The Keysight Agilent E8267D PSG vector signal generator is an integrated microwave vector signal generator with I/Q modulation capabilities up to 44 GHz, featuring an advanced wideband internal baseband generator and flexible modulation options.

Specifications

Frequency

ParameterValue
Minimum Frequency250 kHz
Maximum Frequency44 GHz (option dependent)
Frequency Resolution0.001 Hz
Frequency Switching Speed< 5 ms (list mode, typical)
Internal Reference Aging Rate1 × 10^-7 / year

Output

ParameterValue
Maximum Output Power+22 dBm (typical at 20 GHz)
Phase Noise-115 dBc/Hz at 10 kHz offset, 10 GHz carrier (typical)

Modulation

ParameterValue
ModulationAM, FM, PM, FSK, MSK, PSK, QAM, Pulse, Custom I/Q
Sweep ModesStep, List, Ramp (frequency and power)
Internal Baseband Generator Sample Rate (Opt 001/002)100 MSa/s
Internal Baseband Generator Memory (Opt 001/002)1 MSa (standard)
Internal Baseband Generator Vertical Resolution (Opt 001/002)14 bits
Carrier Leakage (Internal Baseband Generator, Mod OFF)< -50 dBc (f < 1 GHz), < -40 dBc (f ">= 1 GHz")
I/Q Gain Balance (Internal Baseband Generator)< 0.2 dB
Quadrature Error (Internal Baseband Generator)< 0.2 degrees
Pulse Modulation Minimum Pulse Width20 ns

General

ParameterValue
Interfaces10BaseT LAN, GPIB
DisplayColor LCD
Warm-up Time30 minutes to warranted specifications

Physical

ParameterValue
Power Supply100-240 VAC, 50/60 Hz
Dimensions (W×H×D)425.5 mm × 221.5 mm × 559 mm
Weight27 kg
Rack Mount Compatibility5U

Frequency Specifications

ParameterValue
Frequency Range Options250 kHz to 20 GHz, 250 kHz to 31.8 GHz, 250 kHz to 44 GHz

I/Q Modulation and Internal Baseband Generator

ParameterValue
Internal Baseband Generator RF Modulation Bandwidth80 MHz
External I/Q RF Modulation Bandwidth (Standard)160 MHz
External I/Q RF Modulation Bandwidth (Maximum)2 GHz
Baseband Generator CapabilitiesArbitrary I/Q waveform playback, Real-time I/Q symbol generation
External I/Q Waveform Generator CompatibilityAgilent N6030A Arbitrary Waveform Generator
External AWG I/Q Waveform Simulation BandwidthUp to 1 GHz RF bandwidth (with N6030A)

Output Power Specifications

ParameterValue
Output Power (typical at 40 GHz)+18 dBm
Output Level AccuracyRefer to quantitative specifications (e.g., ±X dB).

Connectivity and Interfaces

ParameterValue
Remote Control ProtocolSCPI, IVI-COM drivers
External ControlPSA Series spectrum analyzer (with external source control option)

General Specifications

ParameterValue
Warranty1 year
Code CompatibilityCompletely code compatible with previous PSG signal generators

Ordering Information and Options

ParameterValue
Signal Creation SoftwareRadar test signals, Multitone, Noise power ratio, Custom modulation

RF Output

ParameterValue
RF Output Impedance50 Ω
Reverse Power Protection50 W (no Option 1E1, attenuator out); 20 dBm (with Option 1E1)
Harmonics (f < 20 GHz, +10 dBm)< -20 dBc (warranted)
Non-harmonic Spurious (f < 1 GHz)< -70 dBc
Non-harmonic Spurious (f > 1 GHz, carriers > 250 kHz offset)< -65 dBc
Output VSWR (attenuator ≥ 10 dB)< 1.5:1
RF Output Power Flatness (Attenuator ">= 10 dB")±0.9 dB (up to 20 GHz), ±1.2 dB (up to 31.8 GHz), ±1.5 dB (up to 40 GHz), ±2.0 dB (up to 67 GHz, frequency-option dependent)
RF Output Power Resolution0.01 dB

AM Modulation

ParameterValue
AM Modulation Depth0 to 100%
AM Distortion (1 kHz, 30% AM)< 1.5% (f < 10 GHz)

FM Modulation

ParameterValue
FM Deviation (f < 2 GHz)Up to 8 MHz (typical)

Pulse Modulation

ParameterValue
Pulse Modulation Rise/Fall Time< 15 ns (typical)
Pulse Modulation On/Off Ratio> 80 dB (typical)

Connectors

ParameterValue
RF Output ConnectorType N (f) up to 20 GHz, 2.4 mm (m) above 20 GHz
Reference Input/Output ConnectorsBNC (f)
External I/Q Inputs ConnectorsBNC (f)
External Modulation Inputs ConnectorsBNC (f)
GPIB Interface ConnectorIEEE-488 (24-pin)
LAN Interface ConnectorRJ-45
USB Interface ConnectorUSB Type-A, USB Type-B
Video OutputVGA, DVI-D

Environmental

ParameterValue
Operating Temperature Range0 to 55 °C
Storage Temperature Range-40 to 70 °C
HumidityUp to 95% RH, non-condensing
Operating AltitudeUp to 4,600 m (15,000 ft)

Compliance

ParameterValue
Safety ComplianceIEC/EN 61010-1
EMC ComplianceIEC/EN 61326-1, CISPR 11 Group 1 Class A

Connectivity

ParameterValue
External Reference Input Level-10 dBm to +20 dBm
External Reference Output Level0 dBm nominal
LAN Interface Standard100Base-T
USB Interface StandardUSB 2.0
Trigger Input Signal TypeTTL compatible
Trigger Output Signal TypeTTL compatible
Video Output TypeVGA compatible

Technology

Vector Signal Generation

Applications

Aerospace, Defense, Satellite Communications, Broadband Wireless, Distortion Test, Baseband Coding Algorithm Development, Digital Microwave Transceiver Design Verification