SpecAtlasHub

P6205

TektronixFET

The Tektronix P6205 is an active 10X FET oscilloscope probe designed for high-frequency measurements up to 750 MHz with minimal circuit loading. Utilizing a TEKPROBE Level 2 interface, it communicates directly with compatible Tektronix oscilloscopes, which power the probe automatically and adjust scaling and termination settings accordingly.

OscilloscopesRF and MicrowaveSignal Integrity

Specifications

General

ParameterValue
InterfacesTEKPROBE Level 2 interface
Warm-up Time20 minutes

Physical

ParameterValue
Power SupplyPowered directly from compatible host instruments via TEKPROBE BNC interface
Operating Temperature0 °C to +50 °C
Weight0.26 kg (including cable and interface box)

Electrical Specifications

ParameterValue
Bandwidth (-3 dB)DC to 750 MHz
Rise Time≤465 ps
Attenuation Ratio10X
Input Resistance1 MΩ
Input Capacitance2 pF
Linear Input Range±10 V
Linearity Error≤1.5% over the dynamic range of -10 V to +10 V
Propagation Delay6.72 ns ±200 ps (measured at waveform 50% points)
DC Thermal Drift≤100 µV/°C
DC Thermal Drift (on screen)≤1 mV/°C
Output Load Requirement50 Ω ±0.5%
Maximum Non-Destructive Input Voltage40 VDC + peak AC

Physical & Mechanical

ParameterValue
Probe Tip ContactGold-plated replaceable probe tips

Safety & Compliance

ParameterValue
Safety CertificationsUL Listed (UL 1244)

Standard Accessories

ParameterValue
Standard Accessories IncludedRetractable-hook tip, IC protector tip, ground sleeve tip cover, long ground leads, low-inductance spring-tip ground contact, retractable KlipChip

Environmental

ParameterValue
Storage Temperature-55 °C to +75 °C
Operating AltitudeUp to 4,570 m (15,000 ft)
Storage AltitudeUp to 15,240 m (50,000 ft)

Physical Characteristics

ParameterValue
Cable Length1.5 m

Performance

ParameterValue
DC Attenuation Accuracy±1.5% (probe only)

Inputs & Outputs

ParameterValue
Input CouplingDC

Technology

Active FET

Applications

High-frequency oscilloscope signal probing