsx |
| Frequency Measurement Accuracy | 1,544,000 Hz with 1 Hz resolution |
| VF Channel Access | Single-channel drop and insert to VF port, speaker, or headphone |
| VF Level and Frequency Measurement | Level: +3 to -40 dBm; Frequency: 200 Hz to 4000 Hz |
| Round Trip Delay Measurement | Up to 2 seconds with 1 ms resolution |
| Fractional T1 Testing Capabilities | Nx56 kbps or Nx64 kbps (N=1 to 24) contiguous or non-contiguous |
| Loopback Codes and Control Protocols | CSU, NIU, HDSL, Westell, Teltrend, custom user programmable |
System, UI and Connectivity
| Parameter | Value |
|---|---|
| VF Talk/Listen | Built-in microphone, speaker, and headset jack |
Power and Battery
| Parameter | Value |
|---|---|
| Battery Operating Lifetime | Up to 4 hours |
Physical and Environmental
| Parameter | Value |
|---|---|
| Storage Temperature | -20°C to 70°C |
| Relative Humidity Range | 5% to 90% non-condensing |
Transmitter
| Parameter | Value |
|---|---|
| Transmitter Clock Sources | Internal, Loop (from Rx1), External (from Rx2) |
| Internal Clock Accuracy | ±5 ppm |
Connectivity
| Parameter | Value |
|---|---|
| Serial Interface Port | 8-pin mini-DIN (RS-232C, up to 19.2 kbps) |
| Test Interface Connectors | Three Bantam jacks (TX, RX, RX2) |
| Serial Interface Connector | 8-pin mini-DIN (RS-232) |
Memory & Storage
| Parameter | Value |
|---|---|
| Test Result Storage | Up to 10 test results |
| User Profiles Storage | Up to 10 user-defined configurations |
User Interface
| Parameter | Value |
|---|---|
| LED Status Indicators | 16 LEDs for real-time status and alarm history |
Measurement & Analysis
| Parameter | Value |
|---|---|
| Performance Analysis | ITU-T G.821 calculations (ES, SES, UAS, EFS, and CSES) |
Power Specifications
| Parameter | Value |
|---|---|
| Battery Type | Rechargeable NiMH battery pack |
| AC Charger Input | 100 - 240 VAC, 50/60 Hz |
Standards Compliance
| Parameter | Value |
|---|---|
| T1 Pulse Template Compliance | ANSI T1.102-1993, ITU-T G.703 |
| Performance Analysis Standards | ITU-T G.821, G.826, M.2100 |
Technology
T1 (DS1) Transmission
Applications
Telecommunications troubleshooting, installation, and maintenance