The Rohde & Schwarz FSP30 is a high-performance spectrum analyzer spanning 20 Hz to 30 GHz, engineered to serve both advanced development and demanding production environments. It features exceptional level measurement accuracy, outstanding RF characteristics, and quick trace acquisition rates, combined with standard measurement suites like ACP(R) and TOI.
Specifications
General
| Parameter | Value |
|---|---|
| Display | 21 cm (8.4 in) Color TFT LCD, 640 x 480 pixels |
| Warm-up Time | 30 minutes |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 100 V to 240 V AC, 50 Hz to 400 Hz |
| Operating Temperature | 5 °C to 40 °C |
| Dimensions (W×H×D) | 435 mm × 192 mm × 460 mm |
| Weight | 16 kg |
Frequency Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 9 kHz to 30 GHz |
| Resolution Bandwidth (RBW) Range | 1 Hz to 10 MHz |
Spectral Purity and Noise
| Parameter | Value |
|---|---|
| Displayed Average Noise Level (DANL) | -155 dBm (1 Hz) |
| Phase Noise @ 10 kHz Offset | -113 dBc/Hz (typ., CF 500 MHz) |
| Phase Noise @ 10 MHz Offset | -145 dBc/Hz (typ., CF 500 MHz) |
Amplitude and Dynamic Range
| Parameter | Value |
|---|---|
| Total Measurement Uncertainty | 0.5 dB |
Bandwidth (RBW / VBW)
| Parameter | Value |
|---|---|
| Channel Filter Range | 100 Hz to 5 MHz |
| FFT Filter Range | 1 Hz to 30 kHz |
| Filter Types | Gaussian, RRC, FFT, Channel, EMI |
Measurement and Detection Functions
| Parameter | Value |
|---|---|
| Standard Measurement Routines | TOI, ACP(R), OBW, CCDF, APD |
| Fast ACP in Time Domain | Supported |
| Measurement Speed | Up to 80 measurements/s (including trace transfer via GPIB) |
| Application Firmware Support | GSM/EDGE, Bluetooth, WCDMA/HSDPA/TD-SCDMA, CDMA2000/1xEV-DV/1xEV-DO, WLAN |
| Detector Types | Quasi-peak, RMS, Auto Peak, Peak, Min Peak, Sample |
RF Inputs and Outputs
| Parameter | Value |
|---|---|
| RF Input Impedance | 50 Ohms |
| RF Input Connector | 3.5 mm male test port (compatible with N-type female adapter) |
Frequency
| Parameter | Value |
|---|---|
| Span Range | 0 Hz, 10 Hz to 30 GHz |
| Reference Frequency Aging | 1 x 10^-6 per year (standard); 1 x 10^-7 per year (with option FSP-B4) |
| Reference Frequency Temperature Stability | 1 x 10^-6 (0 °C to 50 °C) |
| Reference Frequency Temperature Stability (OCXO) | 1 x 10^-8 (0 °C to 50 °C, with FSP-B4 option) |
Bandwidth
| Parameter | Value |
|---|---|
| Video Bandwidth (VBW) Range | 1 Hz to 10 MHz |
Sweep
| Parameter | Value |
|---|---|
| Sweep Time (Span = 0 Hz) | 1 µs to 16000 s |
| Sweep Time (Span >= 10 Hz) | 2.5 ms to 16000 s |
| Number of Sweep Points | 125 to 8001 |
Amplitude
| Parameter | Value |
|---|---|
| Maximum Safe Input Level (CW) | 30 dBm (1 W) |
| Maximum Input DC Voltage | 0 V |
Triggering & Sync
| Parameter | Value |
|---|---|
| Trigger Sources | Free Run, Video, External, IF Power |
| External Reference Input | 10 MHz |
Performance
| Parameter | Value |
|---|---|
| Third Order Intercept (TOI) | > 16 dBm (typ. 18 dBm @ 2 GHz) |
| 1 dB Compression Point | 0 dBm (nominal, 0 dB RF attenuation, > 10 MHz) |
RF Input
| Parameter | Value |
|---|---|
| RF Attenuation Range | 0 dB to 75 dB |
| RF Attenuation Step Size | 5 dB |
| Maximum Safe Pulse Input Voltage | 150 V (pulse width < 10 µs, duty cycle < 1%, RF attenuation >= 10 dB) |
| Maximum Safe Pulse Input Energy | 10 mWs (pulse width 10 µs, RF attenuation >= 10 dB) |
Outputs
| Parameter | Value |
|---|---|
| IF Output Frequency | 21.4 MHz |
| Video Output Voltage | 0 V to 1 V (open circuit, proportional to trace display) |
| Noise Source Control Voltage | 0 V / 28 V (BNC, max. 100 mA) |
| Probe Power Output | +15 V DC, -12.6 V DC (max. 150 mA) |
Environmental
| Parameter | Value |
|---|---|
| Storage Temperature Range | -40 °C to +70 °C |
Compliance
| Parameter | Value |
|---|---|
| EMC/EMI Standards | EN 55011 Class B, EN 61326-1 |
| Safety Standards | EN 61010-1, UL 3111-1, CAN/CSA-C22.2 No. 1010.1 |
Technology
Superheterodyne Spectrum Analysis
Applications
RF and Microwave Testing, Wireless Communications Development, Spectrum Monitoring