SpecAtlasHub

N6750 Series - 50W, 100W, 300W Modules

Keysight Technologies (Agilent HP)Agilent HP

The Keysight N6750 Series (part of the N6700 Series mainframe system) comprises high-performance, autoranging DC power modules. These modules offer low noise, high accuracy, and fast programming speeds, designed to simplify system configuration and enhance measurement accuracy, particularly for high-speed transient or pulse events. The autoranging capability allows a single module to cover a wider range of voltage and current outputs.

DC Power SupplyPower ModuleProgrammable Power Supply

Specifications

General

ParameterValue
InterfacesVia N6700 series mainframe: LAN (LXI C), USB 2.0, GPIB
DisplayNone (controlled via N6700 mainframe display or remote interface)
Warm-up Time30 min (to rated specifications)

Physical

ParameterValue
Operating Temperature0 to 55 °C
Dimensions (W×H×D)34 mm (W) x 84 mm (H) x 457 mm (D)
Weight1.0 to 1.3 kg (module dependent)
Output TerminalsFront panel binding posts (accepts banana plugs, spade lugs)

Overview & Key Specifications

ParameterValue
Product Series CompatibilityKeysight N6700 Series Mainframes (N6700B, N6701C, N6702C, N6705C)
Module TypeHigh-Performance Autoranging DC Power Module
Output Channels1 per module
Maximum Output VoltageUp to 100 V (model dependent)
Maximum Output CurrentUp to 15 A (model dependent)
Maximum Output Power50 W, 100 W, or 300 W (model dependent)

Output Performance Specifications

ParameterValue
Voltage Programming Range0 to 20 V, 0 to 50 V, 0 to 60 V, or 0 to 100 V (model dependent)
Current Programming Range0 to 1 A, 0 to 2.5 A, 0 to 3 A, 0 to 5 A, 0 to 6 A, or 0 to 15 A (model dependent)
Voltage Programming Accuracy0.025% of output + 5 mV (up to 50V outputs); 0.025% of output + 10 mV (60V/100V outputs)
Current Programming Accuracy0.04% of output + 2.5 mA (for 1A to 6A outputs); 0.04% of output + 5 mA (for 3A outputs); 0.04% of output + 15 mA (for 15A output)
Load Regulation (Voltage)0.01% of output + 2 mV
Load Regulation (Current)0.02% of output + 2 mA
Line Regulation (Voltage)0.01% of output + 2 mV
Line Regulation (Current)0.02% of output + 2 mA
Ripple and Noise (Voltage Peak-to-Peak)<10 mV (20Hz-20MHz), typical for 50V/100V outputs
Ripple and Noise (Voltage RMS)<1 mV (20Hz-20MHz), typical for 50V/100V outputs
Ripple and Noise (Current RMS)<2 mA (20Hz-20MHz), typical
Transient Response Time<1 ms (to recover to within 0.1% of programmed voltage for a 50% load change)
Output Rise Time (typical)<2 ms (full load)
Output Fall Time (typical)<2 ms (full load)
Over Voltage Protection (OVP) ThresholdProgrammable, 110% to 120% of maximum rated voltage
Over Current Protection (OCP) ThresholdProgrammable, 105% to 110% of maximum rated current
Remote Sensing CapabilityYes

Measurement Performance Specifications

ParameterValue
Voltage Measurement RangeFull output range
Current Measurement RangeFull output range
Voltage Measurement Accuracy0.025% of reading + 5 mV (up to 50V outputs); 0.025% of reading + 10 mV (60V/100V outputs)
Current Measurement Accuracy0.04% of reading + 2.5 mA (for 1A to 6A outputs); 0.04% of reading + 5 mA (for 3A outputs); 0.04% of reading + 15 mA (for 15A output)
Voltage Measurement Resolution1 mV
Current Measurement Resolution0.1 mA (for lower currents), 1 mA (for higher currents)

Advanced Features & Capabilities

ParameterValue
High-Speed DigitizerUp to 50 kHz sampling rate, 128 kpts memory
Output SequencerYes, via N6700 mainframe
Data LoggerYes, via N6700 mainframe
Arbitrary Waveform GenerationYes, with high-speed digitizer

Programming & Interfaces

ParameterValue
Programming LanguageSCPI (Standard Commands for Programmable Instruments)
Driver SupportIVI-COM, IVI-C, LabVIEW
Remote Control Software Compatibilitycustom applications

Environmental Characteristics

ParameterValue
Storage Temperature Range-40 to 70 °C
Operating Humidity Range15% to 85% RH, non-condensing
Storage Humidity RangeUp to 90% RH, non-condensing
Operating AltitudeUp to 2000 m (6561 ft)
Non-operating AltitudeUp to 4600 m (15091 ft)
Pollution Degree2

Physical Characteristics

ParameterValue
Module Slot Count1
Cooling MethodFan-cooled (via mainframe)

Compliance & Certifications

ParameterValue
Safety StandardsIEC/EN 61010-1, CSA C22.2 No. 61010-1
Electromagnetic Compatibility (EMC)IEC/EN 61326-1, CISPR 11
CE MarkYes
CSA/UL ListingYes
RoHS ComplianceYes

Ordering Information

ParameterValue
Available ModelsN6751A (50W), N6752A (100W), N6753A (300W), N6754A (300W), N6755A (300W), N6756A (300W), N6757A (300W), N6758A (300W)
Included AccessoriesConnector block, Installation guide
Warranty Period3 years
Recommended Calibration Interval1 year

Output Characteristics

ParameterValue
Output Isolation (Output to Chassis)>10 GΩ in parallel with <1000 pF (typical)
Max Output Float Voltage (to chassis)60 VDC

Protection

ParameterValue
Over Temperature Protection (OTP)Yes, automatic shutdown
Reverse Voltage ProtectionYes, protects up to rated output voltage

Performance

ParameterValue
Remote Sense Lead CompensationUp to 0.5 Ω per lead (1 Ω total)
Voltage Program Speed (Up)< 1 ms (typical)
Voltage Program Speed (Down)< 1 ms (typical)
Current Program Speed (Up)< 1 ms (typical)
Current Program Speed (Down)< 1 ms (typical)
Max Remote Sense Lead Compensation1 V per lead
AWG Sample RateUp to 50 kHz
AWG Buffer Size65535 points
Trigger Latency< 100 µs (typical)

Measurement

ParameterValue
Digitizer Sample RateUp to 50 kHz
Digitizer Resolution16-bit

Interfaces

ParameterValue
Hardware TriggerTrigger In/Out

Technology

Programmable DC Power Supply, Autoranging, High-Speed Digitizer

Applications

Automated Test Equipment (ATE), Device Under Test (DUT) characterization, General purpose benchtop and system test, Component testing, System power validation