6030A

Keysight Technologies (Agilent HP)Agilent HP

The Keysight Agilent HP 6030A is a 1200 W, single-output, autoranging programmable DC power supply designed for automatic test systems. It provides high efficiency, GPIB programmability, analog control of output voltage and current, and extensive built-in measurements in a compact 3U rack-mount form factor.

Automated Test Equipment DC Power Supply Programmable Power Supply

Specifications

General

Parameter	Value
Interfaces	GPIB (HP-IB), Analog Programming/Monitoring
Display	Dual 4-digit LED displays (voltage and current)
Recommended Calibration Interval	1 year

Physical

Parameter	Value
Power Supply	120 VAC nominal (standard); 100 / 220 / 240 VAC options, 47-63 Hz, 2800 VA max
Operating Temperature	0 to 55 °C
Dimensions (W×H×D)	425.5 mm × 132.6 mm × 503.7 mm
Weight	16.3

Output Ratings and Capabilities

Parameter	Value
Number of Channels	1
Rated Output Voltage	0 to 200 V
Rated Output Current	0 to 17 A
Rated Output Power	1000 W

Load and Line Regulation

Parameter	Value
Voltage Load Regulation	0.01% + 15 mV
Current Load Regulation	0.01% + 10 mA
Voltage Line Regulation	0.01% + 10 mV
Current Line Regulation	0.01% + 10 mA

Ripple and Noise

Parameter	Value
Constant Voltage Ripple and Noise (Vrms)	22 mV
Constant Voltage Ripple and Noise (Vp-p)	50 mV
Constant Current Ripple and Noise (Irms)	15 mA

Programming Accuracy and Resolution

Parameter	Value
Voltage Programming Accuracy	0.035% + 145 mV
Current Programming Accuracy	0.2% + 25 mA
Voltage Programming Resolution	50 mV
Current Programming Resolution	4.25 mA
OVP Programming Accuracy	1.6% + 1.2 V
OVP Programming Resolution	1.2 V

Readback Accuracy and Resolution

Parameter	Value
Voltage Readback Accuracy	0.08% + 80 mV
Current Readback Accuracy	0.36% + 15 mA
Voltage Readback Resolution	50 mV
Current Readback Resolution	5 mA

Protection Features

Parameter	Value
Over-Voltage Protection (OVP) Range	2.4 to 230 V

System Connectivity and Interfaces

Parameter	Value
GPIB (IEEE-488) Interface	Standard (HP-IB)
Analog Programming and Monitoring	0 to 5 V, 0 to 10 V, 0 to 5 kΩ, or 0 to 10 kΩ control options
Remote Sensing Compensation Voltage	Up to 2 V drop per load lead

AC Input Specifications

Parameter	Value
AC Input Voltage Options	100 VAC / 120 VAC / 220 VAC / 240 VAC (factory-configured options)
AC Input Frequency Range	47 to 63 Hz

Physical and Mechanical

Parameter	Value
Form Factor	3U rack-mount
Cooling System Design	Forced air cooling with internal fan, side/bottom intake and rear exhaust
Shipping Weight	21.8 kg

Environmental and Standards

Parameter	Value
Storage Temperature Range	-40 to +75 °C

Power Specifications

Parameter	Value
AC Input Power (VA)	2800 VA
AC Input Current	24 A @ 120 VAC, 14 A @ 200 VAC, 13 A @ 220 VAC, 12 A @ 240 VAC

Performance

Parameter	Value
Temperature Coefficient (Voltage)	0.01% + 3 mV per °C
Temperature Coefficient (Current)	0.02% + 0.5 mA per °C
Command Processing Time	15 ms (average time for output to change after receipt of GPIB command)
Output Rise Time (Full Load)	100 ms
Output Rise Time (No Load)	100 ms
Output Fall Time (Full Load)	250 ms
Output Fall Time (No Load)	6 s
Transient Recovery Time	1 ms to recover within 150 mV of nominal output voltage following a load change

Safety & Isolation

Parameter	Value
Maximum Isolation Voltage	±550 VDC

Environmental

Parameter	Value
Operating Altitude	Up to 2000 m
Operating Humidity	Up to 80% RH (non-condensing)

Stability

Parameter	Value
Output Voltage Drift	0.03% + 5 mV (over 8 hours)
Output Current Drift	0.03% + 3 mA (over 8 hours)

Capability

Parameter	Value
Series Connection Limit	Up to 2 units
Parallel Connection Limit	Up to 3 units

Inputs & Outputs

Parameter	Value
Analog Control Input Ranges	0 to 5 V (voltage control) or 0 to 4 kΩ (resistance control)
Rear Panel Connections	GPIB (IEEE-488) connector, 15-pin analog control terminal block (J1), output bus bars

Technology

Switch-mode / Autoranging

Applications

Automated test equipment (ATE), system power, industrial testing