Rohde & Schwarz

Rohde & Schwarz provides a diverse range of signal generators, spanning basic analog models to multi-path vector instruments. For analog RF generation, the Rohde & Schwarz SMA100A operates from 9 kHz to 6 GHz with high spectral purity, delivering a typical phase noise of -135 dBc/Hz at a 1 GHz carrier with a 20 kHz offset. The Rohde & Schwarz SMB100A covers up to 40 GHz depending on configuration, while the general-purpose Rohde & Schwarz SML02 and Rohde & Schwarz SML03 cover up to 2.2 GHz and 3.3 GHz respectively.

For complex modulated signals, the Rohde & Schwarz SMW200A vector signal generator offers up to two independent RF paths and supports frequencies up to 67 GHz with an internal RF modulation bandwidth of up to 2 GHz. The Rohde & Schwarz SMU200A also supports two RF paths up to 6 GHz, and the Rohde & Schwarz SMBV100A provides internal signal generation up to 6 GHz with a baseband RF modulation bandwidth of up to 120 MHz.

The spectrum and signal analyzer catalog ranges from highly portable field instruments to advanced benchtop systems. The handheld Rohde & Schwarz FSH series is optimized for field service and includes the Rohde & Schwarz FSH3 (100 kHz to 3 GHz), the Rohde & Schwarz FSH4 (up to 3.6 GHz), the Rohde & Schwarz FSH6 (models 06 and 26) (100 kHz to 6 GHz), and the Rohde & Schwarz FSH8 (up to 8 GHz). General-purpose field and benchtop testing is also supported by the Rohde & Schwarz FSL6, which covers 9 kHz to 6 GHz with a 28 MHz I/Q analysis bandwidth.

For high-performance benchtop analysis, the Rohde & Schwarz FSW8 operates from 2 Hz to 8 GHz with an analysis bandwidth of up to 160 MHz. High-frequency RF and microwave measurements are addressed by instruments like the Rohde & Schwarz FSV40, which extends analysis up to 40 GHz.

For component and network characterization, the Rohde & Schwarz ZVA24 is a vector network analyzer operating from 10 MHz to 24 GHz, configurable with 2 or 4 ports and featuring dedicated measurement and reference receivers per port. The Rohde & Schwarz ZVL6 is a compact, bidirectional 2-port network analyzer covering 9 kHz to 6 GHz. For field installation and antenna system maintenance, the Rohde & Schwarz ZVH4 cable and antenna analyzer supports return loss, VSWR, and distance-to-fault measurements up to 3.6 GHz.

Power measurements are addressed by dedicated base units and sensors. The Rohde & Schwarz NRP/NRP2 base unit supports up to four simultaneous measurement channels and a system frequency range up to 110 GHz with compatible sensors. The Rohde & Schwarz NRT directional power meter monitors forward and reflected power under operational conditions between 200 kHz and 4 GHz. For single-channel applications, the Rohde & Schwarz NRV is compatible with URV5-Z and NRV-Z series sensors.

For mobile wireless communication systems, the Rohde & Schwarz CMU200 is a modular tester covering 10 MHz to 2.7 GHz, supporting both signaling and non-signaling test modes for multiple cellular standards.