SpecAtlasHub

TLA5204 Opt. 7S

Tektronix*misc

The Tektronix TLA5204 Opt. 7S is a high-performance 136-channel logic analyzer featuring 125 ps MagniVu™ timing resolution, 235 MHz state acquisition, and a built-in touch screen display running under Windows 7.

Embedded SystemsLogic Analysis

Specifications

General

ParameterValue
InterfacesUSB 2.0 (4 ports), Gigabit LAN (10/100/1000 Base-T), GPIB (IEEE 488.2), RS-232, Parallel, VGA, PS/2
Display10.4-inch active-matrix color TFT LCD, 1024 × 768 (XGA) resolution, with touch screen (Opt. 18)
Calibration Interval1 year
Warm-up Time30 minutes

Physical

ParameterValue
Power Supply90 to 250 VAC, 45 to 66 Hz, 300 W maximum
Operating Temperature5 °C to 50 °C
Dimensions (W×H×D)438 mm × 285 mm × 374 mm
Weight12 kg (26.5 lb.)
Cooling Clearance51 mm (2 in.) left and right sides, 76 mm (3 in.) rear

Acquisition Channels

ParameterValue
Total Channels136
Clock Channels4
Qualifier Channels4
Data Channels128

Timing Acquisition

ParameterValue
MagniVu™ Timing Resolution125 ps (8 GHz)
MagniVu™ Record Length16 Kb per channel
Max Timing Sample Rate (Quarter Channel)2.0 GHz (500 ps)
Max Timing Sample Rate (Half Channel)1.0 GHz (1 ns)
Max Timing Sample Rate (Full Channel)500 MHz (2 ns)

State Acquisition

ParameterValue
Max State Clock Rate235 MHz
Max State Data Rate235 Mb/s
State Setup/Hold Window Size1.5 ns
State Setup/Hold Range-1.0 ns to +4.5 ns
Minimum State Clock Pulse Width1.5 ns

Memory Depth Options

ParameterValue
Memory Depth Options2 Mb (Opt. 1S) / 8 Mb (Opt. 2S) / 16 Mb (Opt. 3S) / 32 Mb (Opt. 4S) per channel

Trigger System

ParameterValue
Trigger States16
Word Recognizers16 (all-channel wide)
Transition Recognizers4
Range Recognizers4
Counter/Timers2 (32-bit each)
Trigger OutBNC connector (TTL compatible, 50 Ω)
Trigger InBNC connector

Threshold & Signal Input

ParameterValue
Threshold Range-2.0 V to +4.5 V
Threshold Resolution10 mV
Minimum Input Signal Swing500 mV p-p

Computer System

ParameterValue
Operating SystemWindows 7 (with Opt. 7S)
Processor ClassIntel Pentium M
System Memory (RAM)512 MB (Standard) / 1 GB (Maximum)
Storage Capacity≥80 GB Hard Disk Drive (HDD)

Probing System

ParameterValue
Recommended ProbesP6417, P6418, P6419, P6434
Probe Input Impedance20 kΩ in parallel with 2 pF (P6417/P6418/P6419)
Probe Input Dynamic Range-2.0 V to +4.5 V

Interfaces

ParameterValue
USB Ports4× USB 2.0 (2 front, 2 rear)
LAN Interface10/100/1000 Base-T (Gigabit Ethernet)
GPIB InterfaceIEEE 488.2
Serial PortDB-9 RS-232
Parallel PortDB-25
PS/2 Ports2× (1 Keyboard, 1 Mouse)
External Video OutputDB-15 VGA
Audio PortsMic input, Line input, Line output (3.5 mm jacks)

External Connectivity

ParameterValue
iView™ Oscilloscope SupportTektronix TDS3000, TDS5000, TDS6000, TDS7000, DPO4000, DPO7000, DPO70000 series

Standards & Compliance

ParameterValue
Safety StandardsUL61010B-1, CAN/CSA-C22.2 No. 1010.1, EN61010-1
EMC ComplianceEN61326, FCC Class A

Environmental

ParameterValue
Storage Temperature-20 °C to +60 °C
Operating Humidity20% to 80% RH, non-condensing
Storage Humidity5% to 90% RH, non-condensing
Operating AltitudeUp to 3,000 m (10,000 ft.)
Storage AltitudeUp to 12,190 m (40,000 ft.)
Operating Vibration0.31 GRMS, 5 Hz to 500 Hz
Non-operating Vibration2.46 GRMS, 5 Hz to 500 Hz
Non-operating Shock510 m/s² (52 G), half-sine, 11 ms
Operating Shock290 m/s² (30 g) half-sine, 11 ms duration

Electrical

ParameterValue
Power Consumption (Maximum)300 W
AC Input Voltage Range90 VAC to 250 VAC
AC Input Frequency Range45 Hz to 66 Hz

Display

ParameterValue
Display Size10.4 in.
Display Resolution800 × 600 pixels
Display TypeActive-matrix color TFT LCD

Triggering

ParameterValue
Trigger Input to Trigger Output Latency45 ns (typical)

Acquisition

ParameterValue
Minimum Detectable Glitch1.25 ns

Inputs & Outputs

ParameterValue
Trigger Input LevelTTL compatible

Technology

Logic Analysis

Applications

Digital system debugging, hardware/software integration, state and timing logic analysis