The Keysight Agilent E8364A is a high-performance PNA series vector network analyzer designed for microwave component testing up to 50 GHz. It features two measurement ports, a built-in synthesized source, and a highly configurable test set to deliver high dynamic range and fast sweep speeds for accurate characterization of active and passive devices.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | GPIB, LAN, USB, VGA, Parallel, Serial |
| Display | 8.4-inch color LCD |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 100 to 240 VAC (±10%), 47 to 63 Hz, 350 W maximum |
| Operating Temperature | 5 °C to +40 °C |
| Dimensions (W×H×D) | 425 mm × 244 mm × 498 mm |
| Weight | 27 |
Frequency & Power
| Parameter | Value |
|---|---|
| Frequency Range | 45 MHz to 50 GHz |
| Frequency Resolution | 1 Hz |
Hardware & System
| Parameter | Value |
|---|---|
| Number of Test Ports | 2 |
| Test Port Impedance | 50 ohms |
| Test Port Connector Type | 2.4 mm (male) |
| Internal Operating System | Windows |
Measurement Speed & Range
| Parameter | Value |
|---|---|
| Number of Measurement Points | 1 to 16,001 (user selectable) |
| Sweep Types | Linear, Log, Segment, Power |
Receiver Performance
| Parameter | Value |
|---|---|
| System Dynamic Range | 111 dB @ 50 GHz (typical) |
General Specifications
| Parameter | Value |
|---|---|
| Recommended Calibration Cycle | 1 year |
Performance
| Parameter | Value |
|---|---|
| Trace Noise (Magnitude) | < 0.006 dB RMS (45 MHz to 45 GHz, 1 kHz IF bandwidth) |
| Trace Noise (Phase) | < 0.05° RMS (45 MHz to 45 GHz, 1 kHz IF bandwidth) |
| IF Bandwidth Range | 1 Hz to 40 kHz |
| Test Port Damage Level | +30 dBm or 40 VDC |
| Frequency Aging Rate | ±1.0 ppm/year |
| Frequency Temperature Stability | ±0.05 ppm/°C |
| Maximum Traces per Channel | 16 |
| Measurement S-Parameters | S11, S12, S21, S22 |
Environmental
| Parameter | Value |
|---|---|
| Storage Temperature Range | -40 °C to +70 °C |
| Operating Humidity Range | 10% to 90% non-condensing |
Compliance
| Parameter | Value |
|---|---|
| EMC Compliance | Complies with European EMC Directive 89/336/EEC (EN 61326) |
| Safety Compliance | Complies with European Low Voltage Directive 73/23/EEC (EN 61010-1) |
Receiver
| Parameter | Value |
|---|---|
| Number of Receivers | 4 |
Source
| Parameter | Value |
|---|---|
| Source Power Resolution | 0.01 dB |
| Maximum Leveled Source Power (45 GHz to 50 GHz) | -5 dBm (spec) / +2 dBm (typical) |
Source Options
| Parameter | Value |
|---|---|
| Source Attenuators | 60 dB in 10 dB steps (with Option UNL) |
Receiver Options
| Parameter | Value |
|---|---|
| Receiver Attenuators | 35 dB in 5 dB steps (with Option 016) |
Rear Panel I/O
| Parameter | Value |
|---|---|
| 10 MHz Reference Input | BNC female, 10 MHz ± 1 ppm (typical) |
| 10 MHz Reference Output | BNC female, 10 MHz, 0 dBm ± 3 dB |
| External Trigger Input | BNC female, TTL compatible |
| External Trigger Output | BNC female, TTL compatible |
| Auxiliary Analog Inputs | Four BNC connectors, ±10 V range |
| VGA Video Output | 15-pin D-Sub, compatible with VGA/SVGA monitors |
Technology
Vector Network Analyzer
Applications
Microwave Component Characterization, RF Design and Testing