The Keithley Model 3390 is a high-performance 50 MHz arbitrary waveform and function generator featuring a 14-bit vertical resolution, 256k-point waveform memory, and LXI Class C compliance. Designed to deliver superior signal integrity with fast 5 ns rise and fall times, it provides versatile standard and arbitrary waveform generation along with AM, FM, PM, FSK, and PWM modulation. Ideal for precision testing, it includes standard USB, LAN, and GPIB interfaces.

Specifications

General

ParameterValue
InterfacesUSB (Type B), LAN (LXI Class C), GPIB
Display256 × 64 Graphical LCD
Warm-up Time1 hour

Physical

ParameterValue
Power Supply100 V to 240 V AC (±10%), 50/60 Hz; 100 V to 120 V AC (±10%), 400 Hz; 50 VA max
Operating Temperature0 to 50 °C
Dimensions (W×H×D)224 mm × 104 mm × 370 mm
Weight3.18 kg
Rackmount Size2U half-rack

Channel Characteristics

ParameterValue
Number of Channels1
Operating ModesContinuous, Modulation, Sweep, Burst

Waveform Generation

ParameterValue
Standard WaveformsSine, Square, Ramp, Triangle, Pulse, Noise, DC
Arbitrary Waveform Memory256k points
Vertical Resolution14 bits
Sampling Rate125 MSa/s
Minimum Arbitrary Waveform Length8 points
Maximum Arbitrary Waveform Length256k points
Non-Volatile Memory Capacity4 waveforms (up to 256k points each)

Frequency Specifications

ParameterValue
Sine Frequency Range1 µHz to 50 MHz
Square Frequency Range1 µHz to 25 MHz
Pulse Frequency Range500 µHz to 25 MHz
Ramp/Triangle Frequency Range1 µHz to 200 kHz
Noise Bandwidth20 MHz
Arbitrary Waveform Frequency Range1 µHz to 10 MHz
Frequency Resolution1 µHz
Frequency Accuracy±10 ppm (90 days), ±20 ppm (1 year)

Sine Wave Distortion and Purity

ParameterValue
Total Harmonic Distortion (THD)<0.2% (DC to 20 kHz, 1 Vp-p)
Spurious Noise (Non-Harmonic)<-70 dBc (DC to 1 MHz)
Phase Noise<-115 dBc/Hz (at 10 MHz, 10 kHz offset)

Pulse & Square Wave Characteristics

ParameterValue
Rise/Fall Time< 10 ns
Overshoot<5%
Duty Cycle Range20% to 80% (up to 25 MHz)
Pulse Width Range20 ns to 2000 s
Pulse Width Resolution10 ps or 5 digits
Pulse Jitter (RMS)<100 ps

Amplitude and Output Characteristics

ParameterValue
Amplitude Range (into 50 Ω)10 mVp-p to 10 Vp-p
Amplitude Range (into Open Circuit)20 mVp-p to 20 Vp-p
Amplitude Accuracy±(1% of setting + 1 mVp-p) at 1 kHz
Amplitude UnitsVp-p, Vrms, dBm
DC Offset Range (into 50 Ω)±5 V
DC Offset Range (into Open Circuit)±10 V
DC Offset Accuracy±(1% of setting + 5 mV + 0.5% of amplitude)
Output Impedance50 Ω typical
Output ProtectionShort-circuit protected
Main Output Connector TypeBNC (Front Panel)

Modulation, Sweep, and Burst

ParameterValue
Modulation TypesAM, FM, PM, FSK, PWM
Internal Modulation SourcesSine, Square, Ramp, Arbitrary
AM Modulation Depth0.0% to 120.0%
FM Deviation Range1 µHz to 25 MHz
PM Phase Deviation Range0.0° to 360.0°
FSK Keying Rate2 mHz to 1 MHz
PWM Duty Cycle Deviation0% to 100% of pulse width
Sweep TypeLinear or Logarithmic
Sweep Time Range1 ms to 500 s
Burst TypeTriggered (Counted), Gated
Burst Count Range1 to 50,000 cycles, or Infinite

Clock, Trigger, and Synchronization

ParameterValue
Internal Timebase Reference Accuracy±10 ppm
External Reference Input Frequency Range10 MHz ± 512 Hz
External Reference Input Level100 mVp-p to 5 Vp-p
External Reference Output Frequency10 MHz
External Reference Output Level632 mVp-p (0 dBm) into 50 Ω
Trigger Input Voltage LevelTTL-compatible
Trigger Input Impedance10 kΩ typical
Trigger Output Voltage LevelTTL-compatible
Trigger Output Pulse Width>400 ns
Sync Output LevelTTL-compatible
Sync Output Impedance50 Ω nominal

Connectivity and Programming

ParameterValue
USB Interface TypeUSB 2.0 Device Port (Type B)
LAN Interface / LXI ComplianceLXI Class C (10/100 Base-T)
GPIB InterfaceIEEE-488.2 GPIB Standard
Programming Command LanguageSCPI-1992, IEEE-488.2
Software DriversIVI-COM, LabVIEW
External Modulation Input ConnectorBNC (Rear Panel)
External Modulation Input Level±5 V full scale
External Modulation Input Impedance10 kΩ
Waveform Creation SoftwareKiWAVE (included)

Physical and Environmental

ParameterValue
Display Resolution256 × 64 pixels
Power Supply Frequency50/60 Hz, 400 Hz
Power Consumption50 VA maximum
Storage Temperature Range-30 °C to 70 °C
Operating Humidity RangeMax 80% R.H. up to 30 °C, non-condensing

Compliance and Standards

ParameterValue
Safety CertificatesConforms to European Union Low Voltage Directive, IEC 61010-1
EMC Compliance StandardsConforms to European Union EMC Directive, EN 61326-1
RoHS Directive ComplianceCompliant
Calibration Interval1 year

Performance

ParameterValue
Amplitude Flatness (<10 MHz)±0.1 dB (relative to 1 kHz, 1 Vpp)
Amplitude Flatness (10 MHz to 50 MHz)±0.15 dB (relative to 1 kHz, 1 Vpp)
Ramp Linearity< 0.1% of peak output (typical, at 1 kHz, 1 Vpp, 100% symmetry)
Ramp Symmetry Range0.0% to 100.0%
Amplitude Resolution0.1 mV or 4 digits
DC Offset Resolution1 mV or 4 digits

Timebase & Reference

ParameterValue
External Reference Input Impedance1 kΩ (typical, AC coupled)
External Reference Output Impedance50 Ω (typical, AC coupled)

Sweep & Burst

ParameterValue
Sweep DirectionUp / Down

Trigger

ParameterValue
Trigger Input SlopeRising or Falling (selectable)
Trigger Input Latency< 100 ns (typical)

Outputs

ParameterValue
Output Isolation42 Vpk maximum to earth

Environmental

ParameterValue
Operating Altitudeup to 3,000 m
Storage Altitudeup to 15,240 m

Spectral Purity

ParameterValue
Harmonic Distortion (DC to 1 MHz)<-70 dBc
Harmonic Distortion (1 MHz to 5 MHz)<-65 dBc
Harmonic Distortion (5 MHz to 50 MHz)<-40 dBc
Phase Noise (10 MHz carrier, 10 kHz offset)<-115 dBc/Hz (typical)

Phase

ParameterValue
Phase Offset Range-360.00° to +360.00°
Phase Offset Resolution0.001°

Modulation

ParameterValue
Internal Modulation Frequency Range2 mHz to 20 kHz
FSK Keying Rate Range (Internal)2 mHz to 100 kHz

Burst

ParameterValue
Burst Start Phase Range-360.0° to +360.0°
Burst Start Phase Resolution0.1°

Pattern Mode

ParameterValue
Pattern Length2 to 256,000 points
Pattern Output Rate1 µHz to 50 MHz

Arbitrary Waveform

ParameterValue
Non-Volatile Arbitrary Waveform Storage4 waveforms

Trigger Input

ParameterValue
Trigger Input Minimum Pulse Width100 ns

Technology

Direct Digital Synthesis (DDS)

Applications

Signal generation, educational labs, electronic design, and sensor simulation

Looking for the Keithley 3390?

Tell us what you need. We're building a network of equipment dealers and will get back to you if we can help source it — no obligation.

Selling this kind of equipment? Sell with us