The Tektronix P6245 is an active FET oscilloscope probe designed for high-speed signal acquisition with minimal device-under-test (DUT) loading. Delivering a bandwidth of 1.5 GHz and a fast rise time of less than 250 ps, it offers an ideal solution for testing modern digital system designs, including CMOS, BiCMOS, ECL, GaAs, and TTL logic. Equipped with the TEKPROBE BNC interface, the probe connects directly to compatible Tektronix oscilloscopes, drawing power directly from the host instrument without requiring external power supplies or cables.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | TEKPROBE BNC |
Physical
| Parameter | Value |
|---|---|
| Power Supply | Powered directly by host instrument via TEKPROBE BNC |
| Operating Temperature | 0 °C to +50 °C |
Electrical Performance
| Parameter | Value |
|---|---|
| Bandwidth | ≥1.5 GHz (probe only) |
| Rise Time | <250 ps |
| Attenuation Ratio | 10X |
| DC Input Resistance | 1 MΩ |
| Input Capacitance | ≤1 pF |
| Linear Dynamic Range | ±8 V |
| DC Offset Range | ±10 V |
| Maximum Non-Destructive Input Voltage | ±15 V (DC + peak AC) |
| Propagation Delay | 5.3 ns |
| Logic Compatibility | CMOS, BiCMOS, ECL, GaAs, TTL |
Interface & Compatibility
| Parameter | Value |
|---|---|
| Compatible Oscilloscope Series | TDS500, TDS600, TDS700, TDS3000, TDS5000, TDS6000, TDS7000, CSA7000 |
Physical & Mechanical Properties
| Parameter | Value |
|---|---|
| Cable Length | 1.3 m |
| SMD Pitch Compatibility | Down to 0.5 mm |
Technology
Active FET
Applications
High-speed digital system design, SMD testing, and logic measurements (CMOS, BiCMOS, ECL, GaAs, TTL)