The Keysight E5092A is a configurable multiport test set designed for use with the E5071C ENA vector network analyzer. It provides a highly flexible solution for multiport measurements up to 10 ports or 22 ports, operating over a wide frequency range from 50 MHz to 20 GHz. With integrated DC control sources, it is optimized for testing complex multiport devices such as front-end modules and switches.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | USB (Type-B, for control from E5071C VNA) |
| Display | Status LED indicators (no integrated screen) |
Physical
| Parameter | Value |
|---|---|
| Operating Temperature | 5 °C to 40 °C |
| Dimensions (W×H×D) | 426 mm × 132 mm × 341 mm |
| Weight | 9 kg |
RF and Signal Analysis
| Parameter | Value |
|---|---|
| Frequency Range | 50 MHz to 20 GHz |
| Nominal Impedance | 50 Ω |
Physical Interfaces and Connections
| Parameter | Value |
|---|---|
| RF Input/Output Connector Type | SMA female |
Port and Switch Configuration
| Parameter | Value |
|---|---|
| Maximum Multiport Capability (Single Test Set) | Up to 10-port measurement (with 4-port ENA) |
| Maximum Multiport Capability (Dual Test Set) | Up to 22-port measurement (with two E5092As and 4-port ENA) |
DC Control Sources
| Parameter | Value |
|---|---|
| Internal DC Sources | 4 channels |
| DC Source Voltage Range | -5.2 V to +5.2 V |
| DC Source Voltage Resolution | 10 mV |
| DC Source Maximum Current | 150 mA (per channel) |
Software and Automation
| Parameter | Value |
|---|---|
| Compatible Analyzer Series | Keysight E5071C ENA Vector Network Analyzer |
Environmental and Compliance
| Parameter | Value |
|---|---|
| Storage Temperature Range | -20 °C to +60 °C |
RF Specifications
| Parameter | Value |
|---|---|
| Maximum RF Input Level | +20 dBm |
Environmental
| Parameter | Value |
|---|---|
| Operating Altitude | Up to 2,000 m |
| Storage Altitude | Up to 4,572 m |
| Operating Humidity | 20% to 80% RH (non-condensing) |
| Non-Operating Humidity | 10% to 90% RH (non-condensing) |
Performance
| Parameter | Value |
|---|---|
| RF Switch Type | Electromechanical |
| Warm-up Time | 30 minutes |
Inputs & Outputs
| Parameter | Value |
|---|---|
| DC Control Output Connectors | 4 x BNC female |
| USB Control Interface | USB Type-B female (USB 2.0 compliant) |
Technology
Multiport VNA Extension
Applications
Multiport RF Device Characterization